Panasonic KX-TG585SK Operating Instructions
Have a look at the manual Panasonic KX-TG585SK Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Sub-menu 1Sub-menu 2SettingsCode GreetingRecord greeting*1–#30262 Check greeting–#30363 Pre-recorded*1 (Reset to pre-recorded greeting)–#30463 New message alert *1Outgoing call – On/OffOn #33865 Outgoing call –Notification to– Outgoing call –Remote codeActivate Base unit beepOn #33965 SettingsRing count *12-7 rings < 4 rings > Toll saver#21168 Recording time *11 min < 3 min > Greeting only *2#30568 Remote code*1< 111 >#30666 Screen call Off#31067 Answer on *1––#32762 Answer off *1––#32862 Main menu: “ Voicemail access ”*3 OperationCode Listening to voicemail messages.#33070 Main menu: “ Intercom ” OperationCode Paging the desired unit.#27431 For assistance, please visit www.panasonic.com/support41 Programming TGF37x(en)_1128_ver032.pdf 412014/11/28 16:08:41
Main menu: “Bluetooth ” Sub-menu 1Sub-menu 2SettingsCode Link to cell –1:Add new device *4 (for CELL 1) – 2:Add new device *4 (for CELL 2)Connect *1 / Disconnect *1–#6251*519 #6252*6 Ringer volumeOff –6 #6281 *522 #6282*6 Ringer tone *7< Tone 2 >*5 < Tone 4 >*6#6291 *5– #6292*6 Select unit to ring*1Handset 1-6 < All >#6271 *518 #6272*6 Ring as cell (limited) *1< On (with Talking CID) > On (without Talking CID) Off#6141 *518 #6142*6 Alert settings *1 – Alert On/Off Off#6101 *559 #6102*6 Alert settings *1 – Voice alert Off#6031 *559 #6032*6 Alert settings *1, *8 – Alert tone*5 < Tone 2 >*6#6041 *560 #6042*6 Pair–#6241*517 #6242*6 Unpair–#6111*517 #6112*6 Phonebook transfer––#61857 HeadsetAdd new device *4–#62160 Connect*1 / Disconnect *1–#62260 Pair–#62160 Unpair–#61261 42For assistance, please visit www.panasonic.com/support Programming TGF37x(en)_1128_ver032.pdf 422014/11/28 16:08:41
Sub-menu 1Sub-menu 2SettingsCode SettingsAuto connect*1< 1 min > 3 min 5 min 10 min Off#63218 Cell area code *1–#63320 Cell line only mode*1On < Off >#15719 Cell line select –HandsetCellphone 1 *4 Cellphone 2 *4 < Manual >#63420 Cell line select –Base unit *1< Cellphone 1 >*4 Cellphone 2 *4# G 634 Set PIN *1< 0000 >#61920 International code *1–#11757 Country code *1–#118 Trunk prefix*1–#119 Main menu: “ Set date & time ” Sub-menu 1Sub-menu 2SettingsCode Date and time*1––#10116 Memo alarmAlarm1–3Once Daily Weekly < Off >#72049 Time adjustment *1, *9–< Caller ID auto > Manual#226– Main menu: “ Speed dial ” OperationCode Viewing the speed dial entry.#26138 For assistance, please visit www.panasonic.com/support43 Programming TGF37x(en)_1128_ver032.pdf 432014/11/28 16:08:41
Main menu: “Settings ” Sub-menu 1Sub-menu 2SettingsCode Ring adjustmentsRinger volume *3Off –6 #160– Ringer tone *3, *7, *10 (Handset)< Tone 1 >#161– Interrupt tone *11< On > Off#20125 Silent mode – On/OffOn #23850 Silent mode –Start/End#23750 Silent mode – Select groupHome Cell 1 Cell 2 Group 4-9#24150 Set date & timeDate and time *1–#10116 Memo alarm – Alarm1–3Once Daily Weekly #72049 Time adjustment *1, *9< Caller ID auto > Manual#226– Talking caller ID–< On > Off#16254 Key detector setting *12 – 1:Add new device (for Detector1 )*13 – 2:Add new device (for Detector2 ) – 3:Add new device (for Detector3 ) – 4:Add new device (for Detector4 )Change name *1Detector1#6561– Detector2*14#6562*14 Detector3 *14#6563*14 Detector4 *14#6564*14 Registration–#6571– #6572*14 #6573*14 #6574*14 Deregistration–#6581– #6582*14 #6583*14 #6584*14 44For assistance, please visit www.panasonic.com/support Programming TGF37x(en)_1128_ver032.pdf 442014/11/28 16:08:41
Sub-menu 1Sub-menu 2SettingsCode Call block*1Block a single number–#21732 Block range of numbers–33 Block unknown CID ( CID : Caller ID)Block #24033 One ring for blocked call No#17334 Speed dial––#26138 Record greeting *1––#30262 Voicemail*3Save VM access# *1 ( VM : Voicemail)–#33169 VM tone detect *1< On > Off#33269 LCD contrast (Display contrast)–Level 1–4 #145– Handset name––#10453 Display name–On < Off >#10553 Auto intercom–On #27331 Key tone– Off#165– Caller ID edit (Caller ID number auto edit)–< On > Off#21455 Auto talk *15–On < Off >#20022 For assistance, please visit www.panasonic.com/support45 Programming TGF37x(en)_1128_ver032.pdf 452014/11/28 16:08:41
