Panasonic Wide Screen Tv Ct 34wx53 Operating Instructions

							41
Blocking Message
If V-Chip is enabled and the program exceeds the rating limit set by you, the blocking message will appear and the audio
will be muted. Enter your four-digit secret code if you wish to continue viewing the program. After entering your code, all
locks and rating blocks are disabled until the TV is turned off or until all settings are off.
Note:
If you enter your four-digit secret code to override rating blocks, you must reset
all rating blocks by either reprogramming or turning the TV off.
Split Screen Blocking Message
PIP function is available when V-Chip is activated. If the program being viewed in PIP exceeds the set rating limit, PIP will
disappear and a blocking message will be displayed.
Note:
Enable PIP functions by setting Lock Set, U.S. TV PROGRAM,  U.S. MOVIES,
CANADIAN ENGLISH and/or  CANADIAN FRENCH to OFF.
PIP Blocking Message
Split Screen function is available when V-Chip is activated. If the program being viewed in Split Screen exceeds the set
rating limit, Split Screen will disappear and a blocking message will be displayed.
Note:
Enable Split Screen functions by setting Lock Set, U.S. TV PROGRAM,  U.S.
MOVIES, CANADIAN ENGLISH and/or  CANADIAN FRENCH to OFF.
PROGRAM  RATING EXCEEDED
ACCESS  CODE
PROGRAM
RATING
EXCEEDED
ACCESS
CODE
PIP  RATING
EXCEEDED
LOCK Feature
After setting the LOCK SET and V-CHIP SET, set the blocking hours.
HOW LONG?
Press to select 12HOURS/24HOURS/48HOURS /
ALWAYS.ACTIONCH
CH VOL VOL
Press to select HOW LONG?
12HOURS 24HOURS
48HOURS ALWAYS
LOCK  SET
V-CHIP  SET
HOW  LONG?
CODE
PRESS  ACTION  FOR  MAIN  MENULOCK
OFF
U.S. MOVIES
SESTTING:
12HOURS BLOCK  PROGRAMS :
CHANGE  CODE 
						

							42
Picture in Picture Operation
This television includes a two-tuner Picture In Picture (PIP) feature. This allows you to watch two (2) live broadcasts at the
same time with or without an external video source such as a VCR, cable box, etc.
Basic PIP Operation
1Press the PIP button on the remote control to display the PIP
Frame on screen.
Note:
Audio is from Main Picture
only.
2Select channels for the PIP frame by pressing PIP CH
VCR CH .
3Press to select channel for the Main Picture.
or
Use the remote control numeric keypad.
Main Picture
 Picture-in-Picture Frame
4Press to view picture source status.
5Press PIP again to cancel the PIP Frame.
SWAP
Press  SWAP to switch the PIP and MAIN PICTURE source.
PIP
PIP CH
VCR CH
ACTIONCH
CH VOL VOL
123
456
78
09
RECALL
PIP
SWAP
A
B
ABB
A
DTV
AUXDVD
VCR
DBS
RCVR
POWER
BBE
MENU
PLAY R-TUNE PROGGUIDESAP
PAGE EXIT
STOP PAUSEREC
CBL
VOL VOL
ACTION
TV
123
456
789
0
CH
CH
MUTEASPECTTV/VIDEOLIGHT
SPLIT
RECALL
PIP MAXFFPIP MINREW
FREEZETV/VCRPIP CH
VCR CHSEARCHOPEN/CLOSE
SWAPPIPMOVE 
						

							43
Picture in Picture Operation
PIP MIN, PIP MAX
Freeze
These features are used to size PIP Frame.
Press PIP MINREW or 
PIP MAXFF to size the PIP Frame.
During PIP operation this feature is used to stop action in PIP frame.
PIP MINREWPIP MAXFF
FREEZETV/VCR
Press FREEZETV/VCR again to continue action. Press 
FREEZETV/VCR to stop PIP frame action.
 1  In PICTURE MENU OTHER ADJ, select FREEZE
PIP or SPLIT (see p26).
 2  Press FREEZETV/VCR while PIP frame is not displayed.
1
2
Note:
To stop action for Main picture:Minimum MAX
Main Picture
FREEZE
Main Picture
TV/VIDEO Button
Press when PIP frame is displayed to select desired input mode.
Main Picture
TV/VIDEO
Picture-in-Picture Frame
   CH #   CH #PIP COMPONENT 1 PIP DIGITAL-INPIP COMPONENT 2
PIP VIDEO 1
PIP VIDEO 2 PIP VIDEO 3PIP VIDEO 4 PIP VIDEO 4
Search
This feature lets you scan through all available channels.
MOVE
SEARCHOPEN/CLOSE
Press SEARCHOPEN/CLOSE to display search frames.1
2
Press SEARCHOPEN/CLOSE again to stop search feature. This  returns
the screen to the previous condition (single screen, PIP
screen or SPLIT screen).
Move
This feature is used to move PIP frame to one of four corners.
Press 
MOVE to position PIP frame to desired corner.
Search Frames
Main Picture
PIP Frames
Main Picture 
						

