Home
>
Panasonic
>
Music Mixer
>
Panasonic Upgrade Utility For Audio Mixer WR-DA7 Version 2.0 Users Guide
Panasonic Upgrade Utility For Audio Mixer WR-DA7 Version 2.0 Users Guide
Have a look at the manual Panasonic Upgrade Utility For Audio Mixer WR-DA7 Version 2.0 Users Guide online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 56
3-14
16. New feature implements an Input to Output Routing Window
Previous Version: Not implemented
Version 2.0: This is a New Window. The [ROUTING] in [GROUP] window
group is used for selecting the routing of the Inputs and Aux Returns to Bus,
Master LR, and Surround Enable/Disable.
If the Input or Aux Return channel is selected to Stereo, then the Center Line
between the Odd and Even channels will disappear. (e.g. at above graphics,
INPUT 3 and 4.)
If the Bus channel is selected to Stereo, then the...](http://img.usermanuals.tech/thumb/58/62071/w64_da-7_en_v2_Utility_Users_om_d-55.png "Page 56
3-14
16. New feature implements an Input to Output Routing Window
Previous Version: Not implemented
Version 2.0: This is a New Window. The [ROUTING] in [GROUP] window
group is used for selecting the routing of the Inputs and Aux Returns to Bus,
Master LR, and Surround Enable/Disable.
If the Input or Aux Return channel is selected to Stereo, then the Center Line
between the Odd and Even channels will disappear. (e.g. at above graphics,
INPUT 3 and 4.)
If the Bus channel is selected to Stereo, then the...")
![Page 58
19. New feature allows separate IN and OUT X-FADE times of scene
memories
Previous Versions: The FADER IN and OUT times were set to the same
settings.
Version 2.0: The FADER IN and OUT times are Independent and can be
adjusted using the Two soft-knobs in the [SCENE MEMORY>XFADE] window.
20. New feature allows VTR control with RS-422 9-pin protocol
Previous Versions: Only MMC (MIDI Machine Control) was available.
Version 2.0: Now either MMC or VTR control can be selected.
1. Connect a VTR to the...](http://img.usermanuals.tech/thumb/58/62071/w64_da-7_en_v2_Utility_Users_om_d-57.png "Page 58
19. New feature allows separate IN and OUT X-FADE times of scene
memories
Previous Versions: The FADER IN and OUT times were set to the same
settings.
Version 2.0: The FADER IN and OUT times are Independent and can be
adjusted using the Two soft-knobs in the [SCENE MEMORY>XFADE] window.
20. New feature allows VTR control with RS-422 9-pin protocol
Previous Versions: Only MMC (MIDI Machine Control) was available.
Version 2.0: Now either MMC or VTR control can be selected.
1. Connect a VTR to the...")
![Page 59
When the RS-422 9PIN PROTOCOL area is ON:
* The REPLAY and LOOP buttons will not function.
* The Communication speed must be set to 38.4 KBPS.
When the RS-422 9PIN PROTOCOL area is OFF, MMC will be the default.
21. New shortcut for switching the built-in oscillator on / off
To switch the internal oscillator [ON] or [OFF] press the UTILITY button
while holding down the MMC button on the DA7’s Top Panel.
22. New shortcut to switch the built-in SOLO-MUTE on / off
To switch the SOLO-MUTE [ON] or [OFF] press...](http://img.usermanuals.tech/thumb/58/62071/w64_da-7_en_v2_Utility_Users_om_d-58.png "Page 59
When the RS-422 9PIN PROTOCOL area is ON:
* The REPLAY and LOOP buttons will not function.
* The Communication speed must be set to 38.4 KBPS.
When the RS-422 9PIN PROTOCOL area is OFF, MMC will be the default.
21. New shortcut for switching the built-in oscillator on / off
To switch the internal oscillator [ON] or [OFF] press the UTILITY button
while holding down the MMC button on the DA7’s Top Panel.
22. New shortcut to switch the built-in SOLO-MUTE on / off
To switch the SOLO-MUTE [ON] or [OFF] press...")
![Page 60
23. New Threshold level adjustment of analog input PEAK/SIGNAL LEDs
Previous Versions: The Threshold of the PEAK/SIGNAL LED was fixed at
-6.0dB.
Version 2.0: The Threshold of the PEAK/SIGNAL LED can now be adjusted
from -10dB through 0.0dB. In the [UTILITY>OSC/BATT] window, there is a
[PEAK LED THL] knob with a value in middle level of right side.
Cursor to the [PEAK LED THL] knob, and operate JOG dial. Factory
Default value is -6.0dB.