Sub-menu 1Sub-menu 2SettingsCode Set tel line*3Set dial mode *1Pulse < Tone >#12016 Set flash time *1, *16900 ms < 700 ms > 600 ms 400 ms 300 ms 250 ms 200 ms 160 ms 110 ms 100 ms 90 ms 80 ms#12122 Set line mode *1, *17A < B>#122– Call sharing *1–< On > Off#19424, 29 RegistrationRegister handset–#13053 Deregistration *2–#13153 Power failure–< Auto > Off#15225 Change languageDisplay< English > Español#11016 Voice prompt *1< English > Español#11216 Main menu: “ Customer support ” OperationCode Displaying customer support Web address.#680– Main menu: “Baby monitor ” Sub-menu 1Sub-menu 2SettingsCode On/Off–On #26851 Sensitivity level–Low High#26952 46For assistance, please visit www.panasonic.com/support Programming TGF37x(en)_1128_ver032.pdf 462014/11/28 16:08:41
Main menu: “Key detector ”*12 Sub-menu 1Sub-menu 2SettingsCode Search––#655– Battery check–– n Base unit Main menu: W “Phonebook ” OperationCode Viewing the phonebook entry.#28037 Main menu: “Caller list ” OperationCode Viewing the caller list.#21354 Main menu: “Answer device ” Sub-menu 1Sub-menu 2SettingsCode Screen call– Off#31067 Main menu: “ Bluetooth ” Sub-menu 1Sub-menu 2SettingsCode Link to cell – Cellular phone 1 *4 – Cellular phone 2 *4Ringer volumeOff –6 #6281 *528 #6282*6 Alert settings *1 – Alert On/Off Off#6101 *559 #6102*6 Alert settings *1 – Voice alert Off#6031 *559 #6032*6 Cell line< Cellphone 1 >*4 Cellphone 2 *4–#63420 For assistance, please visit www.panasonic.com/support47 Programming TGF37x(en)_1128_ver032.pdf 472014/11/28 16:08:41
Main menu: “Settings ” Sub-menu 1Sub-menu 2SettingsCode Ring adjustmentRinger volume *3Off –6 #160– Interrupt tone *11< On > Off#20129 Silent mode – On/OffOn #23850 Silent mode –Start/End#23750 Silent mode –Select groupHome Cell 1 Cell 2 Group 4–9#24150 Talking CID–On #16254 Call block *1Block a single #–#21732 Block range of #–33 Block unknownBlock < Unblock >#24033 Ring once No#17334 LCD contrast (Display contrast)–Level 1–6 #145– Auto intercom–On < Off >#27331 Caller ID edit (Caller ID number auto edit)–< On > Off#21455 Change language (Display)–< English > Español#11016 Main menu: “ Cust. Support ” OperationCode Displaying customer support Web address.#680– *1 If you program these settings using one of the units, you do not need to program the same item using another unit. *2 This menu is not displayed when scrolling through the display menus. It is only available in direct command code. *3 When the cellular line only mode is turned on, these menus are not displayed (page 19). *4 After the Bluetooth device is paired, the device name is displayed. *5 For CELL 1 *6 For CELL 2 48For assistance, please visit www.panasonic.com/support Programming TGF37x(en)_1128_ver032.pdf 482014/11/28 16:08:41
*7 The preset melodies in this product (“Tone 3 ” - “Melody 10 ”) are used with permission of © 2009 Copyrights Vision Inc. *8 The preset melodies in this product ( “Tone 1 ” and “Tone 2 ”) are used with permission of © 2013 Copyrights Vision Inc. *9 This feature allows the unit to automatically adjust the date and time each time caller information including date and time is received. To turn this feature on, select “Caller ID auto ”. To turn this feature off, select “ Manual ”. (Caller ID subscribers only) To use this feature, set the date and time first (page 16). *10 If you subscribe to a distinctive ring service (such as IDENTA-RING), select a tone (tone 1 or 2). If you select a melody, you cannot distinguish lines by their ringers. *11 This tone lets you know when you receive an outside call while you are on another line or an intercom call. If you select “On ”, the tone sounds 2 times. *12 This setting is available when you have the key detector (KX-TGA20). Read the installation manual for more information on the key detector. *13 For models with supplied key detectors, the display shows “ 1: Detector1 ”. *14 If you register 