Samsung Galaxy S8+ User Manual

							Learn about your mobile 
device hardware, assembly 
procedures, and how to get 
started using your new device.
Getting Started  
						

							 5
Introduction
The following topics describe the basics of using this 
guide and your new phone.
About the User Guide
Thank you for purchasing the Samsung Galaxy S8/S8+. 
The following topics explain how best to use this guide 
to get the most out of your phone.
Before Using Your Phone
Read the Get Started guide and Important Information 
booklet that were packaged with your phone 
thoroughly for proper usage.
Accessible services may be limited by subscription 
contract conditions.
Descriptions in the User Guide
Note that most descriptions in this guide are based 
on your phone’s setup at the time of purchase. 
Unless otherwise noted, instructions begin from 
the phone’s home screen, which is displayed by 
tapