Home > Proxima > Projector > Proxima Dp6150 Projector User Manual

Proxima Dp6150 Projector User Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Proxima Dp6150 Projector User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 100 Proxima manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							FCC STATEMENT
    31
    This equipment complies with the limits for a Class A computing device, pursuant to Subpart J of Part 15 of FCC rules. Only peripherals (computer 
    input/output devices, terminals, printers, etc.)  certified to comply with the Class A limits may be attached to a computer that complies with Class A limits.
    When connecting to a peripheral device, a shielded input/output cable is required to ensure compliance with FCC rules. The shielded cable that must be used is supplied
    with the equipment. Operation with non-certified peripherals or non-shielded cables is likely to result in interference to radio and TV reception.
    This equipment generates and uses radio-frequency energy and, if not installed and used in accordance with the instruction manual, may cause interference to radio and
    television reception. It has been tested and found to comply with the limits for a Class A computing device in accordance with the specifications in Subpart J of Part 15 of
    the FCC rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment. However, there is no 
    guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or television reception, which can be determined by
    turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 
    • Reorient the receiving antenna.
    • Relocate the projector with respect to the receiver.
    • Plug the equipment to a different outlet so that equipment 
    and receiver are on different branch circuits.
    • Fasten cables using mounting screws to ensure adequate EMI control.
    You may require the following booklet from the Federal Communications Commission (FCC): "How to identify and resolve radio and TV interference problems", available
    from the U.S. Government Printing Office, Washington, DC 20402, Stock No. 004-000-00345-4. 
    O 
    						
    							32Using the Display
    3Under Pick a task..., click the area you want to change, or under or pick a Control Panel icon, click Display.
    4Try different settings for Color quality and Screen resolution. 
     NOTE: As the resolution increases, icons and text appear smaller on the screen. 
    						
    							Using the Keyboard and Touch Pad33
    Using the Keyboard and Touch Pad
    Numeric Keypad
    The numeric keypad functions like the numeric keypad on an external keyboard. Each key on the 
    keypad has multiple functions. The keypad numbers and symbols are marked in blue on the right of 
    the keypad keys. To type a number or symbol, press  and the desired key after enabling the 
    keypad.
     To enable the keypad, press . The  light indicates that the keypad is active.
     To disable the keypad, press  again. 
    1numeric keypad
    1
    9 
    						
    							34Using the Keyboard and Touch Pad
    Key Combinations
    System Functions
    Battery
    CD or DVD Tray
    Display Functions
    Radios (Including Wireless Networking and an Internal Card With 
    Bluetooth
    ®Wireless Technology)
    Power Management
     Opens the Task Manager window.
     Displays the Dell™ QuickSet Battery Meter. This feature 
    is not supported in Dell MediaDirect. For more 
    information, see Dell™ QuickSet Battery Meter on 
    page 38. 
     Ejects the tray out of the drive (if Dell QuickSet is 
    installed). This feature is not supported in Dell 
    MediaDirect. For more information on QuickSet, see 
    Dell™ QuickSet Features on page 131.
     Switches the video image to the next display option. The 
    options include the integrated display, an external 
    monitor, and both displays simultaneously.
     and up-arrow key Increases brightness on the integrated display only (not 
    on an external monitor).
     and down-arrow 
    keyDecreases brightness on the integrated display only (not 
    on an external monitor).
     Enables and disables radios, including wireless 
    networking and Bluetooth wireless technology.
     Activates a power management mode. You can 
    reprogram this keyboard shortcut to activate a different 
    power management mode using the Advanced tab in the 
    Power Options Properties window. See Power 
    Management Modes on page 39. 
    						
    							Using the Keyboard and Touch Pad35
    Speaker Functions
    Microsoft
    ® Windows® Logo Key Functions
    To adjust keyboard operation, such as the character repeat rate, open the Control Panel, click Printers 
    and Other Hardware, and click Keyboard. For information about the Control Panel, see the Windows 
    Help and Support Center. To access the Help and Support Center, see page 13. 
     Increases the volume of the integrated speakers and 
    external speakers, if attached.
     Decreases the volume of the integrated speakers and 
    external speakers, if attached.
     Enables and disables the integrated speakers and external 
    speakers, if attached.
    Windows logo key and 
    Minimizes all open windows.
    Windows logo key and 
    Maximizes all windows.
    Windows logo key and  Runs Windows Explorer. This opens the same 
    window as double-clicking My Computer on your 
    desktop. 
    Windows logo key and  Opens the Run dialog box.
    Windows logo key and  Opens the Search Results dialog box.
    Windows logo key and 
    Opens the Search Results-Computer dialog box 
    (if the computer is connected to a network).
    Windows logo key and 
    Opens the System Properties dialog box. 
    						
