Plus He 3200 Projector User Manual

E – 41
On-Screen Display Settings [Option]
These settings are for the menu and language that will be displayed on the screen.
See → Page E-28 Using the On-Screen Menu for information about performing
menu operations.
Picture1
LanguageEn  De  Fr  It  Es
- Menu Position -
Duration 10 sec.Picture2 Setup Info.VIDEO
OptionPreparation
Press the MENU button to display the menu, then select [Option].
Language
On-Screen Display Language Settings
This is the setting of the language that is displayed on
screen when...

E – 42
Resetting, Storing, and Information [Info.]
This function performs resetting and the display of information for the method of
using the user memory, the default values of adjustments and settings, and the
lamp timer.
See → Page E-28 Using the On-Screen Menu for information about performing
menu operations.
Picture1
User MemorySaveLoad
- Default -
- Lamp Timer Reset -
Status :   100 . 500
Lamp Timer: 1 hrs      (Total         1 hrs)Picture2 SetupInfo. OptionVIDEO
Preparation
Press the MENU button...

E – 43
Resetting, Storing, and Information [Info.]
Default
Returning to Standard Settings
This function is used to return the adjustments and
settings of the current signal to the standard settings.
Select the signal you wish to return to the default set-
tings first before doing so.
Press the cursor () button and align the cursor with
[Default], then press the SET button.
The message display will change to: Press Set to
Reset Menu.
Press the SET button while the message is displayed.
This results in a...

E – 44
Troubleshooting
Check the following matters before requesting servicing.
* Has the power plug become disconnected from the outlet?
* Is the lamp cover properly attached?
* Has the internal temperature become high? When the internal temperature becomes
very high, to protect the unit the power will not switch on.
* Has the lamp timer exceeded 1,100 hours? The power will no longer switch on once
the timer has exceeded 1,100 hours.
* Has the connected input been selected?
* Is the cable of the input...

E – 45
When the STATUS Indicator Is Lit/Flashes
* It is time to replace the lamp. Replace with a new lamp.
* Is the lamp cover attached properly? If not, attach it properly.
* The thermal protector has been activated. If the room temperature is high,
move the projector to a cool location. If the internal temperature of the projec-
tor is high, check the cooling fan ventilation holes and clean them if they are
obstructed.
* The thermal protector has been activated. If the room temperature is high,
move...

E – 46
Replacing the Lamp Cartridge
NOTE: The projector lamp has its usable life.
The rated lamp life is about 1000 hours. How-
ever, it may become shorter depending on the
conditions of usage.
(The rated lamp life is the average life of the
lamps produced and tested, under the test con-
ditions of our company, for a long term.)
After the lamp has been operating for 1000 hours or longer, the STATUS indicator
will light and the message Replace The Lamp will appear on the screen. Also,
when 1,100 hours is...

E – 47
3
Install the new lamp cartridge.
qInstall the new lamp cartridge in the direction as shown
in the drawing.
Plug
4
Reinstall the lamp cover.
qInsert the lamp cover until the catches fit in the grooves.
wTighten the lamp cover screw. wTighten the lamp cartridge screw.
(Put down the handle of the lamp cartridge.)
Groove
5
Reset the lamp usage hours to zero.
From the menu, select [Info.] → [Lamp Timer Reset] and then reset the lamp usage hours.
See Resetting the Lamp Timer on page E-43.
NOTE: When...

E – 48
Cleaning a Soiled Projector Main Unit
* Wipe with a lint-free, soft, dry cloth.
When very dirty, wipe with a cloth that has been moistened with a diluted neutral detergent, then finish with a dry cloth. If a
chemically-treated cloth is going to be used, please follow any written warnings.
* Do not wipe with thinner, benzene, or other solvents. Doing so could cause them to undergo qualitative changes or the coatings
may peel, etc.
* When removing the dust of the outflow and intake holes, use the...

E – 49
Table of Supported Frequencies
This projector automatically identifies the input signal from the personal computer and selects the optimum supported resolution
from the table below. Note that a manual adjustment may be required depending on the input signal. Please see Adjusting the
Clock Frequency of the Input Signal and Adjusting the Phase of the Input Signal on Page E-35.
Signal Resolution Frequency Support
Horizontal(kHz)Vertical(Hz) Analog Digital
VESA 640 x 350 31.5 70.1–
640 x 350 37.9...

E – 50
Specifications
Model Name HE-3200
Display Method Single Chip Digital Micromirror Device (DMDTM)
DMD Panel 0.7
508,800 pixels (848600)
Lens Manual zoom, Manual focus
F=3.0–3.3 f=21.5–25.8mm
Lamp 130W High Performance Compact Lamp
Image Size Min. 32 (Throw distance 1.2m / 3.9 feet : Tele)  Max. 200 (Throw distance 6.4m / 20.9 feet : Wide)
Color Reproduction Full color, 16.7 million colors simultaneously
Light Output 450 ANSI lumens (normally white)
Contrast Ratio 700:1 (Full on/off)
Scanning...