Panasonic Network Camera Recorder Operating Instructions

							Operating Instructions
71
7.Select the location, and click [OK].
 JPEG conversion is started.
 If JPEG conversion is complete, the following window is displayed.
 JPEG-converted images are saved into the created folder in the location. 
The folder is created for each 1,000 images.
Notes
 If you do not set the time, all selected images are converted to JPEG 
files.
 If it is canceled, images are saved till it is canceled. 
						

							Operating Instructions
72
2.13 Other Features
2.13.1 Importing the Camera Information
This software can import the camera information. The camera information can be 
imported to this software on another PC.
1.Select [Tools] [Import Camera Settings] on the menu bar.
 The import file selection window is displayed.
 To import the camera information from BB-HNP60, select [BB-HNP60 
Camera Definition File] at the file type. To import from this software, select 
[Camera Definition File].
2.Select a file and click [Open].
 The camera information is imported.
Notes
 This software can import camera information from BB-HNP60 or this 
software.
 Setting information cannot be imported if you cannot access the 
target camera for the setting information.
2.13.2 Exporting the Camera Information
This software can export the camera information. The camera information can be 
exported for this software on another PC.
1.Select [Tools] [Export Camera Settings] on the menu bar.
 The export file save window is displayed.
2.Select the location, and click [Save].
 The camera information is exported.This software: All camera information can be imported.
BB-HNP60: Basic settings and image settings can be imported. 
BB-HNP60 setting information file is saved in the 
destination folder. 
						

							Operating Instructions
73
2.13.3 Copying the Recorded Images
This software can copy the monitoring image to the clipboard.
1.Right-click the image on the monitoring page.
 The copy menu is displayed.
2.Click [Copy].
 This software copies the image to the clipboard.
Notes
 The clipboard is a place to temporarily save in copying or pasting 
data. The copied image can be used in the program such as Paint.
 You can copy the image by selecting [Edit] [Copy] on the menu bar.
2.13.4 Changing the Keyword of the Recorded Images
You can change the keyword set to the recorded images.
1.Select a camera preview on the camera list.
 Selected camera is displayed in a blue frame (see page 66).
2.Select an image to change the keyword on the recorded image page.
3.Select [Recorded Images] [Edit Keyword] on the menu bar.
 You can select [Edit Keyword] from the menu displayed by right-clicking 
recorded image.
 The keyword change window is displayed.
4.Change the keyword, and click [OK].
 The keyword is changed. 
						

							Operating Instructions
74
2.13.5 Deleting the Recorded Images
1.Select a camera preview on the camera list.
 Selected camera is displayed in a blue frame (see page 66).
2.Select the recorded images to delete on the recorded image page.
 You can select multiple images.
3.Select [Recorded Images] [Delete] on the menu bar.
 You can select [Delete] on the menu displayed by right-clicking the 
recorded image.
 The confirmation window is displayed.
4.Click [OK].
 The selected images are deleted.
Note
This software can delete 100 images at a time. If images to delete exceeds 
100, repeat the deletion. 
						

							Operating Instructions
75
2.14 Error Message List
Message Cause and Remedy
Basic Setting
Enter Camera Name.  The Camera Name space was blank.
Follow the instruction message.
Enter Camera Address.  The Camera Address space was blank.
Follow the instruction message.
Port should be between 1 and 
65535. A number not between 1 and 65535 was 
entered in the Port blank.
Follow the instruction message.
Camera Name should be 250 
characters or less. The Camera Name was more than 250 
characters.
Follow the instruction message.
Comment should be 128 
characters or less. The Comment was more than 128 characters.
Follow the instruction message.
Image Settings
Specify Recorded Frequency and 
Sound Recording cannot be 
selected simultaneously. Either set 
Recorded Frequency to [Not 
Specify] or set the recording 
settings to [Image Only]. Image settings are set to [Recorded 
Frequency Specify], and [Audio and Image] 
are selected simultaneously. Or if another tab 
or OK is pressed in this state.
Follow the instruction message.
Recording Capacity
Enter Recording Capacity.  The Recording Capacity space was blank.
Follow the instruction message.
Recording Capacity should be 
between 100 and 500000. A number not between 100 and 50000 was 
entered in the Recording Capacity blank.
Follow the instruction message. 
						

