Ricoh Aficio MP 1500 User Manual

Where to Put Your Machine
65
7
Important
❒Be careful when moving the ma-
chine. Take the following precau-
tions:
 Turn off the main power. See
p.16 “Turning Off the Main
Power”.
 Unplug the power cord from
the wall outlet. When you pull
out the plug from the socket,
grip the plug to avoid damag-
ing the cord, thereby reducing
the risk of fire or electric shock.
 Close all covers and trays, in-
cluding the front cover and by-
pass tray.
❒Do not take off the holding stand.
❒Protect the machine from...

Remarks
66
7
Access to the Machine
Place the machine near the power
source, providing the clearance areas
shown.
1.Rear: 5 cm (2) or more
2.Right: 25 cm (10) or more
3.Front: 75 cm (29.6) or more
4.Left: 15 cm (6) or more
Note
❒For the required space when op-
tions are installed, contact your
service representative.
Downloaded From ManualsPrinter.com Manuals 

Maintaining Your Machine
67
7 Maintaining Your Machine
If the exposure glass, exposure glass
cover or ADF belt is dirty, copy clari-
ty may be reduced. Clean these parts
if they are dirty.
❖Cleaning the machine
Wipe the machine with a soft,
damp cloth. Then wipe it with a
dry cloth to remove the water.
Important
❒Do not use chemical cleaner or or-
ganic solvents such as thinner or
benzene. If such substances get in-
side the machine or melt plastic
parts, a failure might occur.
❒Do not clean parts other...

Remarks
68
7
Downloaded From ManualsPrinter.com Manuals 

69
8. Security
Security
Confidential information is always at risk of being copied without permission or
subject to unauthorized access through the network. To protect documents from
such intrusion, not only can passwords be set, but also the Extended Security
function can be used to strengthen security.
For those who require increased document protection, we recommend the Ex-
tended Security function.
Primary Security Functions
❖Protecting Image Data Remaining in Memory
Protects image data remaining in...

Security
70
8Operating Environment and Notes
Security for this machine is assured on the premises that the machine is used un-
der the following conditions:
Operating Environment
 The condition of the machine is normal. (For example, it is not damaged,
modified, or lacking components.)
 The machine is managed by an administrator with thorough knowledge of
the machine and capable of providing the proper conditions under which us-
ers can use the machine safely.
For Administrator
 Security of this...

71
9. Specifications
Main Unit
❖Configuration:
Desktop
❖Photosensitivity type:
OPC drum
❖Original scanning:
One-dimensional solid scanning system through CCD
❖Copy process:
Dry electrostatic transfer system
❖Development:
Dry two-component magnetic brush development system
❖Fusing:
Heating roll pressure system
❖Resolution:
600 dpi
❖Exposure glass:
Stationary original exposure type
❖Original reference position:
Rear left corner
❖Warm-up time:
From the main power switch
15 seconds or less (20 °C)
From the...

Specifications
72
9
❖Copy paper size:
Tray: A3L – A5K, 11 × 17L – 51/2 × 81/2K
Bypass: A3L – A6L, 11 × 17L – 5
1/2 × 81/2L
 Bypass (custom size):
Vertical: 90 – 305 mm, 3.5 – 12.0
Horizontal: 148 – 1,260 mm, 5.8 – 49.6
❖Copy paper weight:
 Paper tray (Standard size): 60 – 90 g/m2, 16 – 24 lb
 Bypass tray: 52 – 162 g/m
2, 14 – 43 lb
❖Non-reproduction area:
 Leading edge: 2 ± 1.5 mm (0.08 ± 0.06 inch)
 Trailing edge: more than 0.5 mm (0.02 inch)
 Left edge: 2 ± 1.5 mm (0.08 ± 0.06 inch)
 Right...

Main Unit
73
9
❖Power consumption:
❖Dimensions (W × D × H up to exposure glass):
550 × 568 × 420mm, 21.65 × 22.36 × 16.54
❖Noise Emission *1  :
 Sound power level
 Sound pressure level 
*2 
*1The above measurements made in accordance with ISO 7779 are actual values.*2Measured at the position of the operator.
❖Weight:
35 kg (78 lb) or less
Note
❒Specifications are subject to change without notice.
Warm up Less than 1,280 W
Stand-by About 110 W
During printing About 440 W
Maximum Less than 1,280 W...

Specifications
74
9Options
Exposure Glass Cover
Lower this over originals.
Auto Document Feeder (ADF)
❖Mode:
ADF mode
❖Original size:
A3L – A5KL
 11 × 17L – 5
1/2 × 81/2KL
❖Original weight:
 One-sided originals: 52 – 105 g/m2 (14 – 28 lb)
❖Number of originals to be set:
 30 sheets (80 g/m2, 20 lb)
❖Maximum power consumption:
 less than 25 W (power is supplied from the main unit.)
❖Dimensions (W × D × H):
 550 × 470 × 90 mm, 21.7 × 18.6 × 3.6
❖Weight:
 7 kg (15 lb) or less
Note
❒Specifications are...