Panasonic Wireless PT-LB50NTE/PT-LB55NTE/PT-LB60NTE, PT-LB50NTU/PT-LB60NTU Instruction Manual

51

Network setting of the projector (cont.)
 ENCRYPTION  :   Select  the  encryption  method  to  be  used  for  communication 
between the projector and the network.
  NONE   :   Select when transmit without encryption. It is selectable only when  [AUTHENTICATION] is [OPEN] or [SHARED].
  WEP
Þ    :  Select when ENCRYPTION is WEP.
  TKIPÞ    :  Select when ENCRYPTION is TKIP. 
        Selectable when [AUTHENTICATION] is [WPA-PSK].
  AES
Þ    :  Select when ENCRYPTION is AES. 
        Selectable...

52

Network setting of the projector (cont.)
The  following  is  set  as  [USER1]-[USER3]  in  the  wireless  menu  before  the  projector 
leaves the factory.SSID  :  Panasonic Projector
DHCP  :  OFF
IP ADDRESS  :  192.168.10.100
SUBNETMASK  :  255.255.255.0
GATEWAY  :  192.168.10.1
MODE  :  AD HOC
AUTHENTICATION  :  OPEN
ENCRYPTION  :  NONE
Default settings of [USER1]-[USER3] 

53

Using WebBrowser
Select [WEB CONTROL] on the wireless menu.1
Select [ON] or [OFF] with the [] buttons.
ON  : This enables control on the WebBrowser.
OFF : This disables control on the WebBrowser.2
Control a projector through the WEB browser of a computer. It is called “WEB Control”.
(The example is when using Microsoft Internet Explorer.)
• Connect projector and computer. (See page 14)
• Release the proxy settings of the Web Browser used. (See next page)
• Enable JavaScript.  (See page 55)
RETURN...

54

Using WebBrowser (cont.)
Open “Internet Properties” window.
Click  [Start]  →  [Control  Panel]  →  [Network  and  Internet  Connections]  → 
[Internet Option].
1
2Open [Connections] → [LAN 
Settings].
3If [Use a proxy server for your LAN] has been checked, 
remove the check.
If [Use automatic configuration script] has been 
checked, remove the check.
4Click [OK].
 Proxy server settings
Release the proxy settings of the WebBrowser used.
„ Computer settings 

55

Using WebBrowser (cont.)
 Enabling JavaScript
If JavaScript has been set to disable, enable it.
2Select [Security] and set the security level to [Default 
Level], or select [Custom Level] and check the [Enable] 
checkbox under [Active scripting]. Open “Internet Properties” window.
Click  [Start]  →  [Control  Panel]  →  [Network  and  Internet  Connections]  → 
[Internet Option].
1 

56

Accessing from the Web browser

Using WebBrowser (cont.)
1Click [] on the launcher.
Or start up the WebBrowser, and enter the IP address 
set by the projector.
WebBrowser starts up and the page of “Projector control window” appears.
2Select the language to be displayed, and if a web 
access password has been set, enter that password.
3Click [ENTER].
“Basic control window” appears. (Next page)
•  Password used in this page is for accessing the web control window. (See page 58) 
  This password is...

57

You can make various projector settings.
Click [Projector Control]→[Basic] or [Advanced], when moving from other 
pages.
Using WebBrowser (cont.)
Projector control window
 Basic control window Option control window
Connection  with  the  projector  may  not  be  possible  immediately  after  the  power  is 
turned on. In this case wait a bit and then make the connection again. 

58

Using WebBrowser (cont.)
This page indicates the projector status.
Click [Status].
Monitor information window
The monitor information is refreshed at fixed intervals, but the current exact information 
can be checked by clicking [View] → [Refresh].
Set the password to access to “Projector control window”.
Enter the old password and new password, and click [OK].
You can enter a password up to 16 characters (upper case/lower case) and 
symbols.
Password changing window 

59

3Click [NEXT].
The settings will be registered.
 Making the above settings effective
 Select  [NETWORK]  in  the  wireless  menu  of  the  projector,  and  use  the  []  buttons 
to select the network set in this page and press the [ENTER] button.
Using WebBrowser (cont.)
You  can  make  detail  network  settings  on  projector,  when  connecting  without  the 
administrator  authority  or  when  connecting  through  an  access  point  (infrastructure 
mode).
Network setting window
1Click [Network...

60

Software Uninstall
Wireless Manager ME 3.0
From the desktop, select [Start] → [All Programs] → 
[Panasonic Wireless Display] → [Uninstall Wireless Manager 
mobile edition 3.0].
Follow the instructions appearing on the screen and uninstall the software.