24. Correction of freezing when faders are moved manually during...](http://img.usermanuals.tech/thumb/58/62071/w64_da-7_en_v2_Utility_Users_om_d-59.png "Page 60
23. New Threshold level adjustment of analog input PEAK/SIGNAL LEDs
Previous Versions: The Threshold of the PEAK/SIGNAL LED was fixed at
-6.0dB.
Version 2.0: The Threshold of the PEAK/SIGNAL LED can now be adjusted
from -10dB through 0.0dB. In the [UTILITY>OSC/BATT] window, there is a
[PEAK LED THL] knob with a value in middle level of right side.
Cursor to the [PEAK LED THL] knob, and operate JOG dial. Factory
Default value is -6.0dB.
24. Correction of freezing when faders are moved manually during...")
![Page 63
Section 4
APPENDIX
New Default Settings
Upgraded Default Settings
From Versions 1.10/ V1.02/ 1.1./ 1.20
The comparison of the latest version (V 2.00) with the previous versions
(V1.00 through 1.20) is shown.
Window Group [MONITOR SETUP]
Item Parameter Previous V 2.00
SOLO MON POSITION IN PLACE PFL
MODE SOLO MIX
Window Group [CUSTOMIZE]
Item Parameter Previous V 2.00
ASSIGN CH CH1 INPUT 1 NONE
CH2 INPUT 2 NONE
CH3 INPUT 3 NONE
CH4 INPUT 4 NONE
CH5 INPUT 5 NONE
CH6 INPUT 6 NONE
CH7 INPUT 7 NONE
CH8...](http://img.usermanuals.tech/thumb/58/62071/w64_da-7_en_v2_Utility_Users_om_d-62.png "Page 63
Section 4
APPENDIX
New Default Settings
Upgraded Default Settings
From Versions 1.10/ V1.02/ 1.1./ 1.20
The comparison of the latest version (V 2.00) with the previous versions
(V1.00 through 1.20) is shown.
Window Group [MONITOR SETUP]
Item Parameter Previous V 2.00
SOLO MON POSITION IN PLACE PFL
MODE SOLO MIX
Window Group [CUSTOMIZE]
Item Parameter Previous V 2.00
ASSIGN CH CH1 INPUT 1 NONE
CH2 INPUT 2 NONE
CH3 INPUT 3 NONE
CH4 INPUT 4 NONE
CH5 INPUT 5 NONE
CH6 INPUT 6 NONE
CH7 INPUT 7 NONE
CH8...")
![Page 64
CH14 INPUT14 NONE
CH15 INPUT15 NONE
CH16 INPUT16 NONE
BUS1 BUS 1 NONE
BUS3 BUS 3 NONE
BUS5 BUS 5 NONE
BUS7 BUS 7 NONE
Window Group [DIGITAL INPUT]
Item Parameter Previous V 2.00
DIGITAL OUTPUT REC-OUT AUX1/2 --- AES/EBU
SELECT SLOT 1 1-4 --- AES
SLOT 1 5-8 --- AES
SLOT 2 1-4 --- AES
SLOT 2 5-8 --- AES
SLOT 3 1-4 --- AES
SLOT 3 5-8 --- AES
4-2](http://img.usermanuals.tech/thumb/58/62071/w64_da-7_en_v2_Utility_Users_om_d-63.png "Page 64
CH14 INPUT14 NONE
CH15 INPUT15 NONE
CH16 INPUT16 NONE
BUS1 BUS 1 NONE
BUS3 BUS 3 NONE
BUS5 BUS 5 NONE
BUS7 BUS 7 NONE
Window Group [DIGITAL INPUT]
Item Parameter Previous V 2.00
DIGITAL OUTPUT REC-OUT AUX1/2 --- AES/EBU
SELECT SLOT 1 1-4 --- AES
SLOT 1 5-8 --- AES
SLOT 2 1-4 --- AES
SLOT 2 5-8 --- AES
SLOT 3 1-4 --- AES
SLOT 3 5-8 --- AES
4-2")
![Page 65
4-3
Upgraded Default Settings
From Version 1.21 to Version 2.00
The comparison of the latest version (V 2.00) with the previous version
(V 1.21) is shown.
