Panasonic Projector Pt Lz370u Operating Instructions

							[NETWORK] menu
ENGLISH - 81
Settings
Network settings of computer
Configure the network settings (wired LAN) of the computer.
1) Turn on the power of your computer.
2) 
Follow the network administrator
 ’s instructions to configure the network settings.
▶zIf the projector is in the default settings ( page 78), make the following network settings on your computer.
IP address
192.168.10.100
Subnet mask 255.255.255.0
Default gateway 192.168.10.1
Accessing from the Web browser
1) Start up the Web browser on the computer.
2)  
Enter the IP
  address set on the projector into the URL entry field of the Web browser.
3)
 
Enter the user name and the password.
▶z The factory default setting of the user name is user1 (user rights)/admin1 (administrator rights) and the 
password is panasonic (lower case).
4) Click OK.
▶zThe [Projector status] page is displayed. 
						

							[NETWORK] menu
82 - ENGLISH
Settings
Note
 zIf you control the projector using a W

eb browser, set [NETWORK CONTROL] (
 page 79) to [ON].
 zD

o not perform setting or control simultaneously by starting up multiple Web browsers. Do not set or control the 
projector from multiple computers.
 z Change the password first. ( page 93)
 zThe administrator rights allows to use all functions. 

The user rights allows to display only the following buttons 
on the screen and use those functions: [Projector status] (
 page 83), [Network status] ( page 85), [Basic 
control] (
 page 85), [Advanced control] ( page 86), and [Change password] ( page 93).
 z Access will be locked for few minutes when an incorrect password is entered three times consecutively
.
▶■Descriptions of items
(1)
(2)
(3)
(4)
(5)
(6)
(1) Page tab
Switches pages by clicking it.
(2) [Status] The status of the projector is displayed by clicking this item.
(3) [Projector control] The [Projector control] page is displayed by clicking this 
item.
(4) [Detailed set up] The [Detailed set up] page is displayed by clicking this item.
(5) [Change password] The [Change password] page is displayed by clicking this 
item.
(6) [CRESTRON RoomView] The RoomView operation page is displayed by clicking this 
item. 
						

							[NETWORK] menu
ENGLISH - 83
Settings
▶■[Projector status] page
Click [Status] 
→ [Projector status].
Displays the status of the projector for the following items.
(10)
(11)
(12)
(13)
(14) (5)
(6)
(7)
(8)
(9)
(1)
(2)
(3)
(4)
(1) [PROJECTOR TYPE]
Displays the type of the projector.
(2) [MAIN VERSION] Displays the firmware version of the projector.
(3) [POWER] Displays the power status.
(4) [PICTURE MODE] Displays the status of the picture mode.
(5) [SERIAL NUMBER] Displays the serial number of the projector.
(6) [NETWORK VERSION] Displays the firmware version of the network.
(7) [AV MUTE] Displays the status of the AV mute.
(8) [VOLUME] Displays the status of the volume.
(9) [INPUT] Displays the selected video input.
(10) [INTAKE AIR TEMPERATURE] Displays the status of the intake air temperature of 
the projector.
(11) [EXHAUST AIR TEMPERATURE] Displays the status of the exhaust air temperature of 
the projector.
(12) [LAMP RUNTIME] Displays the lamp usage time (converted value).
(13) [SELF TEST] Displays the self-diagnosis information.
(14) [PROJECTOR RUNTIME] Displays the operation times of the projector. 
						

							[NETWORK] menu
84 - ENGLISH
Settings
▶■Error information page
When [Error (Detail)] is displayed on the [Projector status] screen, click it to display the error details.
▶z
The projector may go into the standby status to protect the projector depending on the contents of the 
error

