Samsung CLP 325W User Manual

							Basic setup_ 51
3.Select Printer and click Properties…
4.Click Advanced tab.
5.Select tray (source) and its options, such as paper size and type.
6.Press OK.
Using the power saving feature
When you will not be using the machine for a while, you can use this feature 
to save power.
You change power save in Printer Settings Utility.
1.Double-click the Smart Panel icon on the Windows task bar (or 
Notification Area in Linux). You can also click Smart Panel on the status 
bar in Mac OS X (See 
Using the Smart Panel program on page 69).
Or, if you are a Windows user, you can launch it from the Start menu, 
select Programs or All Programs > Samsung Printers > your printer 
driver name > Smart Panel.
2.Click Printer Setting.
3.Click Setting > Power Save. Select the appropriate value from the 
drop-down list, and then click Apply. 
Changing font setting 
(CLP-320N(K)/CLP-321N/CLP-325W(K)/ 
/CLP-326W only)
Your machine has preset font setting depending on your region or country.
If you want to change the font or set the font for special condition, such as 
the DOS environment, you can change the font setting as follows:
1.Double-click the Smart Panel icon on the Windows task bar (or 
Notification Area in Linux). You can also click Smart Panel on the status 
bar in Mac OS X (See 
Using the Smart Panel program on page 69).
Or, if you are a Windows user, you can launch it from the Start menu, 
select Programs or All Programs > Samsung Printers > your printer 
driver name > Smart Panel.
2.Click Printer Setting.
3.Click Emulation.
4.Confirm if PCL is selected in Emulation Setting.
5.Click Setting.
6.Select your preferred font in the Symbol set list.
7.Click Apply.
 Following information shows the proper font list for corresponding 
languages.
•Russian: CP866, ISO 8859/5 Latin Cyrillic
•Greek: ISO 8859/7 Latin Greek, PC-8 Latin/Greek
•Arabic & Farsi: HP Arabic-8, Windows Arabic, Code Page 864, 
Farsi, ISO 8859/6 Latin Arabic
Setting the humidity mode
Print quality is affected by humidity levels. Paper may be damp if your 
location is a humid area: set the humidity mode. 
1.Ensure that you have installed the printer driver with the provided Printer 
Software CD. 
2.Double-click the Smart Panel icon on the Windows task bar (or 
Notification Area in Linux). You can also click Smart Panel on the status 
bar in Mac OS X.
3.Click Printer Setting.
 If your machine is connected to the network, you can set the 
humidity mode via SyncThru™ Web Service.
4.Click Setting > Humidity. Select the appropriate value from the 
drop-down list, and then click Apply.
Downloaded From ManualsPrinter.com Manuals 
						

							Media and tray_ 52
6.media and tray
This chapter introduces you how to load or iginals and print media into your machine.
This chapter includes:
•Selecting print media
• Changing the tray size
• Loading paper in the tray •
Printing on special media
• Setting the paper size and type
• Using the output support
  
Selecting print media
You can print on a variety of print me dia, such as plain paper, envelopes, 
labels, and transparencies. Always use print media that meets the 
guidelines for use with your machi ne and from the appropriate tray.
Guidelines for selecting the print media
Print media that does not meet the gui delines outlined in this user’s guide 
may cause the following problems:
• Poor print qua
 lity
• In
creased paper jams
•Pre
mature wear on the machine.
•Permanen
 t fuser damage, not covered under warranty.
Properties, such as weight, compositio n
 , grain, and moisture content, are 
important factors that affect the  machine’s performance and the output 
quality. When you choose print materials, consider the following:
• The
 type, size and weight of the print media for your machine are 
described later in this section.
• Desired
  outcome: The print media you choose should be appropriate for 
your project.
• Bri
ghtness: Some print media are whiter than others and produce 
sharper, more vibrant images.
• Surfa
ce smoothness: The smoothness of the print media affects how 
crisp the printing looks on the paper.
 •Some print media may meet all of the guidelines in this section and 
still not produce satisfactory results.  This may be the result of the 
sheets characteristics, impro per handling, unacceptable 
temperature and humidity levels,  or other variables over which 
cannot be controlled.
• Before purcha
 sing large quantities of print media, ensure that it 
meets the required specifications  in this user’s guide and meets 
your output requirements. 
 
