Ricoh Aficio MP 6000SP User Manual

Network Settings
31
1
❖[Network] → [WINS Configuration] → [Scope ID]
 Web Image Monitor:Can be used for specifying the setting.
 SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
 telnet:Can be used for specifying the setting.
❖[Network] → [Effective Protocol] → [IPv4]
 Web Image Monitor:Can be used for specifying the setting.
 SmartDeviceMonitor for Admin:You can make the TCP/IP settings if
SmartDeviceMonitor for Admin is communicating with the machine using
IPX/SPX.
...

Connecting the Machine
32
1
❖[Network] → [NW Frame Type] → [Ethernet II]
 Web Image Monitor:Can be used for specifying the setting.
 SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
 telnet:Can be used for specifying the setting.
❖[Network] → [NW Frame Type] → [Ethernet 802.2]
 Web Image Monitor:Can be used for specifying the setting.
 SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
 telnet:Can be used for specifying the setting.
❖[Network] → [NW Frame...

Network Settings
33
1
❖[Network] → [LAN Type] → [IEEE 802.11b]
 Web Image Monitor:Can be used for specifying the setting.
 SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
 telnet:Can be used for specifying the setting.
❖[Network] → [Host Name]
 Web Image Monitor:Can be used for specifying the setting.
 SmartDeviceMonitor for Admin:Can be used for specifying the setting.
 telnet:Can be used for specifying the setting.
❖[Network] → [Machine Name]
 Web Image Monitor:Can be...

Connecting the Machine
34
1
File Transfer
This section describes how to make File Transfer settings using utilities.
Change settings by using Web Image Monitor, SmartDeviceMonitor for Admin,
and telnet.
❖[File Transfer] → [SMTP Server]
 Web Image Monitor:Can be used for specifying the setting.
 SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
 telnet:Cannot be used for specifying the setting.
❖[File Transfer] → [SMTP Authentication]
 Web Image Monitor:Can be used for specifying...

Network Settings
35
1
❖[File Transfer] → [E-mail Reception Interval]
 Web Image Monitor:Can be used for specifying the setting.
 SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
 telnet:Cannot be used for specifying the setting.
❖[File Transfer] → [Max. Reception E-mail Size]
 Web Image Monitor:Can be used for specifying the setting.
 SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
 telnet:Cannot be used for specifying the setting.
❖[File Transfer] →...

Connecting the Machine
36
1Connecting the Machine to a Telephone 
Line and TelephoneThis section describes how to connect the machine to the telephone lines and se-
lect the line type.
Connecting the Telephone Line
To connect the machine to a telephone line, use a snap-in modular type connec-
tor.
Important
❒Make sure the connector is the correct type before you start.
1.External telephone connector
2.G3 interface unit connector
3.Extra G3 interface unit connector
BEY009S
Downloaded From...

Connecting the Machine to a Telephone Line and Telephone
37
1
Selecting the Line Type
Select the line type to which the machine is connected. There are two types: tone
and pulse dial.
Select the line type using Administrator Tools.
Note
❒This function is not available in some regions.
Reference
p.130 “Initial Settings”
Downloaded From ManualsPrinter.com Manuals 

Connecting the Machine
38
1
Downloaded From ManualsPrinter.com Manuals 

39
2. System Settings
This chapter describes user tools in the System Settings menu. For details on
how to access System Settings, see “Accessing User tools”.
General Features
This section describes the user tools in the General Features menu under System
Settings.
Default settings are shown in bold type.
❖Program / Change / Delete User Text
You can register character strings you use frequently when specifying set-
tings, such as “.com” and “Regards”.
You can register up to 40 items.
 Program / Change...

System Settings
40
2
❖Copy Count Display (copier/Document Server)
The copy counter can be set to show the number of copies made (count up) or
the number of copies yet to be made (count down).
The default setting is Up.
❖Function Priority
You can specify the mode to be displayed immediately after the operation
switch is turned on, or when System Reset mode is turned on.
The default setting is Copier.
❖Print Priority
Print Priority is given to the mode selected.
The default setting is Display Mode.
When...