Philips Cbright Xg2 Projector User Manual

							Philips multimedia projector
cBright 2 Series
User guide
English
MenuOK
AV
MuteKeystoneVo l u m eStand
byL
a
m
pR
C 
						

							2
@
MenuOK
AV
MuteKeystoneVolumeS
t
a
n
d
b
yL
a
m
pRC
@
$
0
# !
Menu OK
AV
Mute
Key s t o n e Source
Stand
 byLamp
RC Menu OK
AV
Mute
Key s t o n e Source
Stand
 byLamp
RC
2
5 1
63
8 7
9
4
il
Audio out USB Video audio-in Video S-Video Data inData out Audio out USB Video audio-in Video S-Video Data out Data in
a
k
j
beghbf
Data audio-in Data audio-in
dc
fig. 1
fig. 4
0. Controls and connections
VOLUME
OK MENU
Stand by
On 
D-ZOOM D-FREEZE SOURCEMOUSERight Left
Vo l u m e
OK MenuLaser
Stand by
On
D-Zoom D-Freeze SourceMouseRight Left2
3 1
9
6
5
4
0
!
7
8
AV MUTEAV  M u t e
@
6
VOLUME
OK MENU
MUTE
D-ZOOM D-FREEZE SOURCEMOUSERight Left
Vo l u m e
OK MenuStand by
On
 Mute
D-Zoom D-Freeze SourceMouseRight Left2
3 1
9
6
5
4
0
!
7
8AV MUTE AV  M U T EAV  M u t e
fig. 2 fig. 3 Laser pointer
remote controlCompact
remote control 
						

							Table of contents
0. Controls and connections .....................................................2
1. Introduction............................................................................3
Table of contents .....................................................................3
Introduction .............................................................................3
Packaging contents .................................................................3
2. Things You Should Know  ....................................................3
3. Important Safeguards ...........................................................4
4. Projector Features .................................................................5
5. Functional Overview ..........................................................6-7
Controls ...................................................................................6
Connections .............................................................................7
6. Set Up..................................................................................8-9
Positioning the projector and screen .......................................8
Mains supply ...........................................................................8
Adjusting the focus and size of the image ..............................8
Adjusting the vertical and horizontal angle of the projector ....8
Moving the projector ...............................................................9
Transporting the projector .......................................................9
Inserting the batteries in the remote control ..........................9
7. Installation ..................................................................... 10-14
Video/computer cables and adapter ......................................10
Connecting to a computer .....................................................11
Connecting to video equipment ............................................12
Connecting to Component- and HDTV-video equipment ......13
Connecting to audio equipment ............................................13
Connecting to an external monitor ........................................14
8. Operation ....................................................................... 15-19
Preparation .......................................................................15-16
Display and Picture control ...............................................16-18
Audio control .........................................................................18
Other settings........................................................................19
9. Maintenance .................................................................. 20-22
Cleaning .................................................................................20
Cleaning the dustfilter ...........................................................20
Lamp ......................................................................................21
Lamp replacement.................................................................21
Resetting the lamplife time ...................................................22
10. Troubleshooting...................................................................23
Introduction
Congratulations on your purchase of one of the most
sophisticated and reliable products on the market today. We are
sure that, used properly, it will bring you years of enjoyment. You
will want to keep this manual handy, as it is a convenient source
of information about your projector. For your own protection and
prolonged operation of your projector, please read the ‘Important
Safeguards’ section before use. 
Packaging contents
Please confirm that the following items are packed in the
projector box. They are provided to help you use or set up your
projector.
– Projector
– Mains lead
– Audio/Video RCA Cable
– S-Video cable Cable
– RCA/Jack adapter
– Integrated VGA/USB cable
– Scart/RCA Audio Video adapter (not for USA version)
– Remote control + batteries
– Soft bag
– User Guide, Projection Assistant and more on CD-ROM
– Quick set up Card
Note: This equipment has been tested to comply with the limits
for a class A digital device in accordance with Part 15 of
the FCC Rules as well as the European CE marking.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including
interference that may cause undesired operation.
These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in
a commercial environment.
This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
user’s guide, may cause harmful interference to radio
communications.
Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be
required to correct the interference at his own expense.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
–Reorientate or relocate the receiving antenna.
–Increase the distance between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for
help.
FCC Warning: 
To assure continued compliance, use only the provided grounded
mains supply lead and shielded interface cables when
connecting this device to a computer. Also, any unauthorized
changes or modifications to this equipment could void the user’s
authority to operate this device.
NOTE:
This Philips projector uses three LCD (Liquid Crystal Display)
panels.These panels contain a total of 1,440,000 (for SVGA
projectors) or 2,359,296 (for XGA projector) pixels. As with any
equipment, certain tolerances apply to the performance
specification of the product.
Your projector might have some inactive pixels - within
acceptable tolerances - which may result in illuminated or dark
dots on the picture screen. These inactive pixels will not affect
the overall picture quality or the life expectancy of the projector.
Important note for users in the U.S.A.
The responsible party of this multi media projector is the
following:
Philips Consumer Electronics Company
One Philips Drive
Knoxville, TN 37914
Telephone (1888) 873-4672
1. Introduction
3
2. Things You Should Know 
						