• Using print media that does not meet these specifications may cause 
problems or require repairs. Such repairs are not covered by 
Samsung’s warranty or service agreements.
• Make sure not to
  use the inkjet photo paper with this machine. It 
could cause damage to the machine. 
• U
sing inflammable print media can cause a fire.
•Use 
designated print media  (See Print media specifications on 
page  92 ).
 
The use of inflammable media or foreign materials left in the printer 
may lead to overheating of the unit and , in rare cases may cause a 
fire.
Media sizes supported in each mode
ModeSizeTypeSource
Simplex 
pri
 nting For details about 
pape
r size, see 
Print media 
specifications on 
page  92 . For details about 
pa
per type, see 
Print media 
specifications on 
page  92 . Tray
Duplex 
pri
 nting 
(Manual)
a
a. 75 to 90  g/m² (20-24  lbs bond) only
Letter, Legal, Oficio, 
US Foli

o, A4, ISO 
B5, JIS B5, 
Executive, A5, A6 Plain, Thick, 
Co
tton, Color, 
Preprinted, 
Recycled, 
CardStock, Archive Tray
Downloaded From ManualsPrinter.com Manuals 
						

							Media and tray_ 53
Changing the tray size
To load different sizes of paper, such as Legal-sized paper, you need to 
adjust the paper guides to extend the paper tray.
To change the tray size to other size, you must adjust the paper 
l

ength/width guides properly.
3
2
1
4
1 Paper extend lever
2Paper cover
3Paper length guide
4Paper width guide
1. Pull the tray out of the machine. Open the paper cover and remove 
paper from the tray if necessary. 
2.Pressing and unlatching the guide lock in the tray, pull the tray out 
manually.
1
3.Place paper with the side you want to print facing up.
4. Slide the paper length guide until it lightly touches the end of the paper 
stack. Squeeze the paper width guide  and slide it to the edge of the 
paper stack without causing it to bend.
For paper smaller than Letter-sized, return the paper guides to their 
original positions and adjust the paper length guide and paper width 
guide.
If the paper that you need to print is shorter than length 222 mm (8.74 
inches), press and unlatch the guide lock in the tray, push the tray in 
manually. Adjust the paper length guide and paper width guide.
1
2
 • Do not push the paper width guides far enough to cause the 
materials to warp.
• If you do no
 t adjust the paper wid th guides, it may cause paper 
jams.
Downloaded From ManualsPrinter.com Manuals 
						

							Media and tray_ 54
•Do not use a paper with more than 6 mm (0.24 inch.) curl.
5. Close the paper cover.
6.Slide the tray back into the machine until it clicks.
7. Set 
the paper type and size for the tray ( Setting the paper size and 
type on page  58).
 If you experience problems with  paper feeding, check whether the 
paper meets the media specifications. Then, try placing one sheet 
at a time in tray (See  Print media specifications on page  92 or 
see  Printing on special media on page  56 ).
The tray is preset to Letter or A4 size, depending on your country. To 
ch
 ange the size to A4 or Letter, you must adjust the lever and paper width 
guide properly.
1. Pull the tra
 y out of the machine. Open the paper cover and remove 
paper from the tray if necessary.
2. If 
you want to change the size to Lett er, hold the lever at the back of the 
tray, and rotate the lever clockwise.
LTR A4
3.
Squeeze the paper width guide and slide it to the edge of the lever.
LT RA4
 If you want to change the size to A4, first move the paper width 
guide to left and rotate the lever counterclockwise. If you force the 
lever, it could damage the tray.
Loading paper in the tray
In the tray
1.Pull out the paper tray. Adjust the tray size to the media size you are 
loading (See  Changing the tray size on page  53 ).
2. F
lex or fan the edge of the paper stack to separate the pages before 
loading the paper.
3.Place the paper with the side you want to print facing up.
4. Sq
ueeze the tray paper guides and adjust them to the width and length 
of the paper. Do not force them too mu ch or the paper will be bent result 
in a paper jam or skew.
5. Close the paper cover.
Downloaded From ManualsPrinter.com Manuals 
						