							Operating Instructions
76
Message Cause and Remedy
Keyword
Keyword 1 should be 40 
characters or less. Keyword 1 was more than 40 characters.
Follow the instruction message.
Keyword 2 should be 40 
characters or less. Keyword 2 was more than 40 characters.
Follow the instruction message. 
						

							Operating Instructions
77
Message Cause and Remedy
Parameter Error
An error has occurred in the 
XXXX parameter in Create New 
Camera (Camera Registration 
Information). Try again.
XXXX =
 Camera ID
 Camera Name
 Comment
 Camera Address
 Camera Address Port
User Name
Password
 Using Proxy
 Resolution
 Image Quality
 Recorded Frequency
 Audio Recording Settings
 Limit the Recording Capacity
 Recording Capacity
 Motion when Reaching the 
Recording Capacity
 Recording Flag before Motion 
Detection
 Number of Seconds before 
Motion Detection
 Recording Flag after Motion 
Detection
 Number of Seconds after 
Motion Detection
 Sensitivity
 Threshold
Keyword 1
Keyword 2
 Camera Type This is a software error.
If same error message appears after trying 
again, restart your PC. 
						

							Operating Instructions
78
Timer Setting
Message Cause and Remedy
Basic Setting
Enter Timer Name.  Timer Name space was blank.
Follow the instruction message.
Select a day of the week.  There is a check in the Day Specification 
Radio Button but no check in any of the Day 
Buttons.
One day or more must be selected.
Timer Name should be 24 
characters or less. Timer Name was more than 24 characters.
Follow the instruction message.
Keyword
Keyword 1 should be 40 
characters or less. Keyword 1 was more than 40 characters.
Follow the instruction message.
Keyword 2 should be 40 
characters or less. Keyword 2 was more than 40 characters.
Follow the instruction message. 
						

							Operating Instructions
79
Preferences
Message Cause and Remedy
Parameter Error
An error has occurred in the 
XXXX parameter in Create New 
Timer (Timer Registration 
Information). Try again.
XXXX =
 Camera ID
Timer ID
 Timer Name
 Daily/Weekly Setting
 Day of the Week
Start Time
End Time
 Recording Method
 Recording Flag before Motion 
Detection
 Number of Seconds before 
Motion Detection
 Recording Flag after Motion 
Detection
 Number of Seconds after 
Motion Detection
Keyword 1
Keyword 2 This is a software error.
Check that the correct information is 
inputted into each error heading.
Message Cause and Remedy
Destination
Enter Minimum Free Disk Space.  Hard Disk Capacity space was blank.
Follow the instruction message.
Minimum Free Disk Space 
should be between 100 and 
50000. A number not between 100 and 50000 was 
entered in the Hard Disk Capacity blank.
Follow the instruction message. 
						

							Operating Instructions
80
Minimum Free Disk Space 
should be less than the current 
free space (*** MB). The free space on the disk is larger than the 
free space on the drive.
Follow the instruction message.
Select Save Destination Folder.  Save Destination Folder Path space was 
blank.
Follow the instruction message.
Backup
Enter Minimum Free Disk Space.  Minimum Free Disk Space field was blank.
Follow the instruction message.
Minimum Free Disk Space 
should be between 100 and 
50000. A number not between 100 and 50000 was 
entered in the Minimum Free Disk Space 
blank.
Follow the instruction message.
Minimum Free Disk Space 
should be less than the current 
free space (XXX MB). The free space on the disk is larger than the 
free space on the drive.
Follow the instruction message.
Select Backup Folder.  The Backup Destination Folder Path space 
was blank.
Follow the instruction message.
Network
Enter Proxy Server Address.  [Use a proxy server] is checked and the 
Address space was blank.
Follow the instruction message.
Port should be between 1 and 
65535. A number not between 1 and 65535 was 
entered in the Port blank.
Follow the instruction message. Message Cause and Remedy