							Electrical energy can perform many useful functions. 
This projector has been engineered and manufactured to meet
applicable safety standards. IMPROPER USE CAN RESULT IN
POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARDS. In order
not to defeat the safeguards incorporated into this projector,
observe the following basic rules for its installation, use and
servicing.
1.
Unplug the projector from the wall socket before cleaning or
lamp replacement.
2.Do not use liquid cleaners or aerosol cleaners. Use a soft dry
cloth to clean the projector unit. If the unit is very dirty, wet a
cloth with neutral detergent, squeeze it tight, wipe the unit
with it, and finish by wiping with a dry cloth. 
Do not use a chemical duster or polisher-cleaner because it
can adversely affect the unit and peel the paint.
3.Do not use attachments not recommended by PHILIPS, as
they may cause hazards.
4.Do not use the projector near water- for example, near a
bathtub, washbowl, kitchen sink, or laundry tub, in a wet
basement, near a swimming pool, etc. Never spill liquid into
the projector.
5.Do not place the projector on an unstable cart, stand, or
table. The projector may fall, which may cause serious injury
to a child or an adult and/or serious damage to the unit. Use
only with a cart or stand recommended by its manufacturer
as being suitable for use with a projector.
6.Ceiling, wall or shelf mounting should be done with a
mounting kit approved by the manufacturer for use with a
projector and should follow the manufacturer’s instructions.
7.Projector equipment and cart combinations should be moved
with care. Quick stops, excessive force, and uneven surfaces
may cause the equipment and cart combination to overturn.
8.Slots and openings of the cabinet are provided for ventilation.
To ensure reliable operation of the projector and to protect it
from overheating, these openings must not be blocked or
covered. These openings should never be covered with cloth
or other material. The bottom opening should not be blocked
by placing the projector on a bed, sofa, rug, or other similar
surface. The projector should not be placed near or over a
radiator or heating vent. The projector should not be placed in
a built-in installation such as a bookcase unless proper
ventilation is provided.
9.The projector should be operated only from the type of mains
source indicated on the side of the projector or in the
specifications and with the appropriate mains lead. If you are
not sure of the type of mains supplied to your business or
the right type of mains lead, consult your projector dealer or
local power company.
10.Do not allow anything to rest on the mains lead. Do not place
the projector where the lead will be walked on.
11.Follow all warnings and instructions marked on the projector.12.As a safety feature, this projector is equipped with mains
lead with a 3-pin grounded plug (for USA-versions only) or a
2-pin grounded plug (for European versions only). The 3-pin/2-
pin grounded plug will fit only into a grounding type mains
outlet. If the plug does not fit, use an adapter that is properly
grounded or have an electrician install a grounded type
outlet. Do not attempt to modify this AC plug.
13.For added protection of the projector during a lightning
storm, or when it is left unattended or not in use for long
periods of time, unplug it from the wall socket and
disconnect any cable systems. This will prevent damage to
the projector due to lightning and power-line surges.
14.Do not overload wall sockets and extension leads with too
many products, because this can cause a fire or electric
shock.
15.Never push objects of any kind into the projector through
cabinet slots as they may touch dangerous voltage points or
short cut parts, which could result in a fire or electric shock.
16.Do not attempt to service the projector yourself other than
maintenance issues presented in chapter ‘Maintenance’.
Opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified
service personnel.
17.Unplug the projector from the wall socket and refer servicing
to qualified service personnel under the following conditions:
A.When the mains lead or plug is damaged or frayed.B.If liquid has been spilled into the projector.C.If the projector has been exposed to rain or water.D.If the projector does not operate normally when you
follow the operating instructions. Adjust only those 
controls that are covered by the operating instructions;
improper adjustment of other controls may cause
damage and will often require extensive work by a
qualified technician to restore the projector to normal
operation.
E.If the projector has been dropped or the cabinet has
been damaged.
F.When the projector exhibits a distinct change in
performance – (this indicates a need for service).
18.Upon completion of any service or repairs to the projector,
ask the service technician to perform a routine safety check
to check that the projector is in safe operating condition.
19.When replacement parts are required, be sure the service
technician has used replacement parts specified by the
manufacturer that have the same characteristics as the
original parts. Unauthorized substitutions may result in fire,
electric shock, or other hazards.
20.It is recommended to clean the air filter after every 100 lamp
hours. The projector may become too hot if the filter is not
cleaned when required.
21.If the lens becomes dirty or smudged, clean it with a clean,
dampened cloth. Never touch the lens with your fingers.
22.Do not look directly into the aperture and lens while
operating the projector as this may damage your eyes.
23.Please allow cool down of the projector for a few minutes
before switching off the mains.
24.Please dispose of batteries and lamp in special chemical
disposal bins.
25.The remote control with laser pointer sends a laser beam to
indicate items on the screen. Do not look into this beam!
CAUTION- Use of controls or adjustments or performance of
procedures other than those specified herin may
result in hazardous radiation exposure.
Wavelength: 645-660 nm
Max output: < 1 mw
IEC60825-1: 1993 + A1: 1997
LASER RADIATION
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
SCAUTION: Please read all of these instructions
before you operate your projector.
Save these instructions for future
reference.
3. Important Safeguards
4 
						