.
[OK]: Normal opera\Ation
[FA\fLED]: O\b\burren\be of \Atrouble
[WARN\fNG]: Warning
▶zDescription of problem occurrence [F AILED]:
Item
Description
[MAIN CPU BUS] There is a problem with the microcomputer circuitry. Consult your 
dealer.
[FAN] There is a problem with the fan or the fan drive circuit. Consult your 
dealer.
[INTAKE AIR TEMPERATURE] The intake air temperature is too high. It may be used in an operating 
environment where the temperature is high, such as near a heating 
appliance, the intake port may be blocked, or the air filter may be 
clogged.
[EXHAUST AIR TEMPERATURE] The exhaust air temperature is too high. The air exhaust port may be 
blocked, or the mode setting for using the projector at high elevations 
may be wrong.
[LAMP REMAIN TIME] The lamp usage time has exceeded the specified time, and it is time 
to replace the lamp.
[LAMP STATUS] The lamp has failed to turn on. Wait a while until the luminous lamp 
cools off, and then turn on the power.
[APERTURE(CONTRAST-SHUTTER)] There is a problem with the contrast shutter circuitry. Consult your 
dealer.
[INTAKE AIR TEMP.SENSOR] There is a problem with the sensor used to detect intake air 
temperature. Consult your dealer.
[EXHAUST AIR TEMP.SENSOR] There is a problem with the sensor used to detect exhaust air 
temperature. Consult your dealer.
[BATTERY] The battery replacement is required. Consult your dealer.
[AIR FILTER] There is too much dust accumulated in the air filter unit.
Turn the  switch to  (
 page 38), and clean 
the air filter (
 page 99). 
						

							[NETWORK] menu
ENGLISH - 85
Settings
▶■[Network status] page
Click [Status] 
→ [Network status].
The current network setting status is displayed.
▶■ [Basic control] page
Click [Projector control] 
→ [Basic control].
(1)
(6)
(2)
(4)
(5)
(3)
(1) [INPUT]
Switches the input mode.
(2) [VOLUME] Adjusts the volume
(3) [PICTURE MODE] Switches the picture mode.
(4) [AV MUTE] Switches between on and off of the AV mute.
(5) [POWER] Switches between off and on of the power.
(6) [CLOSED CAPTION] Switches the setting for the closed caption. 
						

							[NETWORK] menu
86 - ENGLISH
Settings
▶■[Advanced control] page
Click [Projector control] 
→ [Advanced control].
(1)
(2)
(1) [POSITION]
Operates items regarding angle of view.
(2) [PICTURE] Operates items regarding picture quality.
▶■[Network config] page
Click [Detailed set up] 
→ [Network config].
▶z
The [CAUTION!] screen is displayed by clicking [Network config].
▶zThe current settings are displayed by clicking the [Next] button.
▶zThe following setting change screen is displayed by clicking the [Change] button.
(1)
(2)(3)(4)(5)(6)
(7)
(1) [DHCP ON]/[DHCP OFF]
To enable the DHCP client function, set to [DHCP ON].
(2) [IP ADDRESS] Enter the IP address when not using a DHCP server.
(3) [SUBNET MASK] Enter the subnet mask when not using a DHCP server.
(4) [DEFAULT GATEWAY] Enter the gateway address when not using a DHCP server.
(5) [DNS1] Allowed characters for the entry of DNS 1 server address 
(primary):
Numbers (0 to 9), period (.)
(Example: 192.168.0.253)
(6) [DNS2] Allowed characters for the entry of DNS 2 server address 
(secondary):
Numbers (0 to 9), period (.)
(Example: 192.168.0.254)
(7) [Back]/[Next] Click the [Back] button to return to the original screen. The 
current settings are displayed by pressing the [Next] button. 
Click the [Submit] button to update the settings.
Note
 zWhen you use the “Back” and “Forward” functions of your browser

, a warning message “Page has Expired” 
may appear. In that case, click [Network config] again since the following operation will not be guaranteed. 
						

							[NETWORK] menu
ENGLISH - 87
Settings
▶■[Adjust clock] page
Click [Detailed set up] 
→ [Adjust clock].
(1)
(2)
(3)
(4)(5)(6)
(7)
(1) [Time Zone]
Selects the time zone. (Factory default: GMT +09:00)
(2) [Set time zone] Updates the time zone setting.
(3) [NTP SYNCHRONIZATION] Set to [ON] to adjust the date and time automatically.
(4) [NTP SERVER NAME] Enter the IP address or server name of the NTP server 
when you set to adjust the date and time manually.
(To enter the server name, the setup of the DNS server is 
required.)
(5) [Date] Enter the date to be changed.
(6) [Time] Enter the time to be changed.
(7) [Set date and time] Updates the date and time settings.
Note
 zThe replacement of the battery inside the projector is required when the time goes out of alignment right after 
correcting the time. Consult your dealer

. 
						