							Media and tray_ 55
6.Insert the tray back into the machine.
7. To pri
nt in application, open an  application and start the print menu.
8. Ope
n  Printing Preferences  (See Opening printing preferences on 
page  60 ).
9. Pr
ess the  Paper tab in  Printing Preferences  and select an appropriate 
paper type, size and source.
10. Pr
ess  OK.
11. Sta
rt printing in application.
 If you experience problems with  paper feeding, check whether the 
paper meets the media specificati on. Then, try placing one sheet 
at a time in the tray (See  Print media specifications on page  92 ).
The tray is preset to Letter or A4 size, depending on your country. To 
ch
 ange the size to A4 or Letter, you must adjust the lever and paper width 
guide properly.
1. Pull the tra
 y out of the machine. Open the paper cover and remove 
paper from the tray if necessary.
2. If 
you want to change the size to Lett er, hold the lever at the back of the 
tray, and rotate the lever clockwise.
LTR A4
3.
Squeeze the paper width guide and slide it to the edge of the lever.
LT RA4
 If you want to change the size to A4, first move the paper width 
guide to left and rotate the lever counterclockwise. If you force the 
lever, it could damage the tray.
Manual feeding in the tray
To load different sizes of paper such as envelope, transparency, labels or 
custom-sized paper, you need to adjust the paper guides for manual 
feeding in the tray.
To use manual feeding in the tray, y ou must 
 adjust the paper length/width 
guide properly.
Tips on using the manual feeding method
Tips on manual feeding in the tray
• If you select  Ma
 nual Feeder for Source  from your software application, 
you need to press  Cancel (
) button each time you print a page. 
Load only one type, size and weight of p
 rint media at a time in the 
tray.
• To
 prevent paper jams, do not add media while printing. This also 
applies to other types of print media.
• Print me
dia should be loaded face up with the top edge going into the 
tray first and be placed in  the center of the tray.
• Always loa
 d the use recommended print media only to avoid paper 
jams and print quality problems (See  Print media specifications on 
page  92 ).
• Fl
atten any curl on postcards, envelopes and labels before loading 
them into the tray.
1. Pu
ll the tray out of the machine. Open the paper cover and remove 
paper from the tray if necessary. 
2.Place paper with the side you want to print facing up.
3.Squeeze the tray paper width guided and adjust them to the width of 
the paper until it lightly touches t he end of the paper stack. Do not 
force too much, or the paper will bend resulting in a paper jam or 
skew.
For paper smaller than Letter-sized, return the paper guides to their 
original positions and adjust the paper length guide and paper width 
Downloaded From ManualsPrinter.com Manuals 
						