							44
This feature lets you watch two different channels side by side with or without an external video source.
The audio is from the Main picture only (left side).
Split screen enables you to search other channels on the right screen or check video recording status.
Split Screen
Notes:
(1) Sound from the left screen is output from the speakers on the TV set (and headphone jack).
(2) When the screen is split, signals of the left screen are output from the rear monitor output terminal.
(3) The left and right screens are processed by individual circuits, and therefore, may have slight variation in image quality.
(4) Split screen returns to single screen when the TV is turned off.
(5) The right and left screens cannot display the same picture at the same time.
DTV
AUXDVD
VCR
DBS
RCVR
POWER
PIP MAXFF
MOVERECALL
BBE
MENU
PLAY R-TUNE PROGGUIDESAP
PAGE EXIT
PIPSTOP PAUSERECPIP MINREW
CBL
VOL VOL
ACTION
TV
123
456
789
0
CH
CH
MUTEASPECTTV/VIDEOLIGHT
FREEZETV/VCR
SWAPSPLIT
PIP CH
VCR CHSEARCHOPEN/CLOSE
(The previously selected screen appears.)
1
Main Picture
Splitting the screen
Press SPLIT to display Split screen.
Split Screen
2Returning to one screen.
Press 
SPLIT again to return.
Main Picture
Freezing pictures
1
During Split Screen this feature is used to stop action in SPLIT screen.
Press 
FREEZETV/VCR to stop action in SPLIT screen.FREEZETV/VCR
FREEZE
Press 
FREEZETV/VCR again to recover.2
 1  In PICTURE MENU OTHER ADJ, select FREEZE
PIP or SPLIT (see p26).
 2  Press FREEZETV/VCR while SPLIT frame is not displayed. Note:
To stop action for Main picture: 
						

							45
Split Screen
Changing the channels for the Split Screen Swapping left and right screens
Changing the channels for the Main Picture
Select channels for the Main Picture by pressing CHCH
or use the remote control numeric keypad.
Viewing Videos
While Split screen is displayed, press TV/VIDEO to
switch modes. Select channels for the Split Screen by
pressing 
PIP CH
VCR CH .Press 
SWAP to switch the SPLIT SCREEN and
MAIN PICTURE source.SWAP
CH10
CH10
CHCH
123
456
78
09
CH10
CH5
CH10
CH5CH5
CH10
TV/VIDEO
CH10VIDEO 1
Searching the other channels
press SEARCHOPEN/CLOSE to search the other channels.SEARCHOPEN/CLOSE
Press SEARCHOPEN/CLOSE again to stop the search.
This returns the screen to its previous condition.
Search Frames
CH10
PIP CH
VCR CH 
						

							46
ASPECT Controls
The color monitor will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema format
picture.
ASPECT button
The aspect mode changes each time the ASPECT button is pressed.
Notes:
(1) For a 480p signal input during component input signal mode, the
mode will change as follows:
(2) When a 1080i signal is being received, the mode is set to FULL, and
aspect switching is not possible.
(3) During PIP operation, ASPECT Controls are available only in the
main picture according to the receiving signal of the main picture.
(4) During SPLIT Screen, ASPECT Controls are not available.
ASPECT
ACTION
TV
DTVCBL
AUXDVD
VCR
DBS
RCVR
CH
CH VOL VOL
RECALLSAPBBE
MENU
POWER
MUTEASPECTTV/VIDEOLIGHT
ZOOM FULL JUST
4 : 3
4 : 3 FULL ZOOM
4 : 3 will display a 4:3 picture at its standard 4:3 size.
ZOOM mode magnifies the central section of the
picture.
FULL will display the picture at its maximum size but
with slight elongation.
JUST mode will display a 4:3 picture at its maximum
size but with aspect correction applied to the sides
of the screen so that elongation is only apparent at
the left and right edges of the screen. The size of the
picture will depend on the original signal.
Mode
Picture Explanation
4 : 3
ZOOM
FULL
JUST
JUST4
39 16
ZOOM4
316
9
FULL4
316
9
4 : 3
3 4 
						

