Panasonic Kx Tgm430 Operating Instructions Manual

							Menu list
T
o access the features, there are 2 methods.
n Scrolling through the display menus
1 MMENU N
2 Press  MC N or  MD N to select the desired main menu.  a M SELECT N
3 Press  MC N or  MD N to select the desired item from the next sub-menus.  a M SELECT N
4 Press  MC N or  MD N to select the desired setting.  a M SAVE N
n Using the direct command code
1 MMENU N a  Enter the desired code.
Example:  Press MMENU N#101 .
2 Select the desired setting.  a M SAVE N
Note:
R To exit the operation, press  MOFF N.
R In the following table, < > indicates the default settings.
R In the following table,   indicates the reference page number.
R D

isplay menu order and sub-menu may vary depending on your model.
Display menu tree and direct command code table
Main menu:   W “Phonebook ”Operation Code
Viewing the phonebook entry.
#28048Main menu:   “
C
aller list ”Operation Code
Viewing the caller list.
#21363Main menu:   “
A
nswering device ”Sub-menu 1 Sub-menu 2 Settings Code
Play new message
––#32372
Play all message ––#32472
Erase all
m
 essage *1 –
–#32573
Greeting Record greeting*
 1
–#30271
Check greeting –#30372
Pre-recorded *
 1
(Reset to pre-recorded greeting) –
#30472 For assistance, please visit http://shop.panasonic.com/support
51 Programming
TGM43x(en)_0426_ver031.pdf   512016/04/26   10:55:19       
						

							Sub-menu 1 Sub-menu 2 Settings Code
New message
a
lert *1 Outgoing call
–
O
n/Off On
<
O
ff > #338
74
Outgoing call
– N

otification to –
Outgoing call
– R

emote code Activate
<
I
nactivate >
Base unit beep On  #339
74
Settings Ring count*
 1
Toll saver
2
-7 rings
 #211
76
Recording time *
 1

1 min
Greeting only *2#305
77
Remote code *
 1
 #30675
Screen call
– H

andset <
On >
Off #310
76
Screen call
– B

ase unit *1 <
On >
Off #
G 310
Answer on *
 1
––#32771
Answer off *
 1
– –#32871Main menu:   “
V
oicemail access ”*3 Operation Code
Listening to voicemail messages.
#33079Main menu:   “
I
ntercom ”Operation Code
Paging the desired unit.
#2744452
For assistance, please visit http://shop.panasonic.com/supportProgramming
TGM43x(en)_0426_ver031.pdf   522016/04/26   10:55:19      
						

							Main menu:   “
Bluetooth ”Sub-menu 1 Sub-menu 2 Settings Code
Link to cell
–
1

:Add new
device *4
(for CELL 1)
– 2:Add new
device *4
(for CELL 2) Connect
* 1
/
Disconnect *1 –
#6251* 5
36
#6252 *
 6
Ringer volume
– H

andset Off
–6 
#6281* 5
40
#6282 *
 6
Ringer volume
– B

ase unit *1Off
–10 
#G 6281 *5
40
# G 6
282 *6
Ringer tone
– H

andset *7, *8,
 *9 <
Ringer 2 >*5
< Ringer 4 >*6 #6291
* 5
–
#6292 *
 6
Ringer tone
– B

ase unit *1, *8,
 *9 <
Ringer 2 >*5
< Ringer 4 >*6 #
G 6291 *5
–
# G 6
292 *6
Select unit to
r
 ing *1 <
All >
Handset 1-6 #6271
* 5
35
#6272 *
 6
Ring as cell
(
 limited) *1 <
On (with
Talking CID) >
On (without
Talking CID)
Off #6141
* 5
35
#6142 *
 6
Alert settings
– A

lert On/Off *1<
On >
Off #6101
* 5
68
#6102 *
 6
Alert settings
– V

oice alert *1<
On >
Off #6031
* 5
68
#6032 *
 6
Alert settings
– A

lert tone <
Tone 1 >*5
< Tone 2 >*6 #6041
* 5
69
#6042 *
 6
Pair –#6241*
 5
34
#6242 *
 6
Unpair –#6111*
 5
34
#6112 *
 6
Phonebook
t
 ransfer –
–#618 66
Headset Add new device*
 4
–#621 69
Connect *
 1
/
Disconnect *1 –
#622 69
Pair –#621 69
Unpair –#612 69 For assistance, please visit http://shop.panasonic.com/support
53 Programming
TGM43x(en)_0426_ver031.pdf   532016/04/26   10:55:19   
						

							Sub-menu 1 Sub-menu 2 Settings Code
Settings
Auto connect* 1
Off

3 min
5 min
10 min #632
35
Cell area code *
 1
–#633 37
Cell line only
m
 ode *1 On
<
O
ff > #157
36
Cell line select
– H

andset <
Manual >
Cellphone 1 *4
Cellphone 2 *4#634
37
Cell line select
– B

ase unit *1<
Cellphone 1 >*4
Cellphone 2 *4#
G 634
Set PIN *
 1
 #61937
International
c
 ode *1 –
#117 66
Country code *
 1
–#118
Trunk prefix *
 1
–#119Main menu:   “
S
et date & time ”Sub-menu 1 Sub-menu 2 Settings Code
Date and time
*
 1
– –#10124
Memo alarm Alarm1-3

Once
Daily
Weekly #720
60
Time adjustment *
 1, *10
– 
Manual #226
–Main menu:   “
M
emory dial ”Operation Code
Viewing the memory dial entry.
#2614954
For assistance, please visit http://shop.panasonic.com/supportProgramming
TGM43x(en)_0426_ver031.pdf   542016/04/26   10:55:19      
						

							Main menu:   “
Settings ”Sub-menu 1 Sub-menu 2 Settings Code
Ring adjustments Ringer volume
(
Incoming)
– Handset *3 Off
–6  #160–
Ringer volume
(
 Incoming)
– Base unit *1,
 *3 Off
–10  #G 160 –
Intercom ringer volume
– H

andset 1–6 
#175–
Intercom ringer volume
– B

ase unit *1 1–10 
#G 175 –
Ringer tone (Incoming)
– H

andset *3,
 *7, *8,
 *9 <
Ringer 1 >#161 –
Ringer tone (Incoming)
– B

ase unit *1,
 *3, *8,
 *9 <
Ringer 1 >#G 161 –
Intercom ringer tone
– H

andset *7, *8,
 *9 <
Ringer 3 >#163 –
Intercom ringer tone
– B

ase unit *1,
 *8,
 *9 <
Ringer 3 >#G 163 –
Silent mode
– H

andset On/Off
–
O
n
– < Off> #238
61
Start/End
–
 #237
61
Select group
H
 ome
Cell 1
Cell 2
Group 4-9 #241
61
Silent mode
– B

ase unit *1 On/Off
–
O
n
– < Off> #
G 238 61
Start/End
–
 #
G 237 61
Select group
H
 ome
Cell 1
Cell 2
Group 4-9 #
G 241 61 For assistance, please visit http://shop.panasonic.com/support
55 Programming
TGM43x(en)_0426_ver031.pdf   552016/04/26   10:55:19   
						

							Sub-menu 1 Sub-menu 2 Settings Code
Audio settings Talking dial
–H
andset <
Off >
Low
High #750
29
Talking dial
– B

ase unit *1 <
Off >
Low
High #
G 750
Talking caller ID
– H

andset <
On >
Off #162
63
Talking caller ID
– B

ase unit *1 On
<
O
ff > #
G 162
Auto boost On
 #782
28
Boost speech On
 #783
29
Key tone
– H

andset Off
<
L
ow >
High #165
30
Key tone
– B

ase unit *1 Off
<
L
ow >
High #
G 165
Interrupt tone
– H

andset *11 <
On >
Off #201
43
Interrupt tone
– B

ase unit *1, 
 *11 <
On >
Off #
G 201
Set date & time Date and time*
 1
–#101 24
Memo alarm
– A

larm1-3 <
Off >
Once
Daily
Weekly #720
60
Time adjustment *
 1, *10

Manual #226
–56
For assistance, please visit http://shop.panasonic.com/supportProgramming
TGM43x(en)_0426_ver031.pdf   562016/04/26   10:55:19  
						

							Sub-menu 1 Sub-menu 2 Settings Code
Key detector
s
etting *12
– 1: Add new
device  (for
Detector1 )*13
– 2: Add new
device  (for
Detector2 )
– 3: Add new
device  (for
Detector3 )
– 4: Add new
device  (for
Detector4 )Change name
* 1
Detector1 #6561–
Detector2 *
 14
#6562 * 14
Detector3 *
 14
#6563 * 14
Detector4 *
 14
#6564 * 14
Registration –#6571 –
#6572 *
 14
#6573 *
 14
#6574 *
 14
Deregistration –#6581 –
#6582 *
 14
#6583 *
 14
#6584 *
 14
Call block *
 1
Block a single number –#217 45
Block range of numbers –46
Block unknown CID
( C

ID : Caller ID) Block
 
< U
nblock >#240
46
One ring for blocked
c
 all <
Yes >
No #173
46
Memory dial ––#261 49
Record greeting *
 1
– –#302 71
Voicemail *
 3
Save VM access# * 1
( VM : Voicemail) –
#331 78
VM tone detect *
 1
 
Off #332
78
LCD contrast
(
 Display contrast) –
Level 1–4  #145–
Handset name ––#104 61
Display name –On 
< O

ff > #105
61 For assistance, please visit http://shop.panasonic.com/support
57 Programming
TGM43x(en)_0426_ver031.pdf   572016/04/26   10:55:19  
						

							Sub-menu 1 Sub-menu 2 Settings Code
Message indicator Handset
–I
ncoming call 
O
ff #278
31
Handset
– N

ew message 
O
ff
Handset
– N

ew VM 
O
ff
Handset
– M

issed call On
<
Off>
Handset
– A

larm 
O
ff
Handset
– A

pplication alert 
O
ff
Base unit *
 1
– Incoming call 
O
ff #
G 278
Base unit *
 1
– New message 
O
ff
Base unit *
 1
– New VM 
O
ff
Base unit *
 1
– Missed call On
<
Off>
Base unit *
 1
– Application alert 
O
ff
Caller ID edit
(
 Caller ID number auto
edit) –
 
Off #214
64
Auto talk *
 15
–On 
< O
ff > #200
39
Set tel line Set dial mode*
 1

Pulse #120
25
Set flash time *
 1, *16
80 ms
9
0 ms
100 ms
110 ms
160 ms
200 ms
250 ms
300 ms
400 ms
600 ms
< 700 ms >
900 ms #121
41
Set line mode *
 1, *17
A < B> #122–58
For assistance, please visit http://shop.panasonic.com/supportProgramming
TGM43x(en)_0426_ver031.pdf   582016/04/26   10:55:19  
						

							Sub-menu 1 Sub-menu 2 Settings Code
Call sharing
* 1
– 
Off #194
41
Registration Register handset –#130 62
Deregistration *
 2
–#131 62
Headset type –
Neckloop
with Mic
Neckloop w/
o Mic #786
33
Change language Display  
Español #110
23
Announcement *
 1
 