							Media and tray_ 56
guide.
If the paper that you need to print is shorter than length 222 mm 
(8.74 inches), press and unlatch the guide lock in the tray, push the 
tray in manually. Adjust the paper length guide and paper width 
guide.
1
2
 •Do not push the paper width guides far enough to cause the 
materials to warp.
• If 
you do not adjust the paper width guides, it may cause 
paper jams.
•Do not use a paper with more than 6 mm (0.24 inch.) curl.
4. Close the paper cover.
5.Slide the tray back into th e machine until it clicks.
6. To prin
t in application, open an application and start the print menu.
7.Ope
n  Printing Preferences  (See Opening printing preferences on 
page  60).
8. Pre
ss the  Paper tab in  Printing Preferences , and select an 
appropriate paper type.
 For example, if you want to use a label, set the paper type to 
Label .
9. Select  Man
 ual Feeder in paper source, then press  OK.
10. Start printin
 g in application.
 If you are printing multiple pages, load the next sheet after the first 
page prints out, and press the  Cancel (
) button. Repeat this 
step for every page to be printed.
Printing on special media
The table below shows the available special media for each tray.
 When using special media, we recommend you feed one paper at a 
time. Check the maximum input number of media for each tray (See 
Print media specifications on page  92 ).
TypesTrayManual feeding in 
the tray
Plain ●●
Thick  ●●
Thin   ●●
Cotton  ●●
Color ●●
Preprinted ●●
Recycled ●●
Envelope ●
Transparency ●
Labels ●
CardStock ●
Bond ●
Archive ●
Glossy Photo  ●
Matte Photo ●
(  ●: 
Supported, Blank: Not supported) 
The following media types are shown in the  Prin
 ting Preferences. This 
paper type option allows you to set the type of paper to be loaded in the 
tray. Selecting the appropriate medi a will let you get the best printout 
quality. Selecting inappropriate medi a can result in poor print quality.
• Plain:  Normal plain paper. Select this type if your printing on 70 to 90 
g/

m2 (19 to 24 lbs bond).
• T
hick:  90 to 105 g/m2 (24 to 28 lbs bond) thick paper.
• Th
in:  60 to 70 g/m2 (16 to 19 lbs bond) thin paper.
• C
otton:  75 to 90 g/m2 (20 to 24 lbs bond) cotton paper.
• Co
lor:  75 to 90 g/m2 (20 to 24 lbs bond) color-backgrounded paper.
• Pr
eprinted:  75 to 90 g/m2 (20 to 24 lbs bond) preprinted/letterhead 
paper.
• R
ecycled:  75 to 90 g/m2 (20 to 24 lbs bond) recycled paper.
 When you use recycled paper, printouts might be wrinkled and/or 
jamming may occur due  to excessive curl.
• En
velope:  75 to 90 g/m2 (20 to 24 lbs bond) envelope.
• Tr
ansparency:  0.104 to 0.124 mm (0.004094 to 0.004882 inches) 
tran
sparency paper.
• La
bels:  120 to 150 g/m2 (32 to 40 lbs bond) label.
Downloaded From ManualsPrinter.com Manuals 
						

							Media and tray_ 57
•CardStock:  105 to 163 g/m2 (28 to 43 lbs bond) cardstock.
• Bo
nd:  105 to 120 g/m2 (28 to 32 lbs bond) bond.
• Arch
ive:  70 to 90 g/m2 (19 to 24 lbs bond). If you need to keep the 
print-out for a long time, such as for archives.
• Gl
ossy Photo:  111 to 220 g/m2 (30 to 58 lbs bond) glossy photo paper. 
• M
atte Photo:  111 to 220 g/m2 (30 to 58 lbs bond) matte photo paper. 
Envelopes
Successful printing on envelopes depends upon the quality of the 
envelopes. 
To print an envelope, place it flap side down with the stamp area on the top 
left

 side.
• When selecting envelopes, consider the following factors:
-Wei
ght:  The weight of the envelope paper should not exceed 90  g/m2 
otherwise, jams may occur.
-Co
nstruction:  Prior to printing, envelopes should lie flat with less than 
6  mm (0.24 inch.) curl, and should not contain air.
-Co
ndition:  Envelopes should not be wrinkled, nicked, either damaged.
-Tem
perature:  Use envelopes that are com patibl e with the heat and 
pressure of the machine during operation.
• Use only wel
 l-constructed envelopes wi th sharp-and well-creased folds.
• Do not use sta
 mped envelopes.
• Do not use envel
 opes with clasps, snaps, windows, coated lining, 
self-adhesive seals, or other synthetic materials.
• Do not use damag
 ed or poorly made envelopes.
• Be su
re the seam at both ends of the envelope extends all the way to 
the corner of the envelope.
21
1Acceptable
2Unacceptable
• Envelopes with a peel-off adhesive strip  or with more than one flap that 
folds over to seal must use adhesives compatible with the machine’s 
fusing temperature about 170°C (338 °F) for 0.1 second. The extra flaps 
and strips might cause wrinkling,  creasing, or jams and may even 
damage the fuser.
• For the best print qual
 ity, position margins no closer than 15  mm (0.59 
inch.) from th
e edges of the envelope.
• Avo
id printing over the area where the envelope’s seams meet.
Transparencies
To avoid damaging the machine, use only transparencies designed for laser 
printers.
 In case of color printing using transparencies, the picture quality would 
be lower than mono printing when the printouts are used on the  overhead projector.
•
Transparencies used in the machine must be able to withstand 
machine’s fusing temperature.
• Pl
ace them on a flat surface afte r removing them from the machine.
• D
o not leave unused transparencies in  the paper tray for long periods of 
time. Dust and dirt may accumulate on them, resulting in spotty printing.
• T
o avoid smudging caused by finge rprints, handle transparencies 
carefully.
• T
o avoid fading, do not expose pr inted transparencies to prolonged 
sunlight.
• En
sure that transparencies are not wrinkled, curled, or have any torn 
edges.
• D
o not use transparencies that separate from the backing sheet.
•T
o prevent transparencies from sticki ng to each other, do not let the 
printed sheets stack up as they are begin printed out. 
• R
ecommended media:  Xerox 3R91331 (A4), Xer ox 3R2780 (Letter)
Base type transparency (ex.  Xer
 ox 3R91331) results in better image 
and paper handling quality than paper backed (ex.  Xerox 3R3028) or 
removable stripe ( 3R3108) ones.
 
•Transparency with static electricity can cause image quality 
problems. 
• Depe
nding on the selection or storage conditions of the transparency, 
jam or image scratch might occur.
Labels
To avoid damaging the machine, use only labels designed for use in laser 
machines.
•When selecting labels, consider the following factors:
-Ad
hesives:  The adhesive material should be stable at your machine’s 
fu
sing temperature (about 170°C (338 °F)).
- Ar
rangement:  Only use labels with no exposed backing between 
th
em. Labels can peel off sheets that have spaces between the 
labels, causing serious jams.
- Curl:  Prior to printing, labels must lie flat with no more than 13  mm 
(0.51 inch.) of 

curl in any direction.
- Cond
ition:  Do not use labels with wrinkl es, bubbles, or other 
indications of separation.
• Make
 sure that there is no exposed adhesive material between labels. 
Exposed areas can cause labels to  peel off during printing, which can 
cause paper jams. Exposed adhesive can also cause damage to 
machine components.
Downloaded From ManualsPrinter.com Manuals 
						