							1. Keystone Correction
A keystoned image (picture top width larger than picture
bottom width or vice versa) appears when the relative
positions of the projector and the screen are not correct.
With the ‘Keystone correction’ feature you can correct this
picture distortion. Digital keystone correction is directly
accessible via the keyboard on the projector or via the
‘Settings’ menu of the On Screen Display menu.
2. Auto setup functionality
Auto Standby
The ‘Auto Standby’ feature automatically switches the
projector to standby when no signal inputs are detected for
30 minutes. This setting can be changed in the ‘Settings’
menu.
Auto Image
The ‘Auto Image’ feature automatically sizes and positions
the image, to optimally fit the screen picture. It is applicable
for data input only and accessible in the ‘Display’ menu of
the On Screen Display menu. Manual settings of Horizontal
Size, Shift and Phase remain possible by switching Auto
Image off. The projector is fully PC and MAC compatible.
3. USB
The USB (Universal Serial Bus) connector allows you to
connect to computers equipped with a USB interface,
resulting in real hot plug and play presentation.
Mouse control:By connecting USB, the mouse function on the Remote
Control automatically gets installed. You can now manipulate
the mouse cursor on the computer and on the screen, using
Cursor Control.
Audio:Audio information from the computer will be heard via the
projector speaker.
External control and feedback via the USB port (PC only)The ‘Projector Max’ application, supplied on the CD-ROM,
allows operation of certain projector features and settings via
your PC. Once installed the application communicates with
the projector via the USB port and runs on MS-Windows
operating systems.
For installing the application see the ‘Projector Max’ user
guide on the CD-ROM.
Note: Based on the specific hardware and software
configuration available, Apple Macintosh computer
users could experience incomplete or erratic
USB -functionality. These problems are not related to
the performance of your projector.
4. Digital features
The digital features of the projector are of great value for an
attractive presentation. With ‘Digital Zoom’ a specific part of
the projected image can be enlarged. The ‘digital freeze’
feature enables you to capture moving pictures (still picture).
5. Very easy to install and operate
The OSD (On Screen Display) information screens and
menus in 7 languages provide you with additional information
to help you make the right choices about installation and
operation, and to perform the correct actions.
The standard OSD language is English. In addition you can
select French, Spanish, German, Italian, Portuguese and
Chinese.
The sensor of the wireless remote control allows you to
operate both your computer as well as your projector from
almost anywhere in the room. The directional shuttleon
the projector and on the remote controlfunction as Cursor
Controland are used to manipulate the mouse cursor on the
connected computer, as long as the menu is not active.
When the menu is active, the Cursor Control controls the
menu cursor.
The local keyboard provides direct access keys for those
functions that are most often used during set-up of the
projector. The remote control provides keys for those
functions that are most often used during presentations. For
a complete overview of keyboard and remote control keys,
see the Functional Overview in the next paragraph.
6. External monitor connection
A separate external monitor (or a second projector) can be
connected to the projector, The image projected is
simultaneously shown on the monitor, even when the
projector is in power standby mode.
7. High reliability and excellent brightness
The Philips UHP lamp guarantees long life, excellent
brightness over the lamp’s lifetime and excellent colour
reproduction.
Furthermore, the projector has an excellent brightness- and
colour uniformity over the entire picture.
8. Excellent video quality
The projector accepts the input signal of all major video
formats, including PAL, SECAM, NTSC, S-Video, HDTV and
Component video signals. The projector will recognize these
standards and adapt to them automatically. With the ‘picture
format’ feature you can select one of three picture format
options 4:3, 16:9 or 16:9 enlarged.
9. Stereo Audio Output 
A standard 3.5 mm audio plug is available for connecting
external audio equipment via a standard 3.5 mm stereo plug.
Constant (‘Line’) or variable (‘Regulated’) audio output
volume can be selected in the ‘Audio’ menu.
10. Adjustable Screen Capability
The diagonal picture size of the display can be set from 
21 (0.53 m) to 262 (6.6 m).
For more information on the projection properties of the
projector, please check the ‘Projector Assistant’ programme
on the CD-ROM.
11. Ceiling Mount and Rear Screen projection
The projector is equipped with a full mirror scan conversion
function (‘vertical/horizontal mirror’), which allows the image
to be reversed for ceiling mount as well as for rear projection
applications.
4. Projector Features
5 
						