Español #112
23Main menu:   “
C
ustomer support ”Operation Code
Displaying customer support Web address.
#680–Main menu:   “
K
ey detector ”*12 Sub-menu 1 Sub-menu 2 Settings Code
Search
––#655 –
Battery check ––*1 If you program these settings using one of the units, you do not need to program the same
i
 tem using another unit.
*2 This menu is not displayed when scrolling through the display menus. It is only available in direct command code.
*3 When the cellular line only mode is turned on, these menus are not displayed (page 36).
*4 After the Bluetooth device is paired, the device name is displayed.
*5 For CELL 1
*6 For CELL 2
*7 The preset ringers in this product ( “Ringer 6 ” -  “Ringer 15 ”) are used with permission
of © 2004 - 2013 Copyrights Vision Inc.
*8 If you subscribe to a distinctive ring service (such as IDENTA-RING), select one of the ringers ( “Ringer 1 ” to  “Ringer 5 ”).
*9 If you select one of the ringers ( “Ringer 1 ” to  “Ringer 5 ”), select the desired frequency
( “ Frequency 1 ” to  “Frequency 6 ”).
*10 This feature allows the unit to automatically adjust the date and time each time caller information including date and time is received.
To turn this feature on, select  “Caller ID auto ”. To turn this feature off, select
“ Manual ”. (Caller ID subscribers only)
To use this feature, set the date and time first (page 24).
*11 This tone lets you know when you receive an outside call while you are on another line or an intercom call. If you select  “On ”, the tone sounds 2 times.
For assistance, please visit http://shop.panasonic.com/support 59 Programming
TGM43x(en)_0426_ver031.pdf   592016/04/26   10:55:19      
						

							*12 This setting is available when you have the key detector (KX-TGA20). Read the installation
m anual for more information on the key detector.
*13 For models with supplied key detectors, the display shows “ 1: Detector1 ”.
*14 If you register 2 or more key detectors.
*15 If you subscribe to a Caller ID service and want to view the caller’s information after lifting up the handset to answer a call, turn off this feature.
*16 The flash time depends on your telephone exchange or host PBX. Contact your PBX supplier if necessary. The setting should stay at  “700 ms ” unless pressing  MFLASH N fails to
pick up the waiting call.
*17 Generally, the line mode setting should not be changed. This setting automatically maintains receiver volume at the proper level depending on the current telephone line condition. Set
the line mode to  “A ” if telephone line condition is not good. Alarm
A
 n alarm sounds at the set time for 1 minute
and repeats 5 times at 5 minute intervals
(snooze function). You can also configure the
alarm to display a text memo. You can set 3
separate alarms for each handset. Each alarm
can be set to sound once, daily, or weekly.
When an alarm sounds, the message indicator
flashes rapidly if the handset message
indicator’s  “Alarm ” setting is enabled
(page 31).
Important:
R Make sure the unit’s date and time setting
is correct (page 24).
1 MMENU N#720
2 Mb N: Select the desired alarm.  a
M SELECT N
3 Mb N: Select the desired alarm option.  a
M SELECT N
“ O
ff ”
Turns alarm off. Go to step 10.
“ O
nce ”
An alarm sounds once at the set time.
“ D
aily ”
An alarm sounds daily at the set time.
Go to step 5.
“ W
eekly ”
Alarm sounds weekly at the set time(s). 4
P
roceed with the operation according to
your selection in step 3.
nOnce:
Enter the desired month and date.  a
M OK N
n Weekly:
M b N: Select the desired day of the week
and press  MSELECT N.  a  M OK N
5 Set the desired time.
6 *: Select  “AM ” or  “PM ”.  a  M OK N
7 Enter a text memo (10 characters max.).
a M OK N
8 Mb N: Select the desired alarm tone.  a
M SELECT N
R If you select one of the ringers
(“ Ringer 1 ” to  “Ringer 5 ”), select
the desired frequency ( “Frequency
1 ” to  “Frequency 6 ”).
R We recommend selecting a different
ringer tone from the one used for
outside calls and intercom calls.
9 Mb N: Select the desired snooze setting.
a  M SAVE N
10 MSELECT N a  M OFF N
Note:
R Press  MSTOP N to stop the alarm completely.
R When the handset is in use, the alarm will
not sound until the handset is in standby
mode.
R Press any dial key or  MSNOOZE N to stop
the sound but keep the snooze function
activated.
R If you want to make an outside call when
the snooze function is activated, please
60 For assistance, please visit http://shop.panasonic.com/supportProgramming
TGM43x(en)_0426_ver031.pdf   602016/04/26   10:55:19