Pcs Phone Sanyo Vm4500 User Guide

Changing the Ringer Volume
To change the ringer volume, press the Side Volume key when the
phone is in standby mode.
Note:To change the ringer volume from the main menu, see “Adjusting thePhone’s Volume Settings” on page 49.
Adjusting Volume During a Conversation
When you need to adjust the receiver volume during a conversation,
use the side volume key, or  / on the Navigation key while a call is
in progress.
Muting a Call
There are times when it’s necessary to mute a call so that your caller
does not...

Missed Call Notification for Voice Calls
When an incoming voice call is not answered, the Missed Call
Notification is displayed on your screen.
To call the last Missed Voice Call:
Simply press  or  while the Missed Call Notification is
displayed.
To display the Missed Voice Call Log:
Press View(left softkey). (To call an entry, highlight the entry
you want to call and press  or  .)
Calling Emergency Numbers
You can place calls to 911 (dial  and press ) even if
your phone is locked or your account is...

Dialing Options
Dialing options are displayed when you press after entering
numbers in the phone’s standby mode.
To select an option, highlight it and press .
Callto dial the phone number.
Call:Speaker Onto dial the phone number in speakerphone mode.
Save Phone#to save the phone number in your Contacts list.
(See “Saving a Phone Number” on page 23.)
Hard Pauseto insert a hard pause. (See “Dialing and Saving
Phone Numbers With Pauses” on page 24.)
2-Sec. Pauseto insert a 2-second pause. (See “Dialing...

In-Call Options
During a call, your phone displays menu options when you press  .
To select an option, highlight it and press  .
Flashto answer an incoming Call Waiting call or to connect a third
party during Three-Way Calling.
Muteor Unmute
Select Muteto mute your phone’s microphone. Select Unmuteto
reactivate the microphone.
Speaker Onor Speaker Offto activate or deactivate speakerphone
mode. You can adjust the speakerphone volume using the Side
Volume key.
Warning!Due to higher volume levels, do...

End-of-Call Options
To display the following options, press  within 10 seconds after
disconnecting a call.
To select an option, highlight it and press  .
Call Againto dial the phone number.
Call:Speaker Onto dial the phone number in speakerphone mode.
Save Phone#to save the phone number in your Contacts list.
Go to Phone Bookappears when the number is already in your
Contacts list. (See “Saving a Phone Number” on this page.)
Note:The End-of-Call options are not displayed for calls identified as No ID...

Finding a Phone Number
You can search Contacts entries for phone numbers that contain a
specific string of numbers.
To find a phone number:
1.Enter the last four or more digits of the number and press  .
The more numbers you enter, the more specific the search
becomes.
2.Highlight Findand press  .
3.The Contacts entry that ends with the digits you entered appears.
4.Highlight your desired entry.
Press  to display the entry details.
Press  or  to dial.
Dialing and Saving Phone Numbers With Pauses
You...

Abbreviated Dialing
When you enter four digits of a phone number, the screen displays
“Abbrev. Dial.” Your phone dials the phone number in your Contacts
list that ends with the four digits you entered.
To make a call using Abbreviated Dialing:
1.Enter the last four digits of a Contacts entry’s phone number.
2.Press  to display the dialing options.
3.Highlight Abbrev. Dialand press  , , or  .
Note:If there are more than two matched numbers in your Contacts list, the
number that comes first alphabetically...

Using Speed Dialing
With this feature, you can dial your favorite entries using one key
press for locations 2-9 (see page 64 for setting Speed Dialing).
To use speed dial for voice calls:
From standby mode, press and hold the appropriate key for
approximately two seconds.
– or –
From standby mode, press the appropriate key and 
press  or  .
The display confirms that the number has been dialed when it shows
“Connecting...”.
To use speed dial for PCS Ready Link calls:
From standby mode, press the...

Using PCS Ready Link
PCS Ready Link allows you to connect with your friends, family and
co-workers with just one push of a button. You can make 1-to-1 or 
1-to-many calls instantly like a two-way radio. This feature provides a
range of solutions to meet your communications needs. You can
make and receive PCS Ready Link calls when your phone displays  .
Preparing Your Phone for PCS Ready Link Service
The first time you use your PCS Vision Ready Link Phone, your phone
must identify itself and make itself...

Ready Link Call Alerts
There are several ways your PCS Phone alerts you during PCS Ready
Link calls.
When you make or receive a PCS Ready Link call:
The phone beeps.
The backlight illuminates.
The screen displays a PCS Ready Link call message.
The other party’s PCS Ready Link number and name (if available)
are displayed.
The screen displays who has the f loor.
The status of a PCS Ready Link call:
The Green LED On indicates you have the f loor and may speak.
The Red LED On indicates another contact...