Window Group [CHANNEL]
Item Parameter Previous V 2.00
CH ON (for AUX SEND&BUS only) OFF ON
FADER (for AUX SEND&BUS only) – °0
Window Group [DYNAMICS]
Item Parameter Previous V 2.00
COMP+GATE COMP ATT 10ms 35ms
EXPANDER EXP ATT 10ms 35ms
Window Group [OSCILLATOR]
Item Parameter Previous V 2.00
PEAK THL LEVEL --- -6.0
Window Group [CONFIGRATION]
Item...](http://img.usermanuals.tech/thumb/58/62071/w64_da-7_en_v2_Utility_Users_om_d-64.png "Page 65
4-3
Upgraded Default Settings
From Version 1.21 to Version 2.00
The comparison of the latest version (V 2.00) with the previous version
(V 1.21) is shown.
Window Group [CHANNEL]
Item Parameter Previous V 2.00
CH ON (for AUX SEND&BUS only) OFF ON
FADER (for AUX SEND&BUS only) – °0
Window Group [DYNAMICS]
Item Parameter Previous V 2.00
COMP+GATE COMP ATT 10ms 35ms
EXPANDER EXP ATT 10ms 35ms
Window Group [OSCILLATOR]
Item Parameter Previous V 2.00
PEAK THL LEVEL --- -6.0
Window Group [CONFIGRATION]
Item...")
![Page 66
4-4
Window Group [INPUT MATRIX]
Item Parameter Previous V 2.00
FDR 1 --- INPUT 1
FDR 2 --- INPUT 2
FDR 3 --- INPUT 3
FDR 4 --- INPUT 4
FDR 5 --- INPUT 5
FDR 6 --- INPUT 6
FDR 7 --- INPUT 7
FDR 8 --- INPUT 8
FDR 9 --- INPUT 9
FDR 10 --- INPUT 10
FDR 11 --- INPUT 11
FDR 12 --- INPUT 12
FDR 13 --- INPUT 13
FDR 14 --- INPUT 14
FDR 15 --- INPUT 15
FDR 16 --- INPUT 16
FDR 17 --- INPUT 17
FDR 18 --- INPUT 18
FDR 19 --- INPUT 19
FDR 20 --- INPUT 20
FDR 21 --- INPUT 21
FDR 22 --- INPUT 22
FDR 23 --- INPUT 23
FDR...](http://img.usermanuals.tech/thumb/58/62071/w64_da-7_en_v2_Utility_Users_om_d-65.png "Page 66
4-4
Window Group [INPUT MATRIX]
Item Parameter Previous V 2.00
FDR 1 --- INPUT 1
FDR 2 --- INPUT 2
FDR 3 --- INPUT 3
FDR 4 --- INPUT 4
FDR 5 --- INPUT 5
FDR 6 --- INPUT 6
FDR 7 --- INPUT 7
FDR 8 --- INPUT 8
FDR 9 --- INPUT 9
FDR 10 --- INPUT 10
FDR 11 --- INPUT 11
FDR 12 --- INPUT 12
FDR 13 --- INPUT 13
FDR 14 --- INPUT 14
FDR 15 --- INPUT 15
FDR 16 --- INPUT 16
FDR 17 --- INPUT 17
FDR 18 --- INPUT 18
FDR 19 --- INPUT 19
FDR 20 --- INPUT 20
FDR 21 --- INPUT 21
FDR 22 --- INPUT 22
FDR 23 --- INPUT 23
FDR...")
3-19 25. New factory default settings Previous Version: The factory defaults for the AUX Sends and the BUS Channels were OFF. The Fader Levels for the Aux Sends and BUS Channels were (– °dB). Version 2.0: The factory defaults for the AUX Sends and the BUS Channels are now ON. The FADER Levels for the AUX Sends and BUS Channels are now set to ±0dB. 26. New LCD Display default Change Previous Version: Several windows in the LCD display were hot highlighted. Version 2.0:Now, once you change the value in the [TIME BASE], [SETUP] or [EXECUTE] area in the [AUTOMATION] window, and the [SAMPLE] value of the [DELAY] area in the [DYNAMICS] window, along with the other parameters, will display their values in reverse video until you press the [ENTER] key. 27. New default setting for Compressor/Limiter Previous Version: The default setting for the Compressor/Limiter Attack time was 10ms. Version 2.0: The new default setting for the Compressor/Limiter Attack time is now 35ms. All other settings remain the same.