							Controls
On projector (fig. 1)
1Menu
To activate and deactivate the menu.
2Cursor Control
To manipulate the mouse cursor on the connected computer
as long as the menu is not active. When the menu is active
the Cursor Control controls the menu cursor. The cursor
control works with up/down and left/right button operation.
Note: The Cursor Control can only function as a mouse
cursor when the USB socket of the projector is
connected to the USB downstream terminal of the
computer.
3A(udio)/V(ideo)Mute
To mute the sound of the projector (or an externally
connected sound amplifier) and to mute the picture.
4Standby
To switch the projector in or out of the power standby mode.
When the projector is in standby mode, the ring around the
button lights up red. When the projector is operating, the ring
is green. When the projector receives a signal from the
remote control the ring is fast blinking green/red.
5OK
To confirm actions in the menu when the menu is on screen.
6Source
To select the current projection source (Data, S-Video or
Video). The button toggles between the three signals.
7Keystone 
To correct picture distortion of the vertical keystone type by
digital scaling.
8Lamp indicator
– Lights up green when the lamp is on.
– Lights up orange when lamp life has almost expired.
– Lights up red when lamp life has expired.
– Fast blinks red when lamp start has failed.
– Slowly blinks green/red/orange when the lamp is starting.
up or cooling down.
9Temperature indicator
– Lights up red in case of temperature error.
– Flashes in case of fan error.
0Zoomring
To adjust the size of the projected image.
!Focus ring
To adjust the focus of the projected image.
@Height/Level adjusters
To adjust the vertical and/or horizontal angle of the projector.
#Lens cap
To protect the lens when the projector is not in use.
$IR sensor
To receive the signals from the remote control.
On laser pointer remote control (fig. 2)
1Laser
To activate the laser pointer to indicate items on the screen. 
Note:The laser pointer sends out a laser beam. Do not look
into this beam!
2Mouse Left/Right
Function as the Left and Right mouse keys of your PC.
3– Volume +
To adjust the volume.
4Menu
To activate and de-activating the menu.
5A(udio)/V(ideo)Mute
To mute the sound of the projector (or an externally
connected sound amplifier) and to mute the picture.
6Source
To select the current projection source (Data, S-Video or
Video). The button toggles between the three signals.
7D(igital)-Freeze
To capture a moving picture. The button toggles between the
Freeze mode and the display situation.
8D(igital)-Zoom
To switch the Digital Zoom function ‘On’ or ‘Off’ (toggle
button). In ‘On’ condition, the zoom centre can be selected
using Cursor Control and the image is magnified with the
zoom factor chosen under Magnification.
9Stand by On
To switch the projector in or out the the power standby
mode.
0Cursor Control
To manipulate the mouse cursor on the connected computer
as long as the menu is not active. When the menu is active
the Cursor Control controls the menu cursor. The cursor
control works with up/down and left/right button operation.
Note: The Cursor Control can only function as a mouse
cursor when the USB plug of the projector is
connected to the USB downstream terminal of the
computer.
!OK 
To confirm actions in the menu when the menu is on screen.
@Laser pointer
Exit point of laser pointer.
5. Functional Overview
6
See illustrations 
						

