RCA Rlded3258ae Manual

 
   
If You Have Digital Cable without Cable Box or Antenna…   
 
 
 
 
 
 
Connection Suggestions
 
1.Make sure the power of HDTV is turned off. 
2.Connect the  RF cable from your antenna  or digital cable to the TV port on the 
back of your HDTV. 
3.Turn on the HDTV. 
4.Follow the first time on screen instructions. 
Not all broadcasts are in High Definition (HD).    Please refer to your local 
broadcasting stations for more information. 
The HDTV’s tuner is designed for HDTV therefore requires a...

 
Connecting DVD Player with Component YPbPr… 
 
 
 
1. Make sure the power of HDTV and your DVD player is turned off. 
2. Obtain a Component Cable. Connect the green color connector to both your DVD 
player and YPbPr’s green connector port on the back of your HDTV. 
3. Connect the blue color connector to both your DVD player and YPbPr’s blue 
connector port on the back of your HDTV. 
 
4. Connect the red color connector to both your DVD player and YPbPr’s red connector 
port on the back of your HDTV....

 
Connecting Wii™ with Composite… 
 
   
 
1.Make sure the power of HDTV and your Wii™ is turned off. 
2.Obtain a Yellow Video Cable. Connect the Yellow Video connector to both your Wii™ 
and AV’s Yellow Video connector port on the back side of your HDTV. 
3.Obtain a RCA Audio Cable.    Connect the white color connector to both your Wii™ 
and AV’s white connector port on the back side of your HDTV. 
4.Connect the red color connector to both your Wii™ and AV’s red connector port on the 
back side of your...

 
Connecting Cable or Satellite boxes with HDMI… 
 
 
 
1. Make sure the power of HDTV and your set-top box is turned off. 
2. Connect a HDMI cable to the HDMI output of your set-top box and the other end to 
the HDMI port on the back of your HDTV. 
3. Turn on the HDTV and your set-top box. 
4. Use the remote control’s source button or the source button on the TV to switch to 
HDMI. 
 
Please Note:   
Please reference the set-top box’s manual, to make sure the set-top box is 
configured to output...

 
 
 
 
 
1. Make sure the power of HDTV and your PC is turned off. 
2. Obtain a 15-pin D-Sub VGA cable; connect to the VGA output of your PC and the other 
end to the VGA port on the back of your HDTV. 
3. Obtain a 3.5 mm Mini-jack, connect to the audio out of your PC and the other end to the 
VGA Stereo Input port. 
4. Turn on the power of the HDTV and your PC. 
5. Use the remote control’s source button or the source button on the TV to switch to PC. 
6. Change your PC resolution to 1360x768 at 60hz...

 
Connecting a Digital Audio Receiver with Coaxial...
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1.Make sure the power of HDTV and your receiver is turned off. 
2.Obtain a  COAXIAL cable, connect it  to your receiver’s  COAXIAL digital 
input and the  COAXIAL connection on the LINE OUT port on the back of the 
HDTV. 
3.Turn on the HDTV and your receiver. 
 
Please Note:   
If you want pure digital stream for your receiver to decode, you must also 
configure the TV’s OSD Sound->Digital Audio Out...

 
 
Main unit description 
Control Panel Button Function 
TV Terminal Connections 
 
   
1.HEADPHONE out terminal. 
2. Line out terminal. 
3. Coaxial out terminal. 
4. AUDIO  input  terminal.ÄAudio input terminal for YPBPR and    AVÅ 
5. Component input terminal.ÄOR Video input terminalÅ 
6. HDMI1 input terminal. 
7. HDMI2 input terminal. 
8. HDMI3 input terminal 
9. VGA input terminal of simulation signal of PC. 
10. PC AUDIO input terminal. 
11. RF antenna. 
12. USB input terminalÄOnly be used to...

Remote control 
POWER: Pow
er on/
off bu
tt
on, press once to turn the TV on and press   
again to turn the TV off.   
MUTE: Press this button to mute or restore sound. 
MTS/AUDIO: When stereo program is received, press this key to   
switch sound system between mono and stereo.   
When SAP program is received, press this button to switch sound   
system between mono and SAP   
When stereo and SAP program is received, press this key to switch   
among mono, stereo and SAP. 
Press this key to show the...

Installation Guide 
PressMENUbut
toMAIN OSD MENU; / button to se
MENU you want; Press ENTER button to enter the s /  button 
option and then press  /  the sub mMENUbutt
go bacEXIT button to 
PICTURE
Y
ou c
button 
press 

a.Press