							[NETWORK] menu
88 - ENGLISH
Settings
▶■[Ping test] page
You can check whether the network is connected to the E-mail server, POP server, DNS server, etc.
Click [Detailed set up] 
→ [Ping test].
(1)
(2)
(3)
(4)
(1) [Input IP address]
Enter the IP address of the server to be tested.
(2) [Submit] Executes the connection test.
(3) Example of display when the connection has succeeded
(4) Example of display when the connection has failed
▶■ [ECO management set up] page
You can configure the settings regarding ECO management.
You can also configure the settings with [PROJECTOR SETUP] 
→ [LAMP POWER], [PROJECTOR SETUP] 
→  [ECO MANAGEMENT] 
→ [AUTO POWER SAVE], [PROJECTOR SETUP] 
→ [ECO MANAGEMENT] 
→ [NO 
SIGNAL SHUT-OFF] of the projector.
Click [Detailed set up]  → [ECO management set up].
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(1) [LAMP POWER]
Displays the setting of the lamp power.
(2) [AUTO POWER SAVE] Selects the auto power save function.
(3) [AMBIENT LIGHT DETECTION] Selects the setting of ambient light detection.
(4) [SIGNAL DETECTION] Selects the setting of signal detection.
(5) [AV MUTE DETECTION] Selects the setting of AV mute detection.
(6) [NO SIGNAL SHUT-OFF] Selects the setting of No signal shut-off function.
(7) [Submit] Update the settings. 
						

							[NETWORK] menu
ENGLISH - 89
Settings
▶■[E-mail set up] page
An E-mail message can be sent to the E-mail address setup in advance (up to two addresses) when the 
problem occurred or the lamp usage time reached the specified value.
Click [Detailed set up] 
→ [E-mail set up].
(1)
(2)
(3)
(4)
(5)
(6)
(1) [ENABLE]
Select [ENABLE] when using the E-mail function.
(2) [SMTP SERVER NAME] Enter the IP address or the server name of the E-mail 
server (SMTP). To enter the server name, the setup of the 
DNS server is required.
(3) [MAIL FROM] Enter the E-mail address of the projector. (Up to 63 
characters in single byte)
(4) [MEMO] You can enter information such as the location of the 
projector that notifies the sender of the E-mail. (Up to 63 
characters in single byte)
(5) [MINIMUM TIME] Change the minimum intervals for the temperature warning 
mail. The default value is 60 minutes. In this case, another 
E-mail will not be sent for 60 minutes after sending the 
temperature warning mail even if it reaches the warning 
temperature.
(6) [INTAKE AIR TEMPERATURE] Change the temperature setting for the temperature 
warning mail. A temperature warning mail is sent when the 
temperature exceeds this value.
(2)
(1)
(1) [E-MAIL ADDRESS 1]Enter the E-mail address to be sent.
(2) Settings of the conditions to send E-mail Select the conditions to send E-mail.
[MAIL CONTENTS]:  Select either [NORMAL] or [SIMPLE].
[ERROR]:  An E-mail message is sent when an error occurred in 
the self-diagnosis.
[LAMP RUNTIME]:  An E-mail message is sent when the remaining lamp 
usage time has reached the value set at the right field.
[INTAKE AIR TEMPERATURE]:  An E-mail message is sent when the intake air 
temperature has reached the value set at the above 
field.
[PERIODIC REPORT]:  Place a check mark on this when E-mail is to be sent 
periodically.
It will be sent on the days and time with the check mark. 
						

							[NETWORK] menu
90 - ENGLISH
Settings
▶■[E-mail set up] page (continued)
(1)
(2)
(3)
(1) [E-MAIL ADDRESS 2]
Enter the E-mail address to be sent when two E-mail 
addresses are to be used.
Leave it blank when two E-mail addresses are not to be 
used.
(2) Settings of the conditions to send E-mail Select the conditions to send E-mail to the second E-mail 
address.
[MAIL CONTENTS]:  Select either [NORMAL] or [SIMPLE].
[ERROR]:  An E-mail message is sent when an error occurred in 
the self-diagnosis.
[LAMP RUNTIME]:  An E-mail message is sent when the remaining lamp 
usage time has reached the value set at the right field.
[INTAKE AIR TEMPERATURE]:  An E-mail message is sent when the intake air 
temperature has reached the value set at the above 
field.
[PERIODIC REPORT]:  Place a check mark on this when E-mail is to be sent 
periodically to the second E-mail address. It will be sent 
on the days and time with the check mark.
(3) [Submit] Update the settings.