Panasonic Pedestal For Wide Plasma Display TY-ST08-K, TY-ST08-S Installation Instructions

Pedestal for Wide Plasma Display
Installation Instructions
Before attempting to assemble these accessories, please read these
instructions completely.
Please retain this book for future reference.
Sockel für Plasmadisplay
Installationsanleitung
Vor der Installation lesen Sie bitte diese Anleitung sorgfältig durch.
Diese Anleitung zum späteren Nachschlagen aufbewahren.
Vloerstandaard voor Breedbeeld 
Plasmadisplay Monitor
InstallatiehandleidingLees deze handleiding zorgvuldig door alvorens u probeert...

22 

3
.... .... 
............... 
.... 
...............  

4 

5
........................................... 

6
English
6 6Precautions with regard to setting up
WARNING
Installation work should only be carried out by a qualified technician.
• 
If the pedestal is not installed correctly, the Wide Plasma Display may fall over and personal injury may result.
CAUTION
Do not use any displays other than those given in the catalogue.
Do not climb up onto the pedestal or use it as a step. (Young children should be made
particularly aware of this caution.)
• If the unit falls over or becomes damaged through misuse,...

7
English
Attach the poles
Parts for assembly
Short screws .... 4Long screws .... 4
Poles ............... 2
Binding strap .... 1
Pedestal ............... 1
Base
Pedestal
Pole
Pole
Stamped mark
Stamped markAlign the stamped marks.
Align the stamped marks.
Short screws
Short screws
Short screws
Short screws
For 42-inch/50-inch
For 37-inch
Securely attach both left and right poles to the top face of the base as shown below using short screws        .
Pedestal 

English
8
Attach to the display console
1. Attach the connection cables to the display.
Rear View
2. Insert the poles into the holes
in the display console.3. Fasten with screws
* Place clean blankets or similar
on a level floor or table,and place
the display on top of them facing down.
( Rear of display)
Blankets, soft
cloths or similar.
Display console
Cable Binding Instructions
Bind all cables to the PDP base with the supplied binding strap.
While ensuring there is sufficient slack in the cord to...

9
English
Tip-prevention parts
Black screws
...................2Wood screws
...................2Bands.........2
screws.........2
screws
With separately installed speakers
Speaker
attachment screws Clamps
Clamps
screws Bands
Band Front face
PreparationWithout separately installed speakers
Clamps
Black screws
Fastening
method Wood
screws
Wood
screws
Locate the wood screw at the
center of the material width.Clamps........4
Secure the console to prevent tipping
1. Attaching to a TV stand
2. Attaching to a...

Deutsch
10 10
Vorsichtsmaßnahmen für die Aufstellung
WARNUNG
Die Installation darf nur von einem qualifizierten Fachmann ausgeführt werden.
• Falls der Sockel nicht richting installiert ist, kann das Plasmadisplay umfallen und dabei
Verletzungen verursachen.
VORSICHT 
Nicht für Displays verwenden, die nicht in diesem Katalog aufgeführt sind. 
Nicht auf den Sockel klettern oder den Sockel als Tritt verwenden. (Dies gilt besonders für
kleine Kinder.)
• 
Beim Umfallen kann das Gerät beschädigt werden und es...