Panasonic Software DP-130/150/1810/2000/2010/2500/3000 Operating Instructions

							Document Viewer
111
Page Menu
Document Management 
System Section
NOTE1. Grayscale and color information of a grayscale or RGB color image is lost upon conversion into
a monochrome image. The lost information is not restorable.
2. Color information of a RGB color image is lost upon conversion into a grayscale image. The
lost information is not restorable. Add Page
Adds new pages to documents.
Insert Page
Inserts a page at the current position.
Replace Page
Replace the current page with a new one.
Rotate Page
-Rotate Right
Rotate the page 90 degrees clockwise.
-Rotate 180 Degrees
Rotate the page 180 degrees
-Rotate Left
Rotate the page 90 degrees counterclockwise.
Adjust Page
-Correct Skew
Adjusting orientation.
-Eliminate Noise
Eliminate the noise.
-Enhance Edge
Enhances the edge.
-Brightness/Contrast
Adjusts brightness or contrast.
-Hue/Chroma
Adjusts hue or chroma.
-Reverse Gradation
Reverse Gradation.
-Monochrome
Convert to Monochrome.
-Grayscale
Converting to Grayscale.
-RGB
Converting to RGB full color. 
						

							Document Viewer
112
Page Menu
Copy Page to Clipboard
Copy the entire page selected onto the clipboard.
Copy Select Area
Copy Select Area To Clipboard
Select All Pages
Select All Pages. 
						

							Document Viewer
113
Document Management 
System Section
Annotation Menu
Show Annotation
The check box on/off setting specifies whether to display an
annotation in the page list thumbnail.
Set Annotation
Protect the annotation from re-editing.
Annotation Order
-Change Order To Top
-Change Order To Last
-Change Order To Previous
-Change Order To Next
Te x t
Creates a text annotation and paste it to a page.
Line
Creates a line annotation and paste it to a page.
Rectangle
Creates a rectangular annotation and paste it to a page.
Ellipse
Creates an ellipse annotation and paste it to a page.
White Block
Creates a white rectangular (solidly white-painted rectangle)
annotation and paste it to a page.
Black Block
Creates a black rectangular (solidly black-painted rectangle)
annotation and paste it to a page.
Marker
Create a marker annotation and paste it to a page.
Label
Creates a label annotation and paste it to a page.
Stamp
Creates a stamp annotation and paste it to a page.
Date
Creates a date annotation and paste it to a page.
Page No.
Creates a page number annotation and paste it to a page. 
						

							Document Viewer
114
Annotation Menu
NOTE1. For specifying text font and colors, select the drawn text and select Properties in the
Annotation menu  (See page 113). The Text Format Setup dialog box can be displayed also
by selecting Properties in the pop-up menu, that appears by right-clicking on a drawn text.
2. For specifying the thickness and color of a line, select a drawn line and then select Properties
in the Annotation menu  (See page 113). Graphics Format Setup dialog box can be displayed
also by selecting Properties in the pop-up menu, that appears by right-clicking on a drawn
line. Header
Edits a header common to each page.
Footer
Edits a footer common to each page.
Edit Text
Sets a format of a text in a selected annotation.
Properties
Display Properties for annotation. 
						

							Document Viewer
115
Annotation Menu
Document Management 
System Section
Te x t
Creates a text annotation. Select text annotation in annotation
menu (or tool button), and drag the mouse in the image
window to specify the display position.
A dialog box for text setup will appear.
Enter the text to display, and then specify text color and font.
Line
Creates a line annotation.
Select line annotation in the annotation menu (or tool button),
and drag the mouse in the image window to draw lines.
Rectangle
Creates a rectangle annotation.
Select rectangle annotation in the annotation menu (or tool
button), and drag the mouse in the image window to draw a
rectangle. 
						

							Document Viewer
116
Annotation Menu
NOTE1. For specifying the thickness and colors of the rectangle, select the drawn rectangle and select
Properties in the Annotation menu  (See page 113). The Graphic Format Setup dialog box
can be displayed also by selecting Properties in the pop-up menu, that appears by right-
clicking on a drawn figure.
2. For specifying the thickness and colors of the ellipse, select the drawn ellipse and select
Properties in the Annotation menu  (See page 113). The Graphic Format Setup dialog box
can be displayed also by selecting Properties in the pop-up menu, that appears by right-
clicking on a drawn figure. Ellipse
Creates an ellipse annotation.
Select the ellipse annotation in the annotation menu (or tool
button), and drag the mouse in the image window to draw an
ellipse. 
						

							Document Viewer
117
Annotation Menu
Document Management 
System Section
NOTE1. For specifying lines and colors of solid white, select the drawn solid white rectangle and select
Properties in the Annotation menu  (See page 113). The Graphic Format Setup dialog box
can be displayed also by selecting Properties in the pop-up menu, that appears by right-
clicking on a drawn figure.
2. For specifying lines and colors of solid black, select the drawn solid black rectangle and select
Properties in Annotation menu  (See page 113). The Graphic Format Setup dialog box can
be displayed also by selecting Properties in the pop-up menu, that appears by right-clicking
on a drawn figure. White Block
Creates a white rectangle (solidly white-painted rectangle)
annotation.
Select the white annotation in the annotation menu (or tool
button), and drag the mouse in the image window to draw a
white rectangle.
Black Block
Creates a black rectangle (solidly black-painted rectangle)
annotation.
Select the black annotation in the annotation menu (or tool
button), and drag the mouse in the image window to draw a
black rectangle. 
						

							Document Viewer
118
Annotation Menu
NOTE1. For specifying the color of a marker, select the drawn marker and select Properties in the
Annotation menu  (See page 113). The Graphic Format Setup dialog box can be displayed
also by selecting Properties in the pop-up menu, that appears by right-clicking
2. For specifying the color and font of a label, select the drawn label and select Properties in the
Annotation menu  (See page 113). The Graphic Format Setup dialog box can be displayed
also by selecting Properties in the pop-up menu, that appears by right-clicking on a drawn
label. Marker
Creates a marker annotation.
Select the marker annotation in the annotation menu (or tool
button), and drag the mouse in the image window to draw a
marker.
Label
Creates a label annotation.
Select the label annotation in the annotation menu (or tool
button), and drag the mouse in the image window to draw
label displays Text Format Setup dialog box.
Enter texts to display and specify text color and font. 
						

							Document Viewer
119
Annotation Menu
Document Management 
System Section
Stamp
Creates a stamp annotation.
The stamp annotation pastes another image file like a stamp.
Select the stamp annotation in the annotation menu (or tool
button) and click the   button. Then drag the
mouse in the image window to specify the area, displaying the
stamp dialog box.
Click the   button to specify an image from a file.
Clicking the   button allows selecting image files to
be used as a stamp.
OK
Browse
Add 
						

							Document Viewer
120
Annotation Menu
NOTE1. For specifying the color or font of the date, select the drawn date and select Properties in the
Annotation menu  (See page 113). The Text Format Setup dialog box can be displayed also
by selecting Properties in the pop-up menu, that appears by right-clicking on a drawn figure. Date
Creates a date annotation.
Select the date annotation in the annotation menu (or tool
button), and drag the mouse in the image window to specify
the area, displaying the Properties dialog box.
Specify the format, color, and font of the date to be displayed.
1.Font Name
Specify the font here.
2.Style
Specify the font style.
3.Size
Specify the font size.
4.Text Color
Select the text color here.
5.Date
Specify the date here. Selecting from the calendar or
entering the date is selectable for data entry.
6.Format
Specify the display format here.
7.Text Align
Specify the text alignment.