Panasonic Network Camera Recorder Operating Instructions
Have a look at the manual Panasonic Network Camera Recorder Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 26
Operating Instructions
26
2.2 Automatically Backing up Recorded Images
Recorded images can be backed up automatically at the specified time.
1.Select [Tools] [Preferences] [Backup] on the menu bar.
The backup setting page is displayed.
2.Set the parameters, and click [OK].
(a)
(b)
(c) Check the box.](http://img.usermanuals.tech/thumb/58/74651/w64_bb-hnp11_16CameraVersion_en_om_d-25.png "Page 26
Operating Instructions
26
2.2 Automatically Backing up Recorded Images
Recorded images can be backed up automatically at the specified time.
1.Select [Tools] [Preferences] [Backup] on the menu bar.
The backup setting page is displayed.
2.Set the parameters, and click [OK].
(a)
(b)
(c) Check the box.")
![Page 27
Operating Instructions
27
Parameters
Notes
Backup feature automatically creates the last dated folder, and copies the
recorded images and data for search in the destination folder.
Backup feature backs up only newly-recorded images after the last
backup was executed.
If the capacity has reached the limit, the backup is stopped, and error
message is displayed (see page 91).
The backup images can be searched. Select [Backup Image] on the
search page (see page 63).
The recording operation of...](http://img.usermanuals.tech/thumb/58/74651/w64_bb-hnp11_16CameraVersion_en_om_d-26.png "Page 27
Operating Instructions
27
Parameters
Notes
Backup feature automatically creates the last dated folder, and copies the
recorded images and data for search in the destination folder.
Backup feature backs up only newly-recorded images after the last
backup was executed.
If the capacity has reached the limit, the backup is stopped, and error
message is displayed (see page 91).
The backup images can be searched. Select [Backup Image] on the
search page (see page 63).
The recording operation of...")
![Page 28
Operating Instructions
28
2.3 Using a Proxy Server
You need to set the following settings to monitor the camera on the Internet you
using a proxy server. (You cannot connect to the camera without the proxy
settings.)
If you do not use a proxy server, this setting is not required.
1.Select [Tools] [Preferences] [Network Connection] on the menu bar.
The proxy setting page is displayed.
2.Check [Use a proxy server], set the parameters, and click [OK].](http://img.usermanuals.tech/thumb/58/74651/w64_bb-hnp11_16CameraVersion_en_om_d-27.png "Page 28
Operating Instructions
28
2.3 Using a Proxy Server
You need to set the following settings to monitor the camera on the Internet you
using a proxy server. (You cannot connect to the camera without the proxy
settings.)
If you do not use a proxy server, this setting is not required.
1.Select [Tools] [Preferences] [Network Connection] on the menu bar.
The proxy setting page is displayed.
2.Check [Use a proxy server], set the parameters, and click [OK].")
![Page 30
Operating Instructions
30
2.4 Registering the Camera
Before you can view or record images, each camera must be configured on this
software.
If you change the destination folder from the default folder of this software,
select a folder to save images in advance (see page 23).
The camera information can be imported and exported (see page 72).
2.4.1 Creating New Camera
1.Select [Camera] [Create New Camera] on the menu bar.
You can create a camera on the menu displayed by right-clicking on the...](http://img.usermanuals.tech/thumb/58/74651/w64_bb-hnp11_16CameraVersion_en_om_d-29.png "Page 30
Operating Instructions
30
2.4 Registering the Camera
Before you can view or record images, each camera must be configured on this
software.
If you change the destination folder from the default folder of this software,
select a folder to save images in advance (see page 23).
The camera information can be imported and exported (see page 72).
2.4.1 Creating New Camera
1.Select [Camera] [Create New Camera] on the menu bar.
You can create a camera on the menu displayed by right-clicking on the...")
![Page 33
Operating Instructions
33
Image Settings Page
Default is displayed when you register a camera.
If you can change default by checking [Set to Default] and clicking [OK], the
current settings become as a default.