2 or more key detectors. *15 If you subscribe to a Caller ID service and want to view the caller’s information after lifting up the handset to answer a call, turn off this feature. *16 The flash time depends on your telephone exchange or host PBX. Contact your PBX supplier if necessary. The setting should stay at “700 ms ” unless pressing MFLASH N fails to pick up the waiting call. *17 Generally, the line mode setting should not be changed. This setting automatically maintains receiver volume at the proper level depending on the current telephone line condition. Set the line mode to “A ” if telephone line condition is not good. Alarm An alarm sounds at the set time for 1 minute and is repeated 5 times at 5 minute intervals (snooze function). A text memo can also be displayed for the alarm. A total of 3 separate alarm times can be programmed for each handset. You can set one of 3 different alarm options (once, daily, or weekly) for each alarm time. Important: R Make sure the unit’s date and time setting is correct (page 16). Handset 1 MMENU N#720 2 Mb N: Select the desired alarm. a M SELECT N 3Mb N: Select the desired alarm option. a M SELECT N “Off ” Turns alarm off. Go to step 10. “ Once ” An alarm sounds once at the set time. “ Daily ” An alarm sounds daily at the set time. Go to step 5. “ Weekly ” Alarm sounds weekly at the set time(s). 4 Proceed with the operation according to your selection in step 3. nOnce: Enter the desired month and date. a M OK N n Weekly: M b N: Select the desired day of the week and press MSELECT N. a M OK N For assistance, please visit www.panasonic.com/support49 Programming TGF37x(en)_1128_ver032.pdf 492014/11/28 16:08:41
5Set the desired time. 6 *: Select “AM ” or “PM ”. a M OK N 7 Enter a text memo (10 characters max.). a M OK N 8 Mb N: Select the desired alarm tone. a M SELECT N R We recommend selecting a different ringer tone from the one used for outside calls. 9 Mb N: Select the desired snooze setting. a M SAVE N 10 MSELECT N a M OFF N Note: R Press MSTOP N to stop the alarm completely. R When the handset is in use, the alarm will not sound until the handset is in standby mode. R Press any dial key or MSNOOZE N to stop the sound but keep the snooze function activated. R If you want to make an outside call when the snooze function is activated, please stop the snooze function before making the call. Silent mode Silent mode allows you to select a period of time during which the handset and/or base unit will not ring for outside calls. This feature is useful for time periods when you do not want to be disturbed, for example, while sleeping. Silent mode can be set for each unit. Using the phonebook’s group feature (page 36), you can also select groups of callers whose calls override silent mode and ring the unit (Caller ID subscribers only). Important: R Make sure the unit’s date and time setting is correct (page 16). R If you have set the alarm, the alarm sounds even if the silent mode is turned on. Turning silent mode on/off Handset 1 MMENU N#238 2 Mb N: Select the desired setting. a M SAVE N R If you select “Off ”, press MOFF N to exit. 3 Enter the desired hour and minute you wish to start this feature. 4 *: Select “AM ” or “PM ”. a M OK N 5 Enter the desired hour and minute you wish to end this feature. 6 *: Select “AM ” or “PM ”. 7 MSAVE N a M OFF N Base unit 1 MMENU N#238 2 Mb N: Select the desired setting. a M SAVE N R If you select “Off ”, press MEXIT N to exit. 3 Enter the desired hour and minute you wish to start this feature. 4 MAM/PM N: Select “AM ” or “PM ”. a M OK N 5 Enter the desired hour and minute you wish to end this feature. 6 MAM/PM N: Select “AM ” or “PM ”. 7 MSAVE N a M EXIT N Changing the start and end time Handset / Base unit 1 MMENU N#237 2 Continue from step 3 for handset or step 3 for base unit, “Turning silent mode on/ off”, page 50. Selecting groups to bypass silent mode Handset / Base unit 1 MMENU N#241 50For assistance, please visit www.panasonic.com/support Programming TGF37x(en)_1128_ver032.pdf 502014/11/28 16:08:41