Panasonic Hospitality Lcd Hdtv Th 32lru20 Operating Instructions
Here you can view all the pages of manual Panasonic Hospitality Lcd Hdtv Th 32lru20 Operating Instructions. The Panasonic manuals for Television are available online for free. You can easily download all the documents as PDF.
Page 31
31 FAQs, etc. Technical Information MessageMeaning Please insert SD memory card into the SD slot at the side of the TV. The card is not inserted. No photos The card has no data or this type of data is not supported. Cannot read file The file is broken or unreadable. The TV does not support the format. Data format for SD Card browsing Photo:Still images recorded with digital still cameras compatible with JPEG fi\ les of DCF* and EXIF** standards Data format: Baseline JPEG (Sub-sampling: 4:4:4,...
Page 32
32 HDMI connection HDMI (high-definition multimedia interface) allows you to enjoy high-d\ efinition digital images and high-quality sound by connecting the TV unit and the devices. HDMI-compatible equipment (*1) with an HDMI or DVI output terminal, su\ ch as a set-top box or a DVD player, can be connected to the HDMI connector using an HDMI compliant (fully wired) cable. HDMI is the world’s first complete digital consumer AV interface complying with a non-compression standard. If the external...
Page 33
33 FAQs, etc. Technical Information 1 678 39 4510 1514 13 12112 Input signal that can be displayed * Mark: Applicable input signal for Component (Y, PB, PR), HDMI and PC horizontal frequency (kHz) vertical frequency (Hz) COMPONENT HDMI PC 525 (480) / 60i 15.7359.94**525 (480) /60p 31.4759.94**750 (720) /60p 45.0059.94**1,125 (1,080) /60i 33.7559.94**1,125 (1,080)/60p 67.4359.94*1,125 (1,080)/60p 67.5060.00*1,125(1,080)/24p 26.9723.98*1,125(1,080)/24p 27.0024.00*640 × 400 @70 31.4770.08*640 × 480 @60...
Page 34
34 Technical Information (Continued) SERIAL CRTL (RS232C (M3)) terminal connection PC Control of the TVCommunication parameters The TV can be controlled by a personal computer when connected through an RS232C cable (not supplied). The computer will require software which allows sending and receiving of control data through its SERIAL port. Please see required parameters and commands below. Signal level RS-232C compliant Synchronization method Asynchronous Baud rate 9600 bps Parity None Character...
Page 35
35 FAQs, etc. Technical Information SERIAL CTRL (RS232C) command list Functions of gray part are not available during online mode. Control Command Inquiry CommandCall back CommandParameter STANDARD CONTROL POWER ON PON QPW QPW:* “0”(OFF)/“1”(ON) POWER OFF POF VOL level AVL:** QAVQAV:***“000” ~ “100” VOL UP AUU VOL DOWN AUD MUTE AMT:* QAMQAM:*“0”(NO MUTED)/ “1”(MUTED) MUTE(Toggle) AMT ASPECT DAM:**** QASQAS:**** “ZOOM”/“FULL”/“JUST” /“NORM” (4:3)/“HFIL”ASPECT (Toggle) DAM INPUT SELECT CH UP CHU --- ---...
Page 36
36 FA Q Before requesting service or assistance, please follow these simple guid\ es to resolve the problem. If the problem still persists, please contact your local Panasonic deale\ r or Panasonic Service Center for assistance. White spots or shadow images (noise) Check the position, direction, and connection of the antenna. Interference or frozen digital channels (intermittent sound) Change the direction of antenna for digital channels. Check “Signal meter” (p. 25).If the signal is weak,...
Page 37
37 FAQs, etc. Frequently Asked Questions ProblemActions Screen SoundOther If there is a problem with your TV, please refer to the table below to determine the symptoms, then carry \ out the suggested check. If this does not solve the problem, please contact your\ local Panasonic dealer, quoting the model number and serial number (both found on the rear of the TV). Some spots remain bright or dark The LCD panel is made up of a few million pixels and is produced with advanced technology through an...
Page 38
38 Care and Cleaning First, unplug the Power cord plug from the wall outlet. Display panel The front of the display panel has been specially treated. Wipe the pane\ l surface gently using only a cleaning cloth or a soft, lintfree cloth. If the surface is particularly dirty, soak a soft, lint-free cloth in diluted mild liquid dish soap (1 part\ mild liquid dish soap diluted by 100 times the amount of water) and then wring the cloth to remove ex\ cess liquid. Use this cloth to wipe the surface of the...
Page 39
39 FAQs, etc. Specifications Care and Cleaning Specifications Note Design and Specifications are subject to change without notice. Mass and\ Dimensions shown are approximate. * Based on IEC 62087 Ed.2 section 11.6.1 measurement method. TH-32LRU20 TH-37LRU20 TH-42LRU20 Power Source AC 1 10-127 V, 60 Hz Power ConsumptionRated Power Consumption 106 W 159 W206 W On mode Average Power Consumption* 62 W 84 W113 W Standby condition 0.8 W 0.8 W0.9 W Display panelAspect Ratio16:9 Visible screen size (W ×...
Page 40
40 Panasonic Solutions Company Unit of Panasonic Corporation of North America Three Panasonic Way, 2F-5, Secaucus, NJ 07094Panasonic Hospitality LCD HDTVLimited Warranty Models or Parts Part Warranty Labor Warranty Professional Flat Panel Display LIMITS AND EXCLUSIONS There are no express warranties except as listed above. THE WARRANTOR SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING, WITHOUT LIMITION, DAMAGE TO DISCS) RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY...