Roland XC 540 User Manual
Have a look at the manual Roland XC 540 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10 Roland manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 116
114Chapter 6 Feature Reference
6-10 Saving the Printer Settings to Match the Media
Saving Optimized Media Settings As Preset Values
Procedure
Press .
Press .
Press
.
Press .
Use
to select any one from NAME1 to NAME8.
Press
to save.
The present menu settings are saved in the preset you chose in step
Press .
Press
to go back to the original screen.
Description
Using the [PRESET] menu lets you easily change a wide variety of settings to optimize them for the media.
Making changes for each menu...](http://img.usermanuals.tech/thumb/4143/37725/w64_Roland_XC-540-115.png "Page 116
114Chapter 6 Feature Reference
6-10 Saving the Printer Settings to Match the Media
Saving Optimized Media Settings As Preset Values
Procedure
Press .
Press .
Press
.
Press .
Use
to select any one from NAME1 to NAME8.
Press
to save.
The present menu settings are saved in the preset you chose in step
Press .
Press
to go back to the original screen.
Description
Using the [PRESET] menu lets you easily change a wide variety of settings to optimize them for the media.
Making changes for each menu...")
![Page 117
6-10 Saving the Pinter Settings to Match the Media
115Chapter 6 Feature reference
Menu Items That Can Be Saved in Presets
[PRE] (Pre heater)
[PRINT] (Print heater)
[DRYER]
P.36 Settings of the Media Heating System
[EDGE DETECTION]
P.86 Using Transparent Media
[SCAN INTERVAL]
P.86 Printing Hard-to-dry Media
[VACUUM POWER]
P.87 Preventing Media from Coming Loose
[FULL WIDTH S]
P.88 Speeding Up Output for Narrow Media
[FEED FOR DRY]
P.93 Drying the Trailing Edge of the Printing Area on the...](http://img.usermanuals.tech/thumb/4143/37725/w64_Roland_XC-540-116.png "Page 117
6-10 Saving the Pinter Settings to Match the Media
115Chapter 6 Feature reference
Menu Items That Can Be Saved in Presets
[PRE] (Pre heater)
[PRINT] (Print heater)
[DRYER]
P.36 Settings of the Media Heating System
[EDGE DETECTION]
P.86 Using Transparent Media
[SCAN INTERVAL]
P.86 Printing Hard-to-dry Media
[VACUUM POWER]
P.87 Preventing Media from Coming Loose
[FULL WIDTH S]
P.88 Speeding Up Output for Narrow Media
[FEED FOR DRY]
P.93 Drying the Trailing Edge of the Printing Area on the...")
![Page 120
118Chapter 6 Feature Reference
6-12 Viewing System Information
Viewing the Serial Number, Firmware Version, and Other Information
Procedure
Press .
Press
several times.
Press .
Use
to choose the information you want to view.
Press .
Press .
Press
to go back to the original screen.
Description
You can view the following information.
[MODEL]: model name
[SERIAL NO.]: serial number
[INK]: ink type
[FIRMWARE]: firmware version
Viewing the Network Settings
Procedure
Press .
Press
several times....](http://img.usermanuals.tech/thumb/4143/37725/w64_Roland_XC-540-119.png "Page 120
118Chapter 6 Feature Reference
6-12 Viewing System Information
Viewing the Serial Number, Firmware Version, and Other Information
Procedure
Press .
Press
several times.
Press .
Use
to choose the information you want to view.
Press .
Press .
Press
to go back to the original screen.
Description
You can view the following information.
[MODEL]: model name
[SERIAL NO.]: serial number
[INK]: ink type
[FIRMWARE]: firmware version
Viewing the Network Settings
Procedure
Press .
Press
several times....")
![Page 121
6-12 Viewing System Information
119Chapter 6 Feature Reference
Description
You can view the following information.
[IP ADDRESS]: IP ADDRESS
[SUBNET MASK]: SUBNET MASK
[GATEWAY ADDRESS]: GATEWAY ADDRESS
[MAC ADDRESS]: MAC ADDRESS
Printing a System Report
Procedure
Press .
Press
several times.
Press .
Press
several times.
Press
to start printing,
Press .
Press
to go back to original screen.
Description
This prints system information, including a list of setting values.
W 1346mm
SETUP SHEET...](http://img.usermanuals.tech/thumb/4143/37725/w64_Roland_XC-540-120.png "Page 121
6-12 Viewing System Information
119Chapter 6 Feature Reference
Description
You can view the following information.
[IP ADDRESS]: IP ADDRESS
[SUBNET MASK]: SUBNET MASK
[GATEWAY ADDRESS]: GATEWAY ADDRESS
[MAC ADDRESS]: MAC ADDRESS
Printing a System Report
Procedure
Press .
Press
several times.
Press .
Press
several times.
Press
to start printing,
Press .
Press
to go back to original screen.
Description
This prints system information, including a list of setting values.
W 1346mm
SETUP SHEET...")
![Page 123
121Chapter 6 Feature Reference
6-14 Menu List
Main menu
MENU
PRESETPRESET
LOAD
PRESET
SAVE
LOAD
NAME1
LOAD
NAME2
To the [CUTTING MENU] menu To the [NAME] menu
LOAD
NAME4
LOAD
NAME6
To the [NAME8] menu
To the [NAME1] menu
SAVE
NAME1
SAVE
NAME2
SAVE
NAME4
SAVE
NAME6
To the [NAME8] menu
To the [NAME1] menu
Continue Continue
Press
LOAD
NAME3
LOAD
NAME5
LOAD
NAME7
LOAD
NAME8
SAVE
NAME3
SAVE
NAME5
SAVE
NAME7
SAVE
NAME8
Continue
Downloaded From ManualsPrinter.com Manuals](http://img.usermanuals.tech/thumb/4143/37725/w64_Roland_XC-540-122.png "Page 123
121Chapter 6 Feature Reference
6-14 Menu List
Main menu
MENU
PRESETPRESET
LOAD
PRESET
SAVE
LOAD
NAME1
LOAD
NAME2
To the [CUTTING MENU] menu To the [NAME] menu
LOAD
NAME4
LOAD
NAME6
To the [NAME8] menu
To the [NAME1] menu
SAVE
NAME1
SAVE
NAME2
SAVE
NAME4
SAVE
NAME6
To the [NAME8] menu
To the [NAME1] menu
Continue Continue
Press
LOAD
NAME3
LOAD
NAME5
LOAD
NAME7
LOAD
NAME8
SAVE
NAME3
SAVE
NAME5
SAVE
NAME7
SAVE
NAME8
Continue
Downloaded From ManualsPrinter.com Manuals")
![Page 124
6-14 Menu List
122Chapter 6 Feature Reference
PRESET
NAME
NAME
_NAME
NAME3
NAME
NAME5
NAME
NAME7
NAME
NAME8
To the [NAME1] menu
To the [LOAD] menu
NAME
_
NAME
_
NAME
_
NAME
_
NAME
_
NAME
_
NAME
_
Continue Continue
MENU
ADJUST BI-DIR
ADJUST BI-DIR
SIMPLE SETTING
ADJUST BI-DIR
DETAIL SETTING
ADJUST BI-DIR
TEST PRINT
SIMPLE SETTING
00
DETAIL SETTING
SETTING NO.1
DETAIL SETTING
TEST PRINT
To the [DETAIL SETTING] menu
To the
[TEST PRINT] menu
To the [SETTING No.4] menu
To the [TEST PRINT] menu...](http://img.usermanuals.tech/thumb/4143/37725/w64_Roland_XC-540-123.png "Page 124
6-14 Menu List
122Chapter 6 Feature Reference
PRESET
NAME
NAME
_NAME
NAME3
NAME
NAME5
NAME
NAME7
NAME
NAME8
To the [NAME1] menu
To the [LOAD] menu
NAME
_
NAME
_
NAME
_
NAME
_
NAME
_
NAME
_
NAME
_
Continue Continue
MENU
ADJUST BI-DIR
ADJUST BI-DIR
SIMPLE SETTING
ADJUST BI-DIR
DETAIL SETTING
ADJUST BI-DIR
TEST PRINT
SIMPLE SETTING
00
DETAIL SETTING
SETTING NO.1
DETAIL SETTING
TEST PRINT
To the [DETAIL SETTING] menu
To the
[TEST PRINT] menu
To the [SETTING No.4] menu
To the [TEST PRINT] menu...")
![Page 125
6-14 Menu List
123Chapter 6 Feature Reference
VACUUM POWER.
AUTO
SUB MENU
FACTORY DEFAULT
Continue Continue
Continue
INK CONTROL
EMPTY MODE
SUB MENU
SLEEPSLEEP
INTERVAL
SLEEP
SETTINGSETTING
ENABLEENABLE
SUB MENU
SYSTEM REPORT
SUB MENU
INK CONTROLEMPTY MODE
STOPSTOP
INTERVAL
15min15min
CHANGE INK SET
E-SOL Max LcLm
To the [SETTING] menu
To the [INTERVAL] menu
SUB MENU
ALTERNATE HEAD
PERIODIC CL.
NONENONE
INK CONTROL
PUMP UP
INK CONTROL
HEAD WASH
SUB MENU
PERIODIC CL.
MAINTENANCE
REPLACE WIPER
INK...](http://img.usermanuals.tech/thumb/4143/37725/w64_Roland_XC-540-124.png "Page 125
6-14 Menu List
123Chapter 6 Feature Reference
VACUUM POWER.
AUTO
SUB MENU
FACTORY DEFAULT
Continue Continue
Continue
INK CONTROL
EMPTY MODE
SUB MENU
SLEEPSLEEP
INTERVAL
SLEEP
SETTINGSETTING
ENABLEENABLE
SUB MENU
SYSTEM REPORT
SUB MENU
INK CONTROLEMPTY MODE
STOPSTOP
INTERVAL
15min15min
CHANGE INK SET
E-SOL Max LcLm
To the [SETTING] menu
To the [INTERVAL] menu
SUB MENU
ALTERNATE HEAD
PERIODIC CL.
NONENONE
INK CONTROL
PUMP UP
INK CONTROL
HEAD WASH
SUB MENU
PERIODIC CL.
MAINTENANCE
REPLACE WIPER
INK...")
![Page 126
6-14 Menu List
124Chapter 6 Feature Reference
SYSTEM INFO .
MODEL
SYSTEM INFO .
INK
SYSTEM INFO .
FIRMWARE
Continue
MENU
SYSTEM INFO .MODEL
XC-540
SYSTEM INFO .
SERIAL NO .SERIAL NO .
ZS00001
INK
E-SOL Max LcLm
FIRMWARE
Ver.1.00
To the [NETWORK] menu
To the [MODEL] menu
MENU
INK REMAINING
SHEET REMAIN
SET LENGTH
MENU
SHEET REMAINSHEET REMAIN
PRINT MEMO
SET LENGTH
0.0 m0.0 m
To the [AUTO DISPLAY] menu
To the [PRINT MEMO] menu
SHEET REMAIN
AUTO DISPLAYAUTO DISPLAY
DISABLEDISABLE
1 2...](http://img.usermanuals.tech/thumb/4143/37725/w64_Roland_XC-540-125.png "Page 126
6-14 Menu List
124Chapter 6 Feature Reference
SYSTEM INFO .
MODEL
SYSTEM INFO .
INK
SYSTEM INFO .
FIRMWARE
Continue
MENU
SYSTEM INFO .MODEL
XC-540
SYSTEM INFO .
SERIAL NO .SERIAL NO .
ZS00001
INK
E-SOL Max LcLm
FIRMWARE
Ver.1.00
To the [NETWORK] menu
To the [MODEL] menu
MENU
INK REMAINING
SHEET REMAIN
SET LENGTH
MENU
SHEET REMAINSHEET REMAIN
PRINT MEMO
SET LENGTH
0.0 m0.0 m
To the [AUTO DISPLAY] menu
To the [PRINT MEMO] menu
SHEET REMAIN
AUTO DISPLAYAUTO DISPLAY
DISABLEDISABLE
1 2...")
6-12 Viewing System Information
119Chapter 6 Feature Reference
Description
You can view the following information.
[IP ADDRESS]: IP ADDRESS
[SUBNET MASK]: SUBNET MASK
[GATEWAY ADDRESS]: GATEWAY ADDRESS
[MAC ADDRESS]: MAC ADDRESS
Printing a System Report
Procedure
Press .
Press
several times.
Press .
Press
several times.
Press
to start printing,
Press .
Press
to go back to original screen.
Description
This prints system information, including a list of setting values.
W 1346mm
SETUP SHEET
ROLL
MENU
SUB MENU
SUB MENU
SYSTEM REPORT
Downloaded From ManualsPrinter.com Manuals
120Chapter 6 Feature Reference 6-13 Performing Maintenance Draining Ink and Performing Internal Washing Procedure Press . Press several times. Press . Press twice. Press . Press twice. Press to execute. Description This drains the ink inside the printer and washes the interior using cleaning cartridges as a preliminary for moving the printer or conducting maintenance. This operation requires eight unused cleaning cartridges. The screen displays information such as instructions to insert and remove cartridges. Follow these instructions to carry out the procedure. After finishing washing, the sub power is switched off. You do not need to carry this out as part of your daily maintenance activities. Draining Ink Remaining Inside the Machine Procedure Press . Press several times. Press . Press twice. Press . Press . Press to execute. Description This removes ink inside the printer as a preliminary procedure for performing maintenance. The screen displays infor- mation such as instructions to insert and remove cartridges. Follow these instructions to carry out the procedure. After finishing washing, the sub power is switched off. You do not need to carry this out as part of your daily maintenance activities. MENU SUB MENU MENU SUB MENU SUB MENU INK CONTROL SUB MENU INK CONTROL INK CONTROL HEAD WASH INK CONTROL PUMP UP Downloaded From ManualsPrinter.com Manuals
121Chapter 6 Feature Reference 6-14 Menu List Main menu MENU PRESETPRESET LOAD PRESET SAVE LOAD NAME1 LOAD NAME2 To the [CUTTING MENU] menu To the [NAME] menu LOAD NAME4 LOAD NAME6 To the [NAME8] menu To the [NAME1] menu SAVE NAME1 SAVE NAME2 SAVE NAME4 SAVE NAME6 To the [NAME8] menu To the [NAME1] menu Continue Continue Press LOAD NAME3 LOAD NAME5 LOAD NAME7 LOAD NAME8 SAVE NAME3 SAVE NAME5 SAVE NAME7 SAVE NAME8 Continue Downloaded From ManualsPrinter.com Manuals
6-14 Menu List 122Chapter 6 Feature Reference PRESET NAME NAME _NAME NAME3 NAME NAME5 NAME NAME7 NAME NAME8 To the [NAME1] menu To the [LOAD] menu NAME _ NAME _ NAME _ NAME _ NAME _ NAME _ NAME _ Continue Continue MENU ADJUST BI-DIR ADJUST BI-DIR SIMPLE SETTING ADJUST BI-DIR DETAIL SETTING ADJUST BI-DIR TEST PRINT SIMPLE SETTING 00 DETAIL SETTING SETTING NO.1 DETAIL SETTING TEST PRINT To the [DETAIL SETTING] menu To the [TEST PRINT] menu To the [SETTING No.4] menu To the [TEST PRINT] menu MENU CALIBRATION CALIBRATION SETTING CALIBRATION TEST PRINT SETTING 0.00%0.00% To the [SETTING] menu To the [TEST PRINT] menu To the [NAME8] menu DETAIL SETTING SETTING NO.2 DETAIL SETTING SETTING NO.3 DETAIL SETTING SETTING NO.4 H4 H5 H600 0H1 H2 H300 0 H4 H5 H600 0H1 H2 H300 0 H4 H5 H600 0H1 H2 H300 0 H4 H5 H600 0H1 H2 H300 0 NAME NAME1 NAME NAME2 NAME NAME4 NAME NAME6 Continue Continue Downloaded From ManualsPrinter.com Manuals
6-14 Menu List 123Chapter 6 Feature Reference VACUUM POWER. AUTO SUB MENU FACTORY DEFAULT Continue Continue Continue INK CONTROL EMPTY MODE SUB MENU SLEEPSLEEP INTERVAL SLEEP SETTINGSETTING ENABLEENABLE SUB MENU SYSTEM REPORT SUB MENU INK CONTROLEMPTY MODE STOPSTOP INTERVAL 15min15min CHANGE INK SET E-SOL Max LcLm To the [SETTING] menu To the [INTERVAL] menu SUB MENU ALTERNATE HEAD PERIODIC CL. NONENONE INK CONTROL PUMP UP INK CONTROL HEAD WASH SUB MENU PERIODIC CL. MAINTENANCE REPLACE WIPER INK CONTROL CHANGE INK SET To the [CHANGE INK SET] menu To the [EMPTY MODE] menu FULL WIDTH S FULLFULL ALTERNATE HEAD ENABLEENABLE SUB MENU FULL WIDTH S SUB MENU MAINTENANCEMAINTENANCE CLEANING MAINTENANCE REPLACE KNIFE MAINTENANCE DRAIN BOTTLE To the [EDGE DETECTION] menu To the [CLEANING] menu To the [DRAIN BOTTLE] menu MENU HEAD HEIGHT MENU SUB MENU HEAD HEIGHT HIGHHIGH SUB MENU EDGE DETECTION SUB MENU SCAN INTERVAL SUB MENU VACUUM POWER EDGE DETECTION ENABLEENABLE SCAN INTERVAL OFFOFF AUTO To the [MAINTENANCE] menu Downloaded From ManualsPrinter.com Manuals
6-14 Menu List 124Chapter 6 Feature Reference SYSTEM INFO . MODEL SYSTEM INFO . INK SYSTEM INFO . FIRMWARE Continue MENU SYSTEM INFO .MODEL XC-540 SYSTEM INFO . SERIAL NO .SERIAL NO . ZS00001 INK E-SOL Max LcLm FIRMWARE Ver.1.00 To the [NETWORK] menu To the [MODEL] menu MENU INK REMAINING SHEET REMAIN SET LENGTH MENU SHEET REMAINSHEET REMAIN PRINT MEMO SET LENGTH 0.0 m0.0 m To the [AUTO DISPLAY] menu To the [PRINT MEMO] menu SHEET REMAIN AUTO DISPLAYAUTO DISPLAY DISABLEDISABLE 1 2 3 4 5 6 7 8 SYSTEM INFO . NETWORK SUBNET MASK 2 5 5 . 