							47
Operating peripheral equipment using the remote control
Programming The Illuminated Remote Control Using Access Codes
The Universal Remote Control can be programmed to operate many manufacturers’ components, using the component
function buttons for VCR, DVD, AUX, RCVR, TV, DTV CABLE or DBS. Follow the procedures for programming your
Remote Control with or without a code for the component.
Determine the manufacturer of the component and look in the table for the code.
1Confirm that the external component is plugged in and operating.
2Turn the component off.
3
TV
DTVCBL
AUXDVD
VCR
DBS
RCVR4
POWER  +  ACTIONCH
CH VOL VOL
123
456
78
095
Press POWER and ACTION together, for at least 5 seconds.
After 5 seconds, all the illuminated mode keys will begin to flash.
Release the POWER and ACTION keys.
Press the mode key.
The mode key will illuminate steadily, all others will go out.
Enter the 3-digit component code using the Remote Control numeric keypad.
6POWERPress the Remote Control POWER to test the component. If the procedure is successful,
the component will turn on.
If the component does not operate with the Remote Control, repeat the
procedure using another code. (Some brands have multiple codes).
If an incorrect code is entered, or if the procedure takes longer than 30
seconds,the programming will fail.
Helpful Hints: Unsuccessful Code
Device
TV
DTV
CABLE
DBS
VCR
DVD/CD
AUX
RCVROperates
TV (Panasonic Only)
DTV (Panasonic Only)
CABLE (Preset)
DBS (Preset)
VCR (Preset)
DVD and CD (Preset)
Personal Video Recorders,
Tape and VCR2
Audio Receiver (Preset)Default
Panasonic TV Codes
Panasonic DTV Codes
Panasonic CABLE Codes
Panasonic DBS Codes
Panasonic VCR Codes
Panasonic DVD Codes
Panasonic Personal Video
Recorders Code
Panasonic RCVR Code
  Default Modes For Remote Control 
						

							48
Programming Without A Code (When the code is not known)
This procedure searches all codes and is called the “sequence method.”
1Confirm that the external component is plugged in and on.
2Turn the component off.
3
TV
DTVCBL
AUXDVD
VCR
DBS
RCVR4
POWER  +  ACTIONCH
CH VOL VOLPress POWER and ACTION together, for at least 5
seconds.
After 5 seconds, all the illuminated mode keys will
begin to flash.
Release the POWER and ACTION key.
Press the mode key.
The mode key will illuminate steadily, all others will go
out.
Press to move forward to the next code, or to move
backward.
Press the Remote Control 
POWER to test the component. If the procedure was
successful, the component will turn on.
5
6
POWER
PIP MAXFF
RECALL
MOVE SPLITPLAY R-TUNE PROGGUIDESAP
PAGE EXIT
STOP PAUSEREC
PIP MINREW
SEARCHOPEN/CLOSE
MUTEASPECTTV/VIDEOLIGHT
FREEZETV/VCR
PIP
PIP CH
VCR CH
CH
CH VOL VOL
ACTION
SWAP
POWER
BBE
MENU
123
456
78
09
DTV
AUXDVD
VCR
DBS
RCVR
CBL
TV
ACTIONCH
CH VOL VOL
Note:
The step and set mode will start from the current device (not the beginning of the
list, except for the first time). Note:
Repeat the above steps until the component code is found. It may take many
attempts before the correct code is found.
7ACTIONCH
CH VOL VOLAfter the code is found, press ACTION to store the code.
Operating peripheral equipment using the remote control 
						

