Home > Panasonic > Recorder > Panasonic Network Camera Recorder Operating Instructions

Panasonic Network Camera Recorder Operating Instructions

    Download as PDF Print this page Share this page

    Have a look at the manual Panasonic Network Camera Recorder Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Operating Instructions
    21
    1.7 Performing License Registration
    If the license is not registered, the License Registration window is displayed. 
    Click [Issue a license key on online registration] to register a license.
    Follow the steps below to register a license.
    1.7.1 Registering a New License
    1.Display the License Registration window.
     If the license is not registered, the License Registration window is 
    displayed.
     You can also display the window by selecting [Help] [License 
    Registration].
    2.Enter the supplied registration code and license key, and click [OK].
     The registration code and license key are included on the attached 
    registration code stickers.
     Characters are case sensitive.
     The following window is displayed. 
    						
    							Operating Instructions
    22
    3.Click [OK].
    Note
    If the following window is displayed, the registration code or license key is 
    incorrect. Confirm them, and enter them again.
    Note
    If the registration is complete, [License Registration] on the menu bar is grayed 
    out.
    Note
    The registration code and license key cannot be reissued even if they are lost. 
    Please keep them secure. 
    						
    							Operating Instructions
    23
    2 Software Operation
    2.1 Selecting a Folder to Save Images
    This software records camera images to the hard disk on your PC. The folder can 
    be changed. After the camera is registered, destination folders are automatically 
    created in the selected folder. The recorded images are saved in the destination 
    folders.
     If the destination folder is not selected, the recorded images are saved into the 
    destination folders at the destination folder where Network Camera Recorder 
    is installed.
     You can change the destination folder to another folder or external hard disk 
    drives.
    Notes
     The folder must have more than 100 MB free capacity.
     The level of the folder-hierarchy depth must be within 6 to prevent the system 
    from getting unstable.
     The recorded images in the destination folder are displayed on the screen. If 
    you change the destination folder, the recorded images in the former folder are 
    not displayed.
     File sizes of recorded images listed below can be used as a baseline. (1 frame 
    size)
     Recorded capacity can be calculated by 
    Size (KB) x Frame Rate (frames per second) x time (second).
    E.g.
    640 x 480 resolution, Favor Clarity and 12 frames per second for an hour 
    settings
    50 (KB) x 12 (fps) x 3,600 (s) = 2,160,000 (About 2.06 GB)
    If the audio is attached, add 4 KB per second.
    2,160,000 (KB) + 4 (KB) x 3,600 (s) = 2,174,400 (About 2.08 GB) Resolution ItemsFavor 
    ClarityStandardFavor 
    Motion
    640 x 480 File SizeAbout 
    50 KBAbout 
    33 KBAbout 
    20 KB
    320 x 240 File SizeAbout 
    25 KBAbout 
    16 KBAbout 
    8 KB
    160 x 120 File SizeAbout 
    7 KBAbout 
    5 KBAbout 
    3 KB 
    						
    							Operating Instructions
    24
    1.Start this software and select [Tools] [Preferences] [Destination Folder] on 
    the menu bar.
     The destination folder page is displayed. 
    						
    							Operating Instructions
    25
    2.Click [Browse...].
     The selecting folder page is displayed.
    3.Select the destination, and click [OK] .
     Create the folder in advance.
    4.Set the hard disk free space.
     Set enough capacity (100 MB or greater) as your destination folder to 
    prevent the system from getting unstable.
    5.Click [OK].
    Notes
     Recorded images are saved in the following folder.
     If the image cannot be recorded, error message is displayed.
    Do not manually delete, move or change any files in the index folder 
    or data folder.
    NCR2
    data Folder to store recorded imagesDestination folder
    Folder to store data to search 
    recorded images
    index 
    						
    							Operating Instructions
    26
    2.2 Automatically Backing up Recorded Images
    Recorded images can be backed up automatically at the specified time.
    1.Select [Tools] [Preferences] [Backup] on the menu bar.
     The backup setting page is displayed.
    2.Set the parameters, and click [OK].
    (a)
    (b)
    (c) Check the box. 
    						
    							Operating Instructions
    27
    Parameters
    Notes
     Backup feature automatically creates the last dated folder, and copies the 
    recorded images and data for search in the destination folder. 
     Backup feature backs up only newly-recorded images after the last 
    backup was executed.
     If the capacity has reached the limit, the backup is stopped, and error 
    message is displayed (see page 91).
     The backup images can be searched. Select [Backup Image] on the 
    search page (see page 63).
     The recording operation of this software may be delayed during backup.
     If images are recorded during backup, the recorded images will be backed 
    up next time.
    Do not manually delete, move or change any files in the index folder 
    or data folder in the backup folder. (a) Select your destination folder for backup. See page 24 for how to 
    access the backup page.
     Create the folder in advance.
     The level of the folder-hierarchy depth must be within 6 to prevent 
    the system from getting unstable.
    (b) Set the hard disk free space to stop backing up before the system 
    becomes full.
     Set enough capacity (100 MB or greater) as your destination 
    folder to prevent the system from getting unstable.
    (c) Set the date and time to execute backup. 
    						
    							Operating Instructions
    28
    2.3 Using a Proxy Server
    You need to set the following settings to monitor the camera on the Internet you 
    using a proxy server. (You cannot connect to the camera without the proxy 
    settings.)
    If you do not use a proxy server, this setting is not required.
    1.Select [Tools] [Preferences] [Network Connection] on the menu bar.
     The proxy setting page is displayed.
    2.Check [Use a proxy server], set the parameters, and click [OK]. 
    						
    							Operating Instructions
    29
    Setting Description
    Proxy Address and 
    Po r tEnter the IP address of proxy server and port number. Enter 
    them after asking your administrator.
     Enter the alphanumeric characters. (Enter only the 
    numeric character for port number.)
    Proxy User Name 
    and Proxy 
    PasswordEnter the user name and password for the proxy server, if 
    required. Enter them after asking your administrator.
     Enter the alphanumeric characters. 
    						
    							Operating Instructions
    30
    2.4 Registering the Camera
    Before you can view or record images, each camera must be configured on this 
    software.
     If you change the destination folder from the default folder of this software, 
    select a folder to save images in advance (see page 23).
     The camera information can be imported and exported (see page 72).
    2.4.1 Creating New Camera
    1.Select [Camera] [Create New Camera] on the menu bar.
     You can create a camera on the menu displayed by right-clicking on the 
    camera list (see page 66).
     The create new camera page is displayed.
    2.Set the parameters and click [OK].
     The camera preview is displayed on the camera list. Page Selection Tab
    Basic Settings : Displays the setup page for the camera name and IP 
    address (see page 31).
    Image  Settings : Displays the setup page for the image size and recording 
    method (see page 33).
    Recording Capacity 
    Limit: Displays the setup page for the recording capacity limit 
    value (see page 34).
    Motion Detection : Displays the setup page for the motion detection 
    recording (see page 35).
    Keyword : Displays the setup page for recorded image keyword 
    (see page 37). 
    						
    All Panasonic manuals Comments (0)

    Related Manuals for Panasonic Network Camera Recorder Operating Instructions