2 5 5 . 2 5 5 . 2 5 5SUBNET MASK 2 5 5 . 2 5 5 . 2 5 5 . 2 5 5NETWORK SUBNET MASK GATEWAY ADDRESS 2 5 5 . 2 5 5 . 2 5 5 . 2 5 5GATEWAY ADDRESS 2 5 5 . 2 5 5 . 2 5 5 . 2 5 5NETWORK GATEWAY ADDRESS MAC ADDRESS 0 0 0 0 8 6 1 4 8 C 5 FNETWORK MAC ADDRESS IP ADDRESS 2 5 5 . 2 5 5 . 2 5 5 . 2 5 5IP ADDRESS 2 5 5 . 2 5 5 . 2 5 5 . 2 5 5To the [MAC ADDRESS] menu To the [IP ADDRESS] menu HEATER MENU FEED FOR DRY HEATER MENU OPTION DRYER HEATER MENU BLOWER FAN MENU HEATER MENU HEATER MENU PREHEATING FEED FOR DRY DISABLEDISABLE PREHEATING 3 0 C3 0 C OPTION DRYER DISABLEDISABLE BLOWER FAN DISABLEDISABLE To the [BLOWER FAN] menu To the [FEED FOR DRY] menu 9 10 11 12 NETWORK IP ADDRESS Continue (* 1) Keep pushing , push leads to display this menu. (*1) Downloaded From ManualsPrinter.com Manuals
6-14 Menu List 125Chapter 6 Feature Reference CUTTING MENU PRINT-CUT ADJ .PRINT-CUT ADJ . TEST PRINT Continue MENU CUTTING MENUTo the [AUTO ENV. MATCH] menu To the [TEST PRINT] menu To the [TEST PRINT 2] menu To the [PRESET] menu F : + 0 . 0 0 0 . 0 0 m S : + 0 . 0 0 0 . 0 0 m CUTTING MENU CALIBRATION To the [FEED SETTING] menu To the [SCAN SETTING] menuFEED SETTING 0 . 0 0 % SCAN SETTING 0 . 0 0 % CUTTING MENU PREFEED CUTTING MENU CUTTING PRIOR PREFEED DISABLE CUTTING PRIOR COMMAND DISABLE COMMAND 0 . 0 0 % 0 . 0 0 % To the [PRINT-CUT ADJ .] menu PRINT-CUT ADJ . TEST PRINT 2 PRINT-CUT ADJ . SETTING CUTTING MENU CROP-CUT ADJ .CROP-CUT ADJ . TEST PRINT To the [TEST PRINT] menu To the [TEST PRINT 2] menu F : + 0 . 0 0 0 . 0 0 m S : + 0 . 0 0 0 . 0 0 m CROP-CUT ADJ . TEST PRINT2 CROP-CUT ADJ . SETTING CALIBRATION FEED SETTING CALIBRATION SCAN SETTING CUTTING MENU AUTO ENV. MATCHAUTO ENV. MATCH ENABLEENABLE (*2) Keep pushing , push leads to display this menu. (*2) Downloaded From ManualsPrinter.com Manuals
6-14 Menu List
126Chapter 6 Feature Reference
Langage and Unit Menu
Cleaning Menu
Heater Configration Menu
MENU LANGUAGE
ENGLISH
Hold down and switch on the sub power.
LENGTH UNIT
mmmm
TEMP UNIT
C C
CLEANING
NORMAL CL.
CLEANING
MEDIUM CL.
To the [POWERFUL CL.] menu
To the [NORMAL CL.] menu
NORMAL CL.
ABC
MEDIUM CL.
ABC
CLEANING
POWERFUL CL.POWERFUL CL.
ABC
Press
Press
PRE 40 PRINT 40
DRYER 50
PRE 40 4040PRINT 40 4040DRYER 50 50 50
Hold down for one second or longer
Head cleaning for all group
P.41 (When you want to clean all
heads simultaneously)
Downloaded From ManualsPrinter.com Manuals
6-14 Menu List 127Chapter 6 Feature Reference Press FORCE 5 0 gfSPEED 2 0 cm/sOFF SET 0 . 2 5 0 mm5 0 gf2 0 cm/s0 . 2 5 0 mmUP SPEED 2 0 cm / s2 0 cm / s Cut Configration Menu Downloaded From ManualsPrinter.com Manuals