Philips Cbright Xg2 Projector User Manual

Connecting to a computer
Notes:
–The data input is suitable for both Apple Macintosh
computers (Power Book and Power Mac) as well as for 
IBM compatible PCs.
–The data output of IBM compatible PCs can be connected
directly to the projector using standard data cables.
–Apple Macintosh computers may need a conversion plug
(optional) added to the standard data cable.
–The figures in brackets (1) correspond to the figures in the
accessories diagram. 
The characters in brackets (a) correspond to the...

Connecting to video equipment
Note: The figures in brackets (1) correspond to the figures in the
accessories diagram.
The characters in brackets (a) correspond to the
characters in fig. 4 of ‘Controls and connections’. 
Caution!
Always switch off the projector before making any connections.
PAL, NTSC, SECAM
1.Connect the Video out socket of a VCR, Laser Disc player,
video camera or TV to the Video socket (e) of the projector.
For this, use the video/audio connection cable (2) supplied.2.Connect the Audio...

Connecting to Component- and HDTV-video equipment
Note: The characters in brackets(a) correspond to characters in
fig. 4 of ‘Controls and connections’.
Caution! 
Always switch off external equipment and projector before
making any connections.
1.
Connect the 15 pin connector of an optional component/HD
input cable to the Data in terminal (h)of the projector.2.Connect the other end of the cable to the appropriate
outputs of your Component- or HDTV-video equipment (e.g.
DVD player, Settop Box, HDTV...

Connecting to audio equipment
Note: The characters in brackets (a) correspond to the
characters in fig. 4 of ‘Controls and connections’. 
Caution!
Always switch off the projector before making any connections.
Always turn down the volume control of the connected amplifier
before switching it on, to prevent damage to the speakers.
•Connect the Audio in L/R sockets of an amplifier or stereo
system to the Audio out socket (a) of the projector.
For this use audio/video connection cable (2) supplied.
You can...

General1.Press the Stand by button to switch on the projector.
–The Standby indicator
lights up green and the
start up screen appears
for several seconds.
–When the average
lamplife time has almost
expired and less than 
100 hours remain, the
message ‘Warning:
lamplife has almost
expired’ will be displayed
on the screen when
switching the projector
on. For this refer to the
section ‘Lamp’ under
‘Maintenance’ 
2.Select the required source (Data, Video or S-Video) by
pressing the Source button.
Note:When...

2.Use Cursor Control left
and/or right to move the
cursor to any other item
in the menu bar.
3.Select the sub menu item
to be adjusted using
Cursor Control up and/or
down. When more items
are available than can be
shown in one screen, this
will be indicated by
‘more’ at the bottom of
the list. Press OK to
move to the next list of
items. With ‘previous’
you can go back to the
first list.
4.Adjust the selected item
in the action window at
the bottom of the screen,
using Cursor Control left and/or right....

Note: A(audio)/V(video)-mute can only be selected with the 
AV mute button on the projector or on the remote control.
A/V mute then appears on the screen. 
For example:
The following adjustments procedures follow a slightly
different sequence of actions, or may need some further
explanation.
Digital Zoom
Digital Zoom is used to enlarge a part of the picture.
1.Press Menu.
–The menu bar will appear.
Display is highlighted and its sub menu is shown.
2.Use Cursor Control to move the cursor to Digital...

Mirror
The projector can be used in various positions with respect to
the viewers and the projection screen. With the Mirror function
the picture can be displayed in a way that is suitable for your
specific application.
Front projection
Rear projection
Ceiling front projection
Ceiling rear projection
Audio Control
The projector’s sound is set to standard specifications at the
factory. However, you can adjust the sound to suit your own
preferences by using the Audio control feature.
The following...

Other Settings
The projector is equipped with the following functions to
optimize its use and handling:
Start-up screen
This function allows you to display or suppress the default
Philips start-up screen upon the projector’s start up and to select
and store a start up screen of your own choice.
1.Press Menu.
–The menu bar appears on the screen.
2.Use Cursor Control to move the cursor to Settings.3.Select Start-up screen by using Cursor Control.4.Select:Default - to display the default Philips start-up...

NOTICE:The product you have purchased contains the latest in high-
quality optical components.
Like all products equipped with an optical function - like e.g.
camera lenses, slide projectors and binoculars - these
components are sensitive to polluted environments. Small
contaminations like dust and smoke particles can easily attach to
the surfaces of the optical components, degrading the
performance and reducing the lifetime of the product.
Cleaning
Caution!
Switch off and disconnect the projector before...