Panasonic Monitor Bt Lh2550p Owners Manual

11
INPUT button ( )
Selects the signal input line.
Each press of the button changes the lines in the following order: VIDEO J SDI1  J SDI2  J YP
BPR/RGB
J  DV I - D.
VIDEO : VIDEO input
SDI1 : Serial digital interface input (HD/SD compatible)
SDI2 : Serial digital interface input (HD/SD compatible)
YP
BPR/RGB : Analog component input (YPBPR) or RGB input also compatible with RGB input from a PC.
DVI-D : DVI-D input (HDCP compatible)
 When the power is turned on, the input line used when the power was...

12
SDI (HD/SD) terminal (BNC)
IN1 : This is the SDI input terminal (compatible with HD/SD automatic switching).
IN2 : This is the SDI input terminal (compatible with HD/SD automatic switching).
SWITCHED OUT : This is the active through-out terminal for the SDI input signal being displayed on thescreen.
 Active SDI through-out is only output when [SDI1] or [SDI2] is selected using the [INPUT] button. It is not
output when something other than SDI is selected. This terminal supports embedded audio.
DVI-D...

13
AC IN (AC inlet) 
This is the AC input terminal.
POWER switch  (ON :  , OFF :  )
This switch turns the AC adapter on and off. 
POWER lamp
This lamp lights green when the POWER switch is set to on.
DC OUT
This is the DC output terminal.
This terminal enables connection of a DC cord. 
AC Adapter
2341
Controls and Their Functions (continued) 

14
Power Supply
1. Connect the power cord to the AC inlet of the ACadapter.
Use the supplied screw (for securing power cord)
and the power cord hook to secure the power cord to
the AC adapter.
2. Slide the supplied DC cord into the DC OUT terminal on the AC adapter until it is locked in
place.
3. Slide the DC cord into the DC IN terminal on the unit until it locks in place. 4. Connect the power cord to an AC outlet.
5. Turn on the POWER switch. The POWER LED
lights green. 
Connecting the power cord
Power...

15
How to Use the On Screen Menu
The screen displays eight types of information: input signal status, picture/volume adjusting menu status,
sharpness display, FUNCTION display, audio level meter display, menu display, TIME CODE display and CLOSED
CAPTION display.
1. Main window  , sub-window   indicationIndicates whether the main window or sub-window 
is displayed. 
 In split screen display, the screen synchronized to 
the reference sync changes with the input signal 
format and “TWO WINDOW SIZE”...

16
Use the menu to open and set up functions.
 When “FUNCTION DISPLAY” ( Jpage 32) is set to
ON, press any of the FUNCTION1 to FUNCTION5
buttons to display the functions assigned to
FUNCTION buttons.
 This display disappears after 2 seconds of inaction.
 “XXXXX” indicates operating status ( Jpage 34,
“Functions displayed during FUNCTION button
operation”).
 A white skeleton bar meter indicates the audio level
for SDI signals.
 You can switch the level display on/off and set the
number of displayed...

17
Use the menu to display and set the time code for
HD-SDI signal input. It also allows you to switch
display mode (VITC, LTC, VUB, LUB).
In VITC and LTC display mode:
 Displays the time code in hours: minutes: seconds:
or frames.
 In drop-frame mode, a different delimiter between
seconds and frames is used.
Note: 
Read errors are displayed as “--:--:--:--” 
In VUB and LUB display modes:
 BG8, BG7, BG6, BG5, BG4, BG3, BG2, BG1 appear
in the stated order. BG: binary group
 The (:) delimiter does not...

18
1. Press [MENU] to display the MAIN menu. 
2. Press [ ,  ] to select a menu and push[ENTER]. 3. Press [ ,  ] to select a sub menu and press
[ENTER].
The settings in the sub menu change to green. 
4. Press [ ,  ] to select a setting, then press [ENTER]. 
To cancel, press [MENU]. 
To return to the previous screen
Press the [MENU] button.
Menu operations
[MAIN MENU]
How to Use the On Screen Menu (continued) 

19
1. Press [ADJUST] to display the picture/volumeadjusting menu.
2. Press [ ,  ] to select item to adjust. The selected item changes to white.
3. Press [ ,  ] to adjust. PHASE 0-60 (30)
CHROMA 0, 10-60 (30)
BRIGHT 0-60 (30)
B.LIGHT [BACKLIGHT] 0-60 (50)
VOLUME 0-60 (0)
(  ) : Factory defaults
 Setting [B.LIGHT/CONT.] to CONT. [CONTRAST] 
in the [SYSTEM CONFIG] menu changes the 
B.LIGHT indication to CONT. enabling CONTRAST 
adjustment.
CONT. [CONTRAST] 0-60 (50)
 Adjustments are not possible under the...

20
You can save and load up to five combinations of menu settings and picture/volume adjustments as user data. You
can also return settings and adjustments to their factory defaults.
User data include the following settings. 
 Menu settings except “SETUP LOAD/SAVE” and “CONTROL/CONTROL” (including button function settings onthe monitor front panel)
 Screen adjustments made in the picture/volume adjustments menu
1. Press [MENU] to display the MAIN menu. 
2. Press [ ,  ] to select the “SYSTEM CONFIG”
menu...