							49
Operating peripheral equipment using the remote control
The remote control is capable of operating many brands of peripheral equipment. Refer to pages 50 and 51 for programming procedures.
Note: The remote control memory is limited and therefore some models may not operate. The remote control is not
designed to control all features available in all models.
Note: After entering the proper infrared code, press the desired Mode Selection Button on the remote control. Refer to
pages 16 and 47 - 48 for details on operating peripheral equipment using the remote control.
Infrared Codes Index
Infrared Remote Codes for Specific Components
Helpful Hint: Write down the code numbers for your components in the space provided below. This will serve as a
handy reference whenever you need to reprogram your remote control.
CABLE
Cable Box
DBS
Digital Broadcast System
Other Component
Other Component
VCR
Video Cassette Recorder
RCVR
Receiver or Amplifier
Other Component
Other Component
CD
Compact Disc Player
LD
Laser Disc Player
Other Component
Other Component
        Brand Code
Orion 320, 326
Panasonic 321, 322, 323, 324
J.C.Penney300, 305, 310, 311, 324, 339, 345
Pentax 300, 311, 345
Philco 320, 323, 324, 326, 331, 343
Philips 323, 324, 331
Pioneer 323
Proscan 300, 301, 302, 323, 324, 331,
333, 345, 346
Quasar 321, 322, 323, 324
Radio Shac 305, 309, 324, 333, 336, 340
RCA 300, 301, 302, 323, 324, 331,
333, 345, 346
Realistic 305, 309, 324, 336, 340
Samsung 302, 304, 333
Sansui 320, 326, 339, 352
Sanyo 305, 309, 313
Scott 301, 302, 304, 309, 320, 326,
338, 340, 347, 348
Sears 300, 305, 306, 307, 308
Sharp 335, 336
Shintom 317
Signature 2000 335
Singer 317
Sony 328, 329, 330
Sylvania 323, 324, 331
Tashiro 306
Tatung 310, 311, 339
Teac 310, 311, 339
Technics 321, 322, 323, 324
Teknika 324
Toshiba 301, 346
Vector Research 311
Wards 306, 309, 335, 336, 344
Yamaha 305, 310, 311, 339
Zenith 306, 344
        Brand Code
Admiral 335
Aiwa 332
Akai 314, 315, 316, 329
Audio Dynamic 311, 339
Bell &Howell 305, 313
Broksonic 320, 326
Canon 323, 325
Citizen 306
Craig 305, 306, 329
Curtis Mathes 324, 345
Daewoo 301, 324, 343
DBX 310, 311, 339
Dimensia 345
Emerson 303, 319, 320, 325, 326, 343
Fisher 305, 307, 308, 309, 313
Funai 320, 326, 334
GE 324, 333, 345
Goldstar 306
Gradiente 334
Hitachi 300, 323, 345
Instant Replay 323, 324
Jensen 339
JVC 310, 311, 334, 339
Kenwood 306, 310, 311, 339
LXI 300, 305, 306, 307, 308, 309
Magnavox 323, 324, 331
Marantz 310, 311, 339
Marta 306
Memorex 309, 324
MGA 338, 340, 341, 347, 348
Minolta 300, 345
Mitsubishi 338, 340, 341, 347, 348
Multitech 304, 347
NEC 310, 311, 334, 339
Olympic 323, 324
Optimus 306, 321, 328, 335
VCR
Codes for VCR 
						

							50
        Brand Code
Panasonic Replay100
Philips Tivo 101
Sony Tivo 102
VCR
Codes for Personal Video Recorders
        Brand Code
Denon 100
Ferguson 101
JVC 109
Mitsubishi 105
Nordmende 101
Panasonic 100
Philips 103
Pioneer 102
RCA 101
Codes for DVD
DVD        Brand Code
Saba 101
Samsung 110
Sharp 108
Sony 104
Technics 100
Thomson 101
Toshiba 103
Yamaha 100
Zenith 107
        Brand Code
Admiral 226
Aiwa 233, 235
Carver 229
Denon 242
Emerson 239
Fisher 205
Harman/Kardon 219, 220, 221, 223
Hitachi 207
Jensen 234
JVC 240, 241, 245
Kardon 223
Kenwood 200, 201, 211, 245
LXI/Sears 236
Magnavox 229, 232
Marantz 229
McIntosh 221
Nakamichi 210
Onkyo 214, 215
Codes for CD
DVD        Brand Code
Optimus 208, 218, 220, 222
Panasonic 224, 225, 227
Philips 229, 230
Pioneer 208
Quasar 224, 225, 227
RCA 231, 237, 238, 247
Sansui 210, 246
Sanyo 205
Scott 210, 246
Sharp 242, 243
Sherwood 220
Sony 228
Soundesign 244
Teac 212, 216, 218
Technics 224, 225, 227
Victor 240, 241, 245
Yamaha 202, 203, 204
        Brand Code
Aiwa 223, 224, 225
Denon 231
Fisher 203
Jensen 214
JVC 229, 230
Kenwood 200, 207
Marantz 202
Nakamichi 205
Onkyo 208, 209, 213
Panasonic 216, 218
Codes for Cassette Deck
        Brand Code
Philips 222
Pioneer 204
RCA 226, 227, 228
Sansui 205, 210
Sharp 231
Sony 219, 220
Teac 210, 211, 215
Technics 216, 218
Yamaha 201, 202
AUX
Operating peripheral equipment using the remote control