    							36Using the Keyboard and Touch Pad
    Touch Pad
    The touch pad detects the pressure and movement of your finger to allow you to move the cursor on the 
    display. Use the touch pad and touch pad buttons as you would use a mouse.
     To move the cursor, lightly slide your finger over the touch pad.
     To select an object, lightly tap once on the surface of the touch pad or use your thumb to press the left 
    touch-pad button.
     To select and move (or drag) an object, position the cursor on the object and tap twice on the touch 
    pad. On the second tap, leave your finger on the touch pad and move the selected object by sliding 
    your finger over the surface. 
     To double-click an object, position the cursor on the object and tap twice on the touch pad or use your 
    thumb to press the left touch-pad button twice.
    Customizing the Touch Pad
    You can use the Mouse Properties window to disable the touch pad or adjust their settings.
    1
    Open the Control Panel, click Printers and Other Hardware, and then click Mouse. For information 
    about the Control Panel, see the Windows Help and Support Center. To access the Help and Support 
    Center, see page 13. 
    2In the Mouse Properties window, click the Touch Pad tab to adjust touch pad settings. 
    3Click OK to save the settings and close the window.
    1touch pad
    1 
    						
    							Using a Battery37
    Using a Battery
    Battery Performance
     NOTE: For information about the Dell warranty for your computer, see the Product Information Guide or 
    separate paper warranty document that shipped with your computer.
    For optimal computer performance and to help preserve BIOS settings, operate your Dell™ portable 
    computer with the battery installed at all times. One battery is supplied as standard equipment in 
    the battery bay.
     NOTE: Because the battery may not be fully charged, use the AC adapter to connect your new computer to an 
    electrical outlet the first time you use the computer. For best results, operate the computer with the AC 
    adapter until the battery is fully charged. To view battery charge status, access the Control Panel, click Power 
    Options, and then click the Power Meter tab.
     
    NOTE: Battery operating time (the time the battery can hold a charge) decreases over time. Depending on 
    how often the battery is used and the conditions under which it is used, you may need to purchase a new 
    battery during the life of your computer.
    Battery operating time varies depending on operating conditions. Operating time is significantly 
    reduced when you perform operations including, but not limited to, the following:
     Using optical drives
     Using wireless communications devices, ExpressCards, media memory cards, or USB devices
     Using high-brightness display settings, 3D screen savers, or other power-intensive programs such 
    as 3D games
     Running the computer in maximum performance mode (See Configuring Power Management 
    Settings on page 41.)
     NOTE: It is recommended that you connect your computer to an electrical outlet when writing to a CD or DVD.
    You can check the battery charge (see Checking the Battery Charge on page 38) before you insert 
    the battery into the computer. You can also set power management options to alert you when the 
    battery charge is low. See Configuring Power Management Settings on page 41 for information 
    about accessing QuickSet or the Power Options Properties window.
     CAUTION: Using an incompatible battery may increase the risk of fire or explosion. Replace the battery 
    only with a compatible battery purchased from Dell. The battery is designed to work with your Dell 
    computer. Do not use a battery from other computers with your computer.  
    						
    							38Using a Battery
     CAUTION: Do not dispose of batteries with household waste. When your battery no longer holds a charge, call 
    your local waste disposal or environmental agency for advice on disposing of a lithium-ion battery. See Battery 
    Disposal in the Product Information Guide.
     
    CAUTION: Misuse of the battery may increase the risk of fire or chemical burn. Do not puncture, incinerate, 
    disassemble, or expose the battery to temperatures above 65°C (149°F). Keep the battery away from children. 
    Handle damaged or leaking batteries with extreme care. Damaged batteries may leak and cause personal injury 
    or equipment damage. 
    Checking the Battery Charge
    The Dell QuickSet Battery Meter, the Microsoft® Windows® Power Meter window and   icon, the 
    battery charge gauge and health gauge, and the low-battery warning provide information on the battery 
    charge.
    Dell™ QuickSet Battery Meter
    If Dell QuickSet is installed, press  to display the QuickSet Battery Meter. The Battery 
    Meter displays status, charge level, and charge completion time for the battery in your computer. For 
    information about QuickSet, right-click the  icon in the taskbar, and click Help. 
    Microsoft® Windows® Power Meter
    The Windows Power Meter indicates the remaining battery charge. To check the Power Meter, double-
    click the   icon on the taskbar. For instructions on accessing more information about the Power Meter, 
    see Configuring Power Management Settings on page 41.
    If the computer is connected to an electrical outlet, a   icon appears.
    Charge Gauge
    By either pressing once or pressing and holding the status button on the charge gauge on the battery, you 
    can check:
     Battery charge (check by pressing and releasing the status button)
     Battery health (check by pressing and 
    holding the status button)
    The battery operating time is largely determined by the number of times it is charged. After hundreds of 
    charge and discharge cycles, batteries lose some charge capacity—or battery health. That is, a battery can 
    show a status of charged but maintain a reduced charge capacity (health). 
    Check the Battery Charge
    To check the battery charge, press and release the status button on the battery charge gauge to illuminate 
    the charge-level lights. Each light represents approximately 20 percent of the total battery charge. For 
    example, if four of the lights are on, the battery has 80 percent of its charge remaining. If no lights 
    appear, the battery has no charge. 
    						
