Roland XC 540 User Manual
Have a look at the manual Roland XC 540 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10 Roland manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 151
8-3 Specifications
149Chapter 8 Appendix
*1
The length of printing or cutting is subject to the limitations of the program or driver.
*2
➢At Roland PET film, print travel: 1 m
➢Temperature: 25°C (77°F), humidity: 50%
*3
Not assured when the print heater or dryer is used.
*4
The following conditions must be met:
➢ Media type: Media specified by Roland DG Corp.
➢Roll media must be loaded on the shaft
➢[PREFEED] menu item must be set to [ENABLE]
➢Side margins: 25 mm or more for both the left and right...](http://img.usermanuals.tech/thumb/4143/37725/w64_Roland_XC-540-150.png "Page 151
8-3 Specifications
149Chapter 8 Appendix
*1
The length of printing or cutting is subject to the limitations of the program or driver.
*2
➢At Roland PET film, print travel: 1 m
➢Temperature: 25°C (77°F), humidity: 50%
*3
Not assured when the print heater or dryer is used.
*4
The following conditions must be met:
➢ Media type: Media specified by Roland DG Corp.
➢Roll media must be loaded on the shaft
➢[PREFEED] menu item must be set to [ENABLE]
➢Side margins: 25 mm or more for both the left and right...")
8-3 Specifications 149Chapter 8 Appendix *1 The length of printing or cutting is subject to the limitations of the program or driver. *2 ➢At Roland PET film, print travel: 1 m ➢Temperature: 25°C (77°F), humidity: 50% *3 Not assured when the print heater or dryer is used. *4 The following conditions must be met: ➢ Media type: Media specified by Roland DG Corp. ➢Roll media must be loaded on the shaft ➢[PREFEED] menu item must be set to [ENABLE] ➢Side margins: 25 mm or more for both the left and right margins ➢Front margin: 35 mm or more ➢Excluding stretching/contraction of the media Range for assured repetition accuracy ➢For media with a width exceeding 610 mm: Length 4,000 mm ➢For media with a width of 610 mm or less: Length 8,000 mm *5 ➢Provided that media length is under 3000 mm ➢Temperature: 25°C (77°F) ➢Excluding possible shift caused by expansion/contraction of the media and/or by reloading the media *6 ➢Media type : Roland PET film ➢Data size: 1,000 mm in the media-feed direction, 1,346 mm in the carriage-movement direction ➢No lamination ➢Automatic detection of crop marks at 4 points when media is reloaded ➢During cutting, [PREFEED] menu item must be set to [ENABLE] ➢Temperature: 25°C (77°F) ➢Excludes the effects of slanted movement and of expansion and contraction of the media *7 ➢Warm-up is required after powerup. This may require 5 to 20 minutes, depending on the operating environment. ➢Depending on the ambient temperature and media width, the preset temperature fail to be reached. *8 Operating environment 80 55 35 15 27 32 Humidity 20(%) °C (°F)(no condensation) Temperature (59)(89.6) (80.6) (68) 0 Use in an operating environment with this range. Downloaded From ManualsPrinter.com Manuals
About the GPL/LGPL software used in this product Thank you for purchasing our product. This product is using the GNU General Public License (GPL) / GNU Lesser General Public License (LGPL) software. You have the right to acquire, modify and distribute the source code for this GPL/LGPL software. You can obtain the GPL/LGPL source code used in this product by downloading it from the following website URL: < http://www.rolanddg.com/gpl/ > Downloaded From ManualsPrinter.com Manuals
R1-060529 Downloaded From ManualsPrinter.com Manuals