Panasonic Software Dp 130p Operating Instructions

Configuring the Printer Driver Settings
61
Windows 2000/XP (Administrator)
Printer Section
Device Settings Tab
1. button
Select the method of expressing device halftone (printer-specific halftone). Select the settings according
to printing data and preference.
Halftone Pattern
Select the pixel size to be used for halftones.
The greater the value, the coarser the image would become. However, a larger value is suited to printing
in large areas.
The Enhanced pattern allows printing at a higher resolution...

Configuring the Printer Driver Settings
62
Windows 2000/XP (Administrator)
2.Duplex Unit (For DP-2000/2500)
Check this checkbox if the Automatic Duplex Unit (DA-MD200) is installed.
Duplex printing function is enabled.
3.Output Tray (For DP-2000/2500/3000)
If Exit Tray (Inner) and Dual-Path Exit Guide Unit (DA-XN200/FK200) are installed, select inner option.
This allows specifying Inner 1 and Inner 2 as output bins for printer output.
If 1-Bin Finisher or Exit Tray (Outer) (DA-FS200/XT200) is installed,...

Configuring the Printer Driver Settings
63
Printer Section
To change the printer settings, open the dialog box for the printer properties by the following steps.
NOTE1. In Windows 2000/XP, setting the properties depends on the log-in accounts. This section
describes properties to be specified by a user, upon executing a print operation on an
application. See Settings Printer Driver on Windows 2000/XP (Administrator) for details of
administrator (system manager) properties.  (See page 54)
Windows 2000/XP...

Configuring the Printer Driver Settings
64
Windows 2000/XP (User)
General Tab
1.Select Printer
Select a printer for printing.
2.Page Range
Select a page range for printing.
3.Number of Copies (1-99)
Specify the number of copies.
4.Collate
Upon printing two or more copies, pages are output for each copy. 

Configuring the Printer Driver Settings
65
Windows 2000/XP (User)
Printer Section
Layout Tab
1.Orientation
Select the print orientation (Portrait/Landscape).
2.Print on Both Sides (Duplex) (For DP-150FX/2000/2010E/2500/3000)
Select duplex printing for printing on both sides.
Select the binding side (None/Flip on Short Edge/Flip on Long Edge) for duplex printing.
Note 1) Duplex Printing on post card is not allowed.
2) Duplex Printing is allowed only when the Dual-Path Exit Guide Unit, Paper Transport Unit...

Configuring the Printer Driver Settings
66
Windows 2000/XP (User)
Paper/Quality Tab
1.Paper Source
Specify where the paper you want to use is located in the machine. If you choose Auto Selection, the
printer driver will automatically select an appropriate tray according to the Paper Size.
2. button
Specify detailed settings. Refer to Advanced (See page 67) for details.
Advanced... 

Configuring the Printer Driver Settings
67
Windows 2000/XP (User)
Printer Section
Advanced
1.Paper Size
Select a document size.
2.Resolution
Select the printer resolution (300dpi/600dpi).
3.Scaling
Specify custom zoom when printing a document by zooming in/out at a desired rate. If the zooming rate is
specifiable in an application, specify 100% (same size) here. Specify a zooming rate in the print dialog
box of the application.
4.Metafile Spooling
With Metafile Spooling enabled, the file is spooled in...

Configuring the Printer Driver Settings
68
Windows 2000/XP (User)
7.Staple (For DP-2000/2500/3000)
Specifying staple printing is allowed if the output bin is set to outer.
Note 1) Staple printing is allowed only with Electronic Sorting Board (DA-ES200 : For DP-2000 only) and
1-Bin Finisher (DA-FS200) mounted.
2) Paper is stapled at the top left or at the top right. (See table below.)
Document orientation Paper orientation  Stapling position
Letter
A4
Letter
A4Letter
A4
Top left
Letter/A4
Letter
A4
Top...

Configuring the Printer Driver Settings
69
Windows 2000/XP (User)
Printer Section
8.Output Tray (For DP-2000/2500/3000)
Specify the output destination. 
Note 1) Output Tray selection is allowed only with Dual-Path Exit Guide Unit, Paper Transport Unit, Exit
Tray (Outer) or 1-Bin Finisher (DA-FK200/FK210/XT200/FS200) is installed.
2) Post cards cannot be output from the outer tray.
9.Security Print
Select to enable Security Print.
10.Halftone Color Adjustment
Contrast
Adjust the contrast of print...

70
Setting Print Conditions: Setting on the Device
Q 
Q Q  Q DP-1510P/1810P
Q 
Q Q  Q DP-1810F
Q 
Q Q  Q DP-2010E
Setting mode Settings Preset value number
LTR/A4 TRAY SEL. Set the printer paper priority orientation.
1: Portrait 2: LandscapePortrait

Function Settings Reset Key

Function Settings Reset Key

Function Settings Reset Key
4 LTR/A4 TRAY SEL. 
 1:PORTRAIT 2:L-SCAPE  
Press the PRINTER key.
Press the FUNCTION key.
Press 4 and the SET key.
Select the desired output paper orientation
After...