    							Using a Battery39
    Check the Battery Health
     NOTE: You can check battery health in one of two ways: by using the charge gauge on the battery as described 
    below or by using the Battery Meter in Dell QuickSet. For information about QuickSet, right-click the   icon in 
    the taskbar, and click Help.
    To check the battery health using the charge gauge, press and hold the status button on the battery 
    charge gauge for at least 3 seconds. If no lights appear, the battery is in good condition, and more than 
    80 percent of its original charge capacity remains. Each light represents incremental degradation. If five 
    lights appear, less than 60 percent of the charge capacity remains, and you should consider replacing the 
    battery. See Specifications on page 157 for more information about the battery operating time.
    Low-Battery Warning
     NOTICE: To avoid losing or corrupting data, save your work immediately after a low-battery warning, and then 
    connect the computer to an electrical outlet. If the battery runs completely out of power, hibernate mode begins 
    automatically.
    By default, a pop-up window warns you when the battery charge is approximately 90 percent depleted. 
    You can change the settings for the battery alarms. See Configuring Power Management Settings on 
    page 41 for information about accessing QuickSet or the Power Options Properties window.
    Conserving Battery Power
    Perform the following actions to conserve battery power:
     Connect the computer to an electrical outlet when possible because battery life is largely determined 
    by the number of times the battery is used and recharged.
     Place the computer in standby mode or hibernate mode when you leave the computer unattended for 
    long periods of time. See Power Management Modes on page 39 for more information about standby 
    and hibernate modes.
     Use the Power Management Wizard
     to select options to optimize your computer’s power usage. These 
    options can also be set to change when you press the power button, close the display, or press 
    . See Configuring Power Management Settings on page 41 for more information on 
    using the Power Management Wizard.
     NOTE: See Battery Performance on page 37 for more information on conserving battery power.
    Power Management Modes
    Standby Mode
    Standby mode conserves power by turning off the display and the hard drive after a predetermined 
    period of inactivity (a time-out). When the computer exits standby mode, it returns to the same 
    operating state it was in before entering standby mode.
     NOTICE: If your computer loses AC and battery power while in standby mode, it may lose data. 
    						
    							40Using a Battery
    To enter standby mode:
     Click the Start button, click Turn off computer, and then click Stand by.
    or
     Depending on how you set the power management options on the 
    Advanced tab (see Configuring 
    Power Management Settings on page 41) in the 
    Power Options Properties window, use one of the 
    following methods:
    – Press the power button.
    – Close the display.
    – Press .
    To exit standby mode, press the power button or open the display depending on how you set the options 
    on the Advanced tab. You cannot make the computer exit standby mode by pressing a key or touching 
    the touch pad.
    Hibernate Mode
    Hibernate mode conserves power by copying system data to a reserved area on the hard drive and then 
    completely turning off the computer. When the computer exits hibernate mode, it returns to the same 
    operating state it was in before entering hibernate mode.
     NOTICE: You cannot remove devices or undock your computer while your computer is in hibernate mode.
    Your computer enters hibernate mode if the battery charge level becomes critically low.
    To manually enter hibernate mode:
    Click the Start button, click Turn off computer, press and hold , and then click Hibernate.
    or
     Depending on how you set the power management options on the 
    Advanced tab in the Power Options 
    Properties
     window, use one of the following methods to enter hibernate mode:
    – Press the power button.
    – Close the display.
    – Press .
     NOTE: Some ExpressCards may not operate correctly after the computer exits hibernate mode. Remove and 
    reinsert the card (see Removing an ExpressCard or Blank on page 66), or simply restart (reboot) your computer.
    To exit hibernate mode, press the power button. The computer may take a short time to exit hibernate 
    mode. You cannot make the computer exit hibernate mode by pressing a key or touching the touch pad. 
    For more information on hibernate mode, see the documentation that came with your operating system. 
    						
    All Proxima manuals Comments (0)

    Related Manuals for Proxima Dp6150 Projector User Manual