							Media and tray_ 58
•Do not run a sheet of labels through the machine more than once. The 
adhesive backing is designed for only a single pass through the 
machine.
• Do 
not use labels that are separating from the backing sheet or are 
wrinkled, bubbled, or otherwise damaged.
Card stock/Custom-sized paper
•Do not print on media smaller than 76  mm (3.00 inches) wide or 
152
.4  mm (6.00 inches) long.
• In
 software applications, set margins at least 6.4  mm (0.25 inches) away 
from the edg
es of the material.
Letterhead/Preprinted paper
Single-sideddouble-sided
Face up
AAAAA
Face down
AAAAA
• Letterhead/ Preprinted paper must be pr inted with heat-resistant ink that 
will not melt, vaporize, or release hazardous emissions when subjected 
to the machine’s fusing temperature for 0.1 second. Check your 
machine’s specification to view t he fusing temperature about 170°C (338 
°F).
• Letterhea
 d/ Preprinted paper ink mu st be non-flammable and should not 
adversely affect machine rollers.
• Forms and
  letterhead should be sealed in a moisture-proof wrapping to 
prevent changes during storage.
• Before you loa
 d letterhead/preprinted paper, verify that the ink on the 
paper is dry. During the fusing process, wet ink can come off preprinted 
paper, reducing print quality.
Recycled paper
When loading recycled paper, printed side should be facing up with an 
uncurled edge at the front. If you expe rience problems with paper feed, turn 
the paper around. Note that print quality is not guaranteed.
• Recycled
  paper must be printed with heat -resistant ink that will not melt, 
vaporize or release hazardous emissions when subjected to the 
machine’s fusing temperature for 0.1 second. Check your machine’s 
specification to view the fusing  temperature about 170°C(338 °F). 
• Recycled
  paper ink must be non-flammable and should not adversely 
affect machine rollers.
• Before you loa
 d recycled paper, verify that the ink on the paper is dry. 
During the fusing process, wet  ink can come off recycled paper, 
reducing print quality.
Glossy photo
 Load one paper in  the tray at a time, glossy side facing up. 
• R
ecommended media: Glossy paper (Letter) for this machine by  HP 
Brochure Paper  (Product: Q6611A).
• R
ecommended media: Glossy paper (A4) for this machine by  HP 
Superior Paper 160 glossy  (Product: Q6616A).
Matte photo
 Load one paper in the tray at a time, side to be printed facing up. 
Setting the paper size and type
After loading paper in the paper tray, you need to set the paper size and 
type using the printer driver. Follow these steps to make your changes 
permanent.
 The following procedure is for Windows XP. For other Windows OS, 
refer to the corresponding Windows Users Guide or online help. 
1. Click the  Start b
 utton on the computer screen.
2. Select  Pr
 inters and Faxes .
3. R
ight-click on the printer icon and select  Printing Preferences.
4. Click the  Paper tab
  and change the setting on  Paper Options.
5. Click  OK.
Using the output support
The printed pages stack on the output tray, and the output support will help 
the printed pages align.
1Output support
 If you continuously print many pages, the surface of the output tray 
may become hot. Be careful not to  touch the surface, and especially 
keep children away from the surface.
Downloaded From ManualsPrinter.com Manuals 
						

							Printing_ 59
7.printing
This chapter explains common printing tasks.
This chapter includes:
•Introducing useful software program
• Printer driver features
• Basic printing
• Opening printing preferences
• Using help
• Using special print features •
Changing the default print settings
• Setting your machine as a default machine
• Printing to a file (PRN)
• Macintosh printing
• Linux printing
  