If you click [Return to Default], the settings return to a default.
Note
If the camera disables setting changes, resolution or image quality settings
may not work properly. Setting Description
Resolution Select 640 x 480, 320 x 240 (default) or 160 x 120.
Image Quality Select Favor...](http://img.usermanuals.tech/thumb/58/74651/w64_bb-hnp11_16CameraVersion_en_om_d-32.png "Page 33
Operating Instructions
33
Image Settings Page
Default is displayed when you register a camera.
If you can change default by checking [Set to Default] and clicking [OK], the
current settings become as a default.
If you click [Return to Default], the settings return to a default.
Note
If the camera disables setting changes, resolution or image quality settings
may not work properly. Setting Description
Resolution Select 640 x 480, 320 x 240 (default) or 160 x 120.
Image Quality Select Favor...")
![Page 34
Operating Instructions
34
Recording Capacity Limit Page
Default is displayed when you register a camera.
If you change default by checking [Set to Default] and clicking [OK], the current
settings become as a default.
If you click [Return to Default], the settings return to a default.
If you change the capacity to a smaller value than the current capacity, this
software deletes old images. (E.g. if you change the capacity to 200 MB when
you recorded images up to 250 MB, 50 MB old images are...](http://img.usermanuals.tech/thumb/58/74651/w64_bb-hnp11_16CameraVersion_en_om_d-33.png "Page 34
Operating Instructions
34
Recording Capacity Limit Page
Default is displayed when you register a camera.
If you change default by checking [Set to Default] and clicking [OK], the current
settings become as a default.
If you click [Return to Default], the settings return to a default.
If you change the capacity to a smaller value than the current capacity, this
software deletes old images. (E.g. if you change the capacity to 200 MB when
you recorded images up to 250 MB, 50 MB old images are...")
![Page 35
Operating Instructions
35
Motion Detection Page
E.g. If the recording time overlaps other settings, a continuous image is recorded.
If you set to record images before or after 5-second period and another motion
is detected, 1 image is recorded.
Default is displayed when you register a camera.
If you can change default by checking [Set to Default] and clicking [OK], the
current settings become as a default.
If you click [Return to Default], the settings return to a default.Setting Description...](http://img.usermanuals.tech/thumb/58/74651/w64_bb-hnp11_16CameraVersion_en_om_d-34.png "Page 35
Operating Instructions
35
Motion Detection Page
E.g. If the recording time overlaps other settings, a continuous image is recorded.
If you set to record images before or after 5-second period and another motion
is detected, 1 image is recorded.
Default is displayed when you register a camera.
If you can change default by checking [Set to Default] and clicking [OK], the
current settings become as a default.
If you click [Return to Default], the settings return to a default.Setting Description...")
Operating Instructions 31 Basic Settings Page Setting Description Camera Name Enter the camera name (mandatory). The camera name is displayed on the screen (see page 45). Maximum 250 characters. Comment Enter the information of the camera such as a location. The comment is displayed on the screen (see page 45). Maximum 128 characters. Camera Address Enter the IP address (or domain name) (mandatory). Enter the alphanumeric characters. Port Enter the port number. When port number is 80 (default), you do not need to enter port number. Enter the numeric characters.
Operating Instructions 32 Note If this software cannot access the camera, the following message is displayed. Confirm the camera setting and try again. Note The number of connections from software to the camera is limited. Up to 3 connections can be established with the camera. User Name/ PasswordIf you set security setting (authentication setting), enter administrator user name and password of the camera. Enter the alphanumeric characters. 4 to 15 characters. Password is saved in encryption. Use a proxy server If you enable the proxy settings (see page 28), [Use a proxy server] is enabled. If the camera is using a proxy server, check [Use a proxy server]. Setting Description
Operating Instructions 33 Image Settings Page Default is displayed when you register a camera. If you can change default by checking [Set to Default] and clicking [OK], the current settings become as a default. If you click [Return to Default], the settings return to a default. Note If the camera disables setting changes, resolution or image quality settings may not work properly. Setting Description Resolution Select 640 x 480, 320 x 240 (default) or 160 x 120. Image Quality Select Favor Clarity, Standard (default) or Favor Motion. Recorded FrequencySet the interval to record images. [Not Specify *1, Specify*2 or Setting Intervals*3] *1If you record images as they are set on the camera, set to [Not Specify]. Images are recorded as the camera sends images through its max. bandwidth. *2If you select [Audio and Image], you cannot specify the intervals.*3Due to the network environment, you may not monitor the camera at the set intervals or max. bandwidth. Recording Setting Select to record the image with audio or only images.
Operating Instructions 34 Recording Capacity Limit Page Default is displayed when you register a camera. If you change default by checking [Set to Default] and clicking [OK], the current settings become as a default. If you click [Return to Default], the settings return to a default. If you change the capacity to a smaller value than the current capacity, this software deletes old images. (E.g. if you change the capacity to 200 MB when you recorded images up to 250 MB, 50 MB old images are deleted.) Setting Description Limit Recording CapacityTo limit the capacity, check [Limit the recording capacity] and set the capacity. Select [Stop recording] or [Delete old images and keep recording] (by 1 minute) when the capacity is full.
Operating Instructions 35 Motion Detection Page E.g. If the recording time overlaps other settings, a continuous image is recorded. If you set to record images before or after 5-second period and another motion is detected, 1 image is recorded. Default is displayed when you register a camera. If you can change default by checking [Set to Default] and clicking [OK], the current settings become as a default. If you click [Return to Default], the settings return to a default.Setting Description Recording Method Record images in the time period before or after motion detection. Threshold Adjust the threshold to start recording. If the threshold is set low, this software sensitively detects changes. Sensitivity If you set sensitivity high, amplitude of motion detection bar gets jumpy (see page 45). 5 seconds5 seconds 5 seconds5 seconds Motion is detected. Motion is detected.
Operating Instructions 36 Notes Clicking on the toolbar buttons starts recording, and clicking stops recording. If you are clicking or while you set recording time period before or after the motion detection, motion detection recording does not work. If you try to capture a exact image when the motion is detected, do not check the boxes of before motion detection and after motion detection. Motion detection level is changed depending on resolution, image quality, object situation and network environment. Confirm the level by performing motion detection recording. On the monitoring page, clicking displays motion detection bar. Motion Detection Bar The threshold is the border between green and red. If the level exceeds the threshold, the motion detection recording starts. Indicator lights red during motion detection recording.
Operating Instructions 37 Keyword Page Setting Description Keyword 1/ Keyword 2Put a keyword to manually-recorded images. 2 keywords (keyword 1/keyword 2) can be set. If you set a keyword, you can search recorded images by it (see page 63).
Operating Instructions 38 2.4.2 Editing Camera Information 1.Select [Camera] [Edit Current Camera] on the menu bar. You can change camera information on the menu displayed by right- clicking on the camera list (see page 66). The change camera information page is displayed. 2.Set the parameters and click [OK]. See page 31 to page 37 for details about parameters.
Operating Instructions 39 2.5 Network Camera Recorder Window Window Display The camera list and operation bar can be displayed on another window, or change the layout. E.g. Displaying the operation bar on another window Page Selection tab Monitoring Image: Displays the current image (see page 45). Recorded Image: Displays the recorded image list and playback image (see page 46). Timer List: Displays the timer list (see page 47). Camera List (see page 66)Menu Bar (see page 42) Toolbar Buttons (see page 44) Operation Bar (see page 49) Status Bar Monitoring Page (see page 45) Displays the status. Double-clicking or clicking displays it on another window.
Operating Instructions 40 E.g. Changing the layout moving the operation bar Note If you move the window while pressing [Ctrl] on the keyboard, the window is located as an independent window. You can move the location by dragging. The window is embedded by dragging on the page.