Ricoh Aficio MP 1500 User Manual

User Tools Menu ( Copier Settings )
35
4 User Tools Menu ( Copier Settings )
❖Copier Features (See p.42 “Copier Features”.)
Default
 Original Type Setting  Original  Type  1  (Text): Text Mode 1
 
Original Type 2 (Photo): Photo Mode 1
 Max. Number of Sets   99 sheets
 Original Count Dis-
play  Off
 Reproduction Ratio Metric version: 
 Ratio 1: 50% 
 Ratio 2: 71% 
 Ratio 3: 82% 
 Ratio 4: 93% 
 Ratio 5: 122% 
 Ratio 6: 141% 
 Ratio 7: 200% 
Inch version: 
 Ratio 1: 50% 
 Ratio 2: 65% 
 Ratio 3:...

User Tools
36
4Accessing User Tools
This section is for key operators in
charge of this machine.
User Tools allow you to change or set
defaults.
Note
❒Operations for system settings dif-
fer from normal operations. Al-
ways quit User Tools when you
have finished. See p.37 “Quitting
User Tools”.
❒Selected settings are highlighted.
❒Any changes you make with User
Tools remain in effect even if the
main power switch or operation
switch is turned off, or the {Clear
Modes} key is pressed.
Changing Default...

Accessing User Tools
37
4
Quitting User Tools
APress the {User Tools/Counter} key.
APE011S
Downloaded From ManualsPrinter.com Manuals 

User Tools
38
4Settings You Can Change with User Tools
Reference
To access User Tools, see p.36 “Ac-
cessing User Tools”.
 System Settings
General Features
❖ Copy Count Display 
The copy counter can be set to
show the number of copies made
(count up), or the number of copies
yet to be made (count down).
Note
❒Default: Up (count up) 
❖ Display Contrast 
You can adjust the brightness of
the display.
❖ Key Repeat 
You can select whether or not to
use the key repeat function.
Note
❒Default: On 
❖ Measurement...

Settings You Can Change with User Tools
39
4
❖ Paper Type: Bypass tray
Set the display so you can see what
type of paper is loaded in the by-
pass tray.
 The paper types you can set for
the bypass tray are as follows:
 recycled paper, special pa-
per, colour paper, letterhead,
prepunched paper, label pa-
per, bond paper, thick paper,
OHP, cardstock
Note
❒Default: Thick Paper 
❒Paper types you can set in the
bypass tray for machines with
the copy function only are plain
paper, thick paper and OHP....

User Tools
40
4
 Key Operator Tools 
The key operator must set the follow-
ing items. For settings or more infor-
mation, contact the key operator.
It is recommended that the key oper-
ator program a key operator code
when performing the settings. See
p.40 “Key Operator Code”.
❖ User Code Man.: Copier 
Allows you to control who uses the
machine by setting codes for users.
User codes must be registered for
user code management.
Note
❒Default: Off 
❖ Key Counter Management 
Use the key counter to specify...

Settings You Can Change with User Tools
41
4
BSelect [System Settings] using
{U} or {T}, and then press
the {OK} key.
CSelect [Key Operator Tools] us-
ing {U} or {T}, and then
press the {OK} key.
DSelect [Display/Print Counter]
using {U} or {T}, and then
press the {OK} key.
EPress [Print].
FPress the {Start} key.
GPress the {User Tools/Counter}
key.
❖ Counter per User Code 
Allows you to view and print the
numbers of prints accessed with
user codes, and to set those values
to 0.
Note
❒Press {U} and {T}...

User Tools
42
4
 Copier Features
Original Type Setting
You can adjust copy finish quality
level according to original type. You
can choose these functions after se-
lecting [Original Type 1 (Text)] or [Origi-
nal Type 2 (Photo)].
  Text Mode 1 
normal text originals
  Text Mode 2 
newspapers, semi-transparent
originals (reverse side print faintly
visible)
  Photo Mode 1 
text/photo images containing
mostly photo areas
  Photo Mode 2 
text/photo images containing
mostly text areas
  Photo Mode 3...

Settings You Can Change with User Tools
43
4
 Reproduction Ratio 
You can select which reduce, enlarge,
or input ratio is shown on the display
with priority when [Reduce] or [En-
large] is selected.
Note
❒Default: 
Metric version:
 Ratio 1: 50% 
 Ratio 2: 71% 
 Ratio 3: 82% 
 Ratio 4: 93% 
 Ratio 5: 122% 
 Ratio 6: 141% 
 Ratio 7: 200% 
 Inch version:
 Ratio 1: 50% 
 Ratio 2: 65% 
 Ratio 3: 78% 
 Ratio 4: 93% 
 Ratio 5: 121% 
 Ratio 6: 129% 
 Ratio 7: 155% 
 Preset R/E Priority 
You can...

User Tools
44
4 User Code 
Register user codes to restrict copier
functions to certain users, and check
on their use of copier functions:
Registering a New User Code
APress the {User Tools/Counter} key.
BSelect [System Settings] using {U}
or {T}, and then press the {OK}
key.
CSelect [Key Operator Tools] using
{U} or {T}, and then press the
{OK} key.
DSelect [Program/Change User Code]
using {U} or {T}, and then press
the {OK} key.
ESelect [Program] using {U} or {T},
and then press the {OK} key.
FEnter the...