Panasonic Network Camera BL-C30A Getting Started Manual

Operating Instructions
45[For assistance, please call: 1-800-272-7033]
Specifying Pan/Tilt Range
1.
Access the camera (see page 8), and click [Single] at the top of the Top page.
2.Open another web browser, and display the Camera page (see page 42).
3.Align the Single Camera page and the Camera page side to side.
4.Set the pan/tilt range.
 Selecting [Current] displays the current angle of the camera. Select each 
value while adjusting the pan/tilt on the Single Camera page.
Note
The values must be...

Operating Instructions
46
2.8 Changing Authentication Setting and 
Administrator User Name and Password
The Security: Administrator page allows you to change authentication, 
administrator user name and password. The authentication window is displayed, 
and allows the registered users to access the camera.
Notes
 If you access the camera for the first time, the window to set administrator user 
name and password is displayed. Make a note of the user name and password 
so that you will not forget them.
...

Operating Instructions
47[For assistance, please call: 1-800-272-7033]
Note
When users other than an administrator are accessing the camera, [Setup] 
and [Maintenance] tab will not be displayed.
3.Click [Save] when finished.
 New settings are saved.
 When finished, Success! is displayed.Setting Description
General 
AuthenticationAuthentication has 2 phases.
 If you set [Permit access from guest users], the camera 
does not display the authentication window in camera 
access. All guest users can view...

Operating Instructions
48
4.Click [Go to Security: Administrator page].
 The Security: Administrator page is displayed.
Notes
 When the user name and password have been changed, the camera 
displays an authentication window. Enter the user name and password, 
and click [OK].
Administrator/General Users/Guest Users
The camera has 3 user levels (administrator, general users and guest users).
Note
Guest users mean unregistered users. Set [Permit access from guest users] 
on the Security: Administrator...

Operating Instructions
49[For assistance, please call: 1-800-272-7033]
2.9 Logging in to the Camera
If you set [Permit access from guest users] on the Security: Administrator page, 
[Login] is displayed at the top of the page. After you log in as an administrator, you 
can access the Setup page and the Maintenance page.
1.Click [Login] at the top of the page.
2.Check the login mode, and click [Login].
Note
The authentication window is displayed. Enter the user name and password.
3.Enter the user name and...

Operating Instructions
50
2.10 Creating, Modifying or Deleting General Users
The General User page allows you to create, modify or delete general users. Up to 
50 general users can be registered. The access level is set for each general user. 
If you set [Permit access from guest users] on the Security: Administrator page, the 
access level can be set for guest users.
1.Click [General Users] on the Setup page.
2.If you create a general user, click [Create].
3.Set each parameter. When setting [Do not...

Operating Instructions
51[For assistance, please call: 1-800-272-7033]
4.Click [Save] when finished.
 New settings are saved.
 When finished, Success! is displayed.
5.Click [Go to General User page].
 The General User page is displayed.Setting Description
User ID List  Up to 50 general users can be registered.
 The list is used to modify or delete general user settings.
User Name/
Password User Name (6 to 15 characters): Enter the user name.
 Password (6 to 15 characters): Enter the password....

Operating Instructions
52
2.11 Changing Initial Settings on the Single 
Camera page or the Multi-Camera page
The Image Display page allows you to change initial settings (display settings when 
a user accesses the camera) of image resolution, image quality and refresh 
interval. Motion JPEG display time can be set here.
1.Click [Image Display] at the top of the page.
2.Set each parameter.
 Clicking [Cancel] cancels your settings without saving changes. 

Operating Instructions
53[For assistance, please call: 1-800-272-7033]
3.Click [Save] when finished.
 New settings are saved.Setting Description
Image Resolution  Select the image resolution.
640 x 480 pixels (Only for the Single Camera page)
320 x 240 pixels (default)
160 x 120 pixels (Only for the Multi-Camera page)
Image Quality  Select the image quality.
[Favor Clarity] optimizes for good quality.
[Standard] offers standard quality.
[Favor Motion] optimizes for enhanced motion.
Refresh Interval ...

Operating Instructions
54
 When finished, Success! is displayed.
4.Click [Go to Image Display page].
 The Image Display page is displayed.