							On compact remote control (fig. 3)
1Stand by On
To switch the projector in or out the the power standby
mode.
2Mouse Left/Right
Function as the Left and Right mouse keys of your PC.
3– Vo l u m e  +
To adjust the volume.
4Menu
To activate and de-activating the menu.
5Mute
To mute the sound of the projector.
6Source
To select the current projection source (Data, S-Video or
Video). The button toggles between the three signals.
7D(igital)-Freeze
To capture a moving picture. The button toggles between the
Freeze mode and the display situation.
8D(igital)-Zoom
To switch the Digital Zoom function ‘On’ or ‘Off’ (toggle
button). In ‘On’ condition, the zoom centre can be selected
using Cursor Control and the image is magnified with the
zoom factor chosen under Magnification.
9A(udio)/V(ideo)Mute
To mute the sound of the projector (or an externally
connected sound amplifier) and to mute the picture.
0Cursor Control
To manipulate the mouse cursor on the connected computer
as long as the menu is not active. When the menu is active
the Cursor Control controls the menu cursor. The cursor
control works with up/down and left/right button operation.
Note: The Cursor Control can only function as a mouse
cursor when the USB socket of the projector is
connected to the USB downstream terminal of the
computer.
!OK 
To confirm actions in the menu when the menu is on screen.
Connections (fig. 4)
Data source connections
a Audio out
Output socket to connect to the Line Input sockets of an
amplifier or stereo system.
b USB
(upstream)
Input socket to connect a PC or Apple Macintosh computer
equipped with a USB downlink connection.
d Data audio in
Input socket to connect to the Audio out terminal of a
computer or Component video source.
h Data in
Input socket to connect to the Data out terminal of a
computer.
Video source connections
a Audio out
Output socket to connect to the Line Input sockets of an
amplifier or stereo system.
c Video audio in
Input socket to connect to the Audio out sockets of a video
recorder (S-VHS, PAL, NTSC, SECAM).
e Video
Input socket to connect to the Video out socket of a video
recorder, Laser Disc player, video camera or TV with AV
output socket (PAL, NTSC, SECAM).
f S-Video
Input socket to connect to the S-Video out socket of a S-VHS
video recorder, a VCR, Laser Disc player, video camera or TV
with AV output socket.
Other connections
g Data out
To connect to an external monitor (or a second projector).
The image projected is simultaneously shown on the
monitor.
i Lamp compartment
j Lock slit
To insert an optional locking device (Kensington lock).
k Power
To connect the projector to the mains.
l Dust filter
5. Functional Overview
7
See illustrations 
						