Section 4 APPENDIX New Default Settings Upgraded Default Settings From Versions 1.10/ V1.02/ 1.1./ 1.20 The comparison of the latest version (V 2.00) with the previous versions (V1.00 through 1.20) is shown. Window Group [MONITOR SETUP] Item Parameter Previous V 2.00 SOLO MON POSITION IN PLACE PFL MODE SOLO MIX Window Group [CUSTOMIZE] Item Parameter Previous V 2.00 ASSIGN CH CH1 INPUT 1 NONE CH2 INPUT 2 NONE CH3 INPUT 3 NONE CH4 INPUT 4 NONE CH5 INPUT 5 NONE CH6 INPUT 6 NONE CH7 INPUT 7 NONE CH8 INPUT 8 NONE CH9 INPUT 9 NONE CH10 INPUT10 NONE CH11 INPUT11 NONE CH12 INPUT12 NONE CH13 INPUT13 NONE 4-1
CH14 INPUT14 NONE CH15 INPUT15 NONE CH16 INPUT16 NONE BUS1 BUS 1 NONE BUS3 BUS 3 NONE BUS5 BUS 5 NONE BUS7 BUS 7 NONE Window Group [DIGITAL INPUT] Item Parameter Previous V 2.00 DIGITAL OUTPUT REC-OUT AUX1/2 --- AES/EBU SELECT SLOT 1 1-4 --- AES SLOT 1 5-8 --- AES SLOT 2 1-4 --- AES SLOT 2 5-8 --- AES SLOT 3 1-4 --- AES SLOT 3 5-8 --- AES 4-2
4-3 Upgraded Default Settings From Version 1.21 to Version 2.00 The comparison of the latest version (V 2.00) with the previous version (V 1.21) is shown. Window Group [CHANNEL] Item Parameter Previous V 2.00 CH ON (for AUX SEND&BUS only) OFF ON FADER (for AUX SEND&BUS only) – °0 Window Group [DYNAMICS] Item Parameter Previous V 2.00 COMP+GATE COMP ATT 10ms 35ms EXPANDER EXP ATT 10ms 35ms Window Group [OSCILLATOR] Item Parameter Previous V 2.00 PEAK THL LEVEL --- -6.0 Window Group [CONFIGRATION] Item Parameter Previous V 2.00 CONFIG RS422 9PIN --- OFF PROTOCOL 3+1 SURROUND --- OFF MODE
4-4 Window Group [INPUT MATRIX] Item Parameter Previous V 2.00 FDR 1 --- INPUT 1 FDR 2 --- INPUT 2 FDR 3 --- INPUT 3 FDR 4 --- INPUT 4 FDR 5 --- INPUT 5 FDR 6 --- INPUT 6 FDR 7 --- INPUT 7 FDR 8 --- INPUT 8 FDR 9 --- INPUT 9 FDR 10 --- INPUT 10 FDR 11 --- INPUT 11 FDR 12 --- INPUT 12 FDR 13 --- INPUT 13 FDR 14 --- INPUT 14 FDR 15 --- INPUT 15 FDR 16 --- INPUT 16 FDR 17 --- INPUT 17 FDR 18 --- INPUT 18 FDR 19 --- INPUT 19 FDR 20 --- INPUT 20 FDR 21 --- INPUT 21 FDR 22 --- INPUT 22 FDR 23 --- INPUT 23 FDR 24 --- INPUT 24 FDR 25 --- INPUT 25 FDR 26 --- INPUT 26 FDR 27 --- INPUT 27 FDR 28 --- INPUT 28 FDR 29 --- INPUT 29 FDR 30 --- INPUT 30 FDR 31 --- INPUT 31 FDR 32 --- INPUT 32
Window Group [SLOT OUT] Item Parameter Previous V 2.00 SLOT 3 TANDEM LAYER LINK --- ON Window Group [FADER GROUP] Item Parameter Previous V 2.00 GROUP 5 ON/OFF --- ON GROUP 6 ON/OFF --- ON BUS 1 GROUP 5 ON/OFF --- OFF BUS 2 GROUP 5 ON/OFF --- OFF BUS 3 GROUP 5 ON/OFF --- OFF BUS 4 GROUP 5 ON/OFF --- OFF BUS 5 GROUP 5 ON/OFF --- OFF BUS 6 GROUP 5 ON/OFF --- OFF BUS 7 GROUP 5 ON/OFF --- OFF BUS 8 GROUP 5 ON/OFF --- OFF BUS 1 GROUP 6 ON/OFF --- OFF BUS 2 GROUP 6 ON/OFF --- OFF BUS 3 GROUP 6 ON/OFF --- OFF BUS 4 GROUP 6 ON/OFF --- OFF BUS 5 GROUP 6 ON/OFF --- OFF BUS 6 GROUP 6 ON/OFF --- OFF BUS 7 GROUP 6 ON/OFF --- OFF BUS 8 GROUP 6 ON/OFF --- OFF 4-5
avM0200-0 Printed in Japan © Matsushita Communication Industrial Co., Ltd. 2000