Samsung Dcs 400si General Description Manual

CONTENTS
4.2.1
STATION FEATURES
ADD-ON MODULESPRIVACY RELEASE
APPOINTMENT REMINDERPROGRAMMABLE KEYS
AUTOMATIC HOLDPROGRAMMED STATION MESSAGES
AUTOMATIC PRIVACYPROTECTION FROM BARGE-IN
BACKGROUND MUSICPULLOUT DIRECTORY TRAY
BUSY STATION CALLBACKPULSE TO TONE SWITCHOVER
BUSY STATION INDICATIONS (BLF)REDIAL
CALL FORWARDINGAUTO RETRY
CALL LOGLAST NUMBER
CALL PICKUPMANUAL RETRY WITH LNR
DIRECT STATION SELECTION (DSS)MEMO REDIAL
DO NOT DISTURB (PROGRAMMABLE)SAVE NUMBER
DOOR LOCK RELEASEREMOTE HOLD
EXCLUSIVE...

CONTENTS
APPOINTMENT REMINDER
Keysets with an alarm key can be used like an alarm clock. When programmed for
a specific time, the keyset will sound a distinctive ring to remind the user of meet-
ings or appointments. Alarms can be set for “today only” or for every day at the
same time. Up to three alarms may be set at each keyset. Display keysets can also
show a programmed message when the alarm rings.
AUTOMATIC HOLD
Station users can enable or disable automatic hold at their keysets. While a user is...

CONTENTS
4.2.3
In addition to the three usual methods of forwarding described above, a \
fourth 
option called Follow Me is available. This option allows a station user \
to set a
Forward All condition from his/her station to another station while at t\
he remote
station. To display the Follow Me condition, the TRSF key lights steady red at the
station that is forwarded. The TRSF key also lights if Forward All is se\
t and no key
is programmed for Forward All. 
Keyset users can be given an external call...

CONTENTS
4.2.4
GROUP LISTENING
This feature allows users to turn on the speaker while using the handset. It allows
a group of people to listen to the distant party over the speaker without the micro-
phone turned on.
HEADSET OPERATION
Every keyset can be programmed to allow the use of a headset. In the headset
mode, the hookswitch is disabled and the ANS/RLS key is used to answer and
release calls. Keyset users may turn headset operation ON/OFF by keyset pro-
gramming or more easily by pressing the...

CONTENTS
4.2.5
MUTE MICROPHONE/HANDSET
Any keyset user can mute the keyset’s handset transmitter by pressing the MUTE
key. In addition, keyset users can also mute the keyset microphone while the keyset
is in speakerphone mode.
OFF-HOOK RINGING
When a keyset is in use, the system will provide an off-hook ring signal to indicate
that another call is waiting. The ring signal is a single ring repeated. The interval is
controlled by a system-wide timer. Single line stations will receive a tone burst
through...

CONTENTS
4.2.6
PROGRAMMABLE KEYS
LCD 24B and STD 24B keysets have 24 programmable keys and LCD 12B and
Basic 12B keysets have 12. Each key can be programmed for more than 25 differ-
ent uses to personalize each phone. Examples of keys include individual outside
line, individual station, group of lines, group of stations and one touch speed dial
buttons. Using these keys eliminates dialing access codes.
The following feature keys have extenders that make them more specific: SPEED
DIAL, SUPERVISOR, PAGE,...

CONTENTS
4.2.7
•MANUAL RETRY with LNR—When you make an outside call and receive a
busy signal you can press the LNR key to redial the same number again. This
operation can be manually repeated for a limited number of attempts as defined
by system programming (available to keyset users only).
•MEMO REDIAL—When you are calling directory assistance you can store the
number you are given using the dial pad and SAVE number feature. There is no
need for a pencil and paper (available to keyset users only)....

CONTENTS
TRI-COLORED LIGHTS
LCD 24B and STD 24B keysets have 16 keys equipped for tri-colored LED
indications (green, red and amber). LCD 12B and Basic 12B models have six of
these keys and 7B keysets have three. To avoid confusion, your calls always light
green, other calls show red, and recalls light amber.
VOLUME SETTINGS
Each keyset user may separately adjust the volume of the ringer, speaker, handset
receiver, background music, page announcement and off-hook ring tone.
WALL-MOUNTABLE KEYSETS
Each...

CONTENTS
DISPLAY FEATURES
ACCOUNT CODE DISPLAYENHANCED STATION PROGRAMMING
CALL DURATION TIMERIDENTIFICATION OF RECALLS
CALL FOR GROUP IDENTIFICATIONIDENTIFICATION OF TRANSFERS
CALL PROCESSING INFORMATIONMESSAGE WAITING CALLER NUMBER
CALLER ID/ ANI INFORMATIONOUTSIDE LINE IDENTIFICATION
CALLING PARTY NAMEOVERRIDE IDENTIFICATION
CALLING PARTY NUMBERPROGRAMMED MESSAGE DISPLAY
CONFERENCE INFORMATIONSOFT KEYS
DATE AND TIME DISPLAYSTOPWATCH TIMER
DIAL BY NAMETEXT MESSAGING
DIALED NUMBERUCD SUPERVISOR...

CONTENTS
NEXT CALL
In the event that there is a call waiting or a camped-on call at the user’s keyset, the
user can press the NEXT key to display the Caller ID information associated with
the next call in queue at the station. Either the CID name or CID/ANI number will
show in the display depending on the N/N selection.
SAVE CID/ANI NUMBER
At any time during an incoming call that provides CID information, the user may
press the SAVE key. This saves the CID number in the Save Number feature.
Pressing the...