							Positioning the projector and screen
•Place the projector on a stable, level surface, out of direct
sunlight and away from sources of excessive dust, dirt, heat,
water, moisture, vibration and strong magnetic fields.
•Allow sufficient cooling of the product by keeping all air inlets
and outlets clear from obstructions.
•Take additional measures to protect the product when
operating (or storing) it in unclean or smoky environments like
e.g. bars, casinos, production environments, arcade game
centres, etc.
•Face the projector towards the screen for the best picture
results. To determine the distance for the desired size, please
refer to the Projection Assistant, a calculation programme
included on the CD-ROM.
•The screen should be positioned so that it is not directly
touched by sunlight or artificial light, as this will wash out the
colours of the picture, making it hard to see.
•The projector can be used for both front projection, rear
projection and ceiling projection applications. As default factory
setting, the projector has been set up for front projection. You
can change to rear or ceiling projection via the OSD menu. See
‘Rear screen projection’ and ‘Ceiling-mount projection’ under
‘Operation - Display and picture control’ for further instructions.
•Choose a screen size suitable for the number of viewers and
the size of the room.
•Picture quality is best when you sit directly in front of the
projector screen.
Important!
Negligence in observing the install recommendations above could
infringe the warranty conditions for this product.
Mains supply
1.Insert the mains lead into the projectors Power socket and
connect it to the wall socket.
Note: The standby indicator lights up red, the projector is now in
the Power/Standby mode.
2.
Remove the lens cap.3.Press the Stand by
button to switch on the
projector.
–The Standby indicator
lights up green.
–When the projection lamp
is on, the start-up screen
appears for several
seconds.
4.Press the Stand by
button again to switch
the projector back into
the power standby mode.
–The Standby Warning
screen will appear for
20 seconds.
5.Press the Standby button
again to confirm.
Note: The Stand by Warning screen can be removed by pressing
the OK button.
6.
To switch off the mains supply completely, disconnect the
mains lead.
Notes:
– Save energy! Please put the projector in the Standby position
if you are not going to use the projector for more than 15
minutes.
– When no signal inputs are detected for 30 minutes, the
projector automatically switches to standby. This setting can
be changed in the ‘Settings’ menu.
– Before disconnecting the mains lead, make sure that the
cooling fan has stopped (about 3 minutes after the projector
has been switched to Power Standby).
Adjusting the focus and size of the image
•Use the Zoom ring to adjust the size of the image.
•Use the Focus ring to adjust the focus of the image.
Adjusting the vertical and horizontal angle of the projector
Vertical angle
•Use the Height/Level Adjusters to adjust the vertical angle of
the projector as specified under ‘Positioning the projector and
screen’.
AA
B
B
M
e
n
uO
K
A
V
M
u
t
eK
e
y
s
t
o
n
eVolumeStand
byL
a
m
pR
C
Focus ring
Zoom ring


Warning







If the projector is switched off you have to wait

1 minute before you can switch on the projector 

again.





















Press stand-by key again to confirm.