 The procedures in this chapter are mainly based on Windows XP.
Introducing useful  software program
Samsung AnyWeb Print
This tool helps you to screen-capture,  preview, scrap and print the screen of 
Windows Internet Explorer more easily, when you use the ordinary program. 
Click  Start > All programs  > Samsung Printers  > Samsung AnyWeb 
Print  > Download the latest version  to link the website where the tool is 
available for the download. This tool is available only for Windows operating 
systems.
Samsung Easy Color Manager
This program helps users to adjust co lor as they like. You can adjust the 
printout color as they see them on the monitor. The adjusted color can be 
stored on the printer driver and  applied to printouts. Click Start > All 
programs  > Samsung Printers  > Samsung Easy Color Manager > 
Download the latest version  to link the website where the 
 tool is available 
for the download. This tool is avai l
 able only for Windows and Macintosh 
operating systems. 
(http://solution.samsungprinte r.com/p
 ersonal/colormanager)
Printer driver features
Your printer drivers support the following standard features:
•Paper orie
 ntation, size, source, and media type selection
• Number of co
 pies
In addition, you can use various special printing features. The following 
tab
 le shows a general overview of fe atures supported by your printer 
drivers:
 Some models or operating systems may not support some of the 
feature(s) in the following table.
Printer driver
FeatureWindows
Print quality option ●
Poster printing ●
Multiple pages per sheet  ●
Booklet printing (manual) ●
Fit to page printing ●
Reduce and enlarge printing ●
Watermark ●
Overlay ●
Double-sided printing (manual) ●
(  ●: 
Supported, Blank: Not supported) 
Basic printing
Your machine allows you to print from various Windows, Macintosh, or 
Linux applications. The exact steps for printing a document may vary 
depending on the application you use.
 •Your  Printing Preferences  window that appears in this user’s guide 
may differ depending on the machine in use. However, the 
composition of the  Printing Preferences  window is similar. Check 
the operating system(s) that are compatible with your machine. 
Refer to the OS compatibility secti on of Printer Specifications (See 
System requirements on page  29).
• Whe
n you select an option in  Printing Preferences, you may see a 
warning mark, 
, or . An exclamation mark () means you 
can select that certain option but  it 
 is not recommended, and () 
mark means you cannot select that option due to the machine’s 
se
 ttings or environment.
The following procedure describes the general steps required for printing 
from 
 various Windows applications. 
 Macintosh basic  printing, see Macintosh printing on page  65.
Linux basic printing, see  Linux printing on page 66.
The following  Printin
 g Preferences window is for Notepad in Windows XP. 
Your  Printing Preferences  window may differ, depending on your 
operating system or the ap plication you are using. 
Downloaded From ManualsPrinter.com Manuals 
						

							Printing_ 60
1.Open the document you want to print.
2. Select  Print from 
 the File  menu. The  Print window appears. 
3. Select y
 our machine from the  Select Printer list.
You can select the basic print setti ngs including the number of copies 
and the print range from the  Print window. 
 To take advantage of the printer features provided by your printer 
driver, click  Properties or  Preferences in the application’s  Print 
window to change the print setting (See  Opening printing 
preferences on page  60 ).
4. To start the prin
 t job, click OK or Print  in the  Print window.
 If you are using Windows Internet Explorer, the  Samsung AnyWeb 
Print  too will save your time for screen-captured images or printing 
the image. Click Start  > All programs  > Samsung Printers  > 
Samsung AnyWeb Print  to link the website where the tool is 
available for the download.
Canceling a print job
If the print job is waiting in a print queue or print spooler, cancel the job as 
follows.
1. Click th
e Windows Start  menu.
2. For Wi
ndows 2000, select  Settings > Printers .
• F
or Windows XP/Server 2003, select  Printers and Faxes. 
• F
or Windows Server 2008/Vista, select  Control Panel > Hardware 
and Sound  > Printers . 
• For Windows 
 7, select Control Panel  > Devices and Printers . 
• F
or Windows Server 2008 R2, select  Control Panel > Hardware  > 
Devices and Printers . 
3. For Wi
ndows 2000, XP, Server 2003, Vista and Server 2008, 
double-click your machine.
For Windows 7 and Windows Server 2008 R2, right-click your printer 
icon >
  context menus >  See what’s printing .
 If See what’s printing  item has a ► mark, you can select other 
printer drivers connected with selected printer.
4. From th
 e Document  menu, select Cancel .
 You can also access this window by simply double-clicking the 
machine icon (
) in the Windows task bar. 
You can also cancel the current job by pressing  Ca
 ncel () button on 
the control panel.
Opening printing preferences
You can preview the settings you se lected on the upper right of the Printing 
Preferences .
1. Op
en the document you want to print.
2.Select  Print from the  Fil
 e menu. The  Print window appears. 
3. Se
lect your machine from the  Select Printer. 
4. Click  Pr
 operties or Preferences . 
Using a favorite setting
The Presets  option, which is visible on each of the preferences tab except 
for the Samsung  tab, allows you to save the  current preferences for future 
use.
To save a  Prese
 ts item:
1. C
hange the settings as  needed on each tab. 
2. En
ter a name for the item in the  Presets input box.
Downloaded From ManualsPrinter.com Manuals