Press OK key to remove this warning.
PHILIPS PHILIPS
PHILIPS
Multimedia Projectors
Multimedia Projectors
M
e
n
uOK
AV
MuteKeystoneVolumeStand
byLampRC
6. Set Up
8 
						

							To Raise:
•Keep both adjusters (A) pressed and lift to raise the projector.
–The projector feet (B) will come out.
To Lower:
•Keep both adjusters (A) pressed and gently lower the
projector.
•Use the Focus Ring and Zoom Ring to readjust the focus and
size of the image.
Horizontal angle (horizon)
•Adjust or correct a possible tilted picture by turning the
projector feet to the desired position.
Up: turn the feet to the left.
Down: turn the feet to the right.
•Use the Focus Ring and Zoom Ring to readjust the focus and
size of the image.
Keystone correction
If projector and screen are not properly placed, the picture will be
distorted, producing a keystone image. 
Keystone correction allows you to correct
picture distortion of the vertical keystone type
by internal scaling.
•Use the Keystone  button to widen the image.
•Use the  Keystone button to narrow the image.
•This correction function also is accessible through the
‘Keystone Correction’ option in the ‘Settings’ menu of the On
Screen Display (OSD) menu.
Moving the projector
1.Press the Stand by On button to put the projector in stand by.
The standby indicator lights up red.
2.Wait until the cooling fan has stopped (about 3 minutes after
the projector has been switched off) and disconnect the mains
lead and all other cables.
3.Put the lens cap back in place to prevent dust, dirt or other
contamination from harming or damaging the front of the
projector lens when moving the projector.
Note: Never place the projector on the side where the
connections are located.
Transporting the projector
The projector contains many glass and precision parts. If you need
to transport the projector, please follow these packing instructions
to pervent accidental damage to the projector.
•When transporting the projector for repair, use the original
packaging material if possible. If you do not have the original
packaging, use equivalent materials, placing plenty of
cushioning around the projector.
•When transporting the projector as freight or checked luggage,
first put it in a carrying case (such as the soft bag supplied),
then pack it in a firm box, using cushioning around the case.
•When you are hand-carrying the projector, be sure to use a
carrying case (such as the soft bag supplied).
Inserting the batteries in the remote control
1.Push and slide the lid in the direction of the arrow.2.Install two ‘AAA’ batteries as indicated inside the battery
compartment.
3.Replace the lid and snap it into place.
Note: The maximum range of the remote control is approximately
15 m (± 50 feet).
Push
M
e
n
uOK
AV
MuteKeystoneVolumeStand
byLampRC
Keystoned Image
6. Set Up
9 
						

							Video/computer cables and adapter
These accessories (1 to 5) are supplied with the product for
connecting the projector to computer/AV equipment. 
The numbers in the left-hand column correspond with the
numbers in the connection diagrams on the following pages.
Optional accessories:
• LCA3111/00 – 200 W replacement lamp;
• LCA4117/00 – trackerball remote control;
• LCA4119/00 – RS-232 mouse receiver;
• LCA2210/00 – ceiling mount;
• LCA5300/00 – VGA extension cable (15 m);
• LCA5311/00 – component/HD input cable
(5 x RCA to 15p D-sub);
• LCA5312/00 – SCART/RCA adapter (SCART to 4 x RCA);
• LCA9000/20 – Easy Pad;
• Programmable VGA/MAC adapter (available via your support
centre as item 4822 263 2120 1)
7. Installation
10
CONNECTORS
Computer/AV product side Projector side
Integrated VGA/USB CableCABLE/ADAPTER
Mini D-Sub 
15P (male)
Stereo audio plug
(male) x 1Mini D-Sub 
15P (male)
RCA pin
(male) x 3
3RCA Audio Video Cable 1
2
Scart/RCA-AV Adapter
USB connector
4P (male) USB connector
4P (male)
(depending on region)
4 S-Video cable
Mini Din
(male) x 4Mini Din
(male) x 4
5 RCA/Jack adapter
No.
RCA pin
(male) x 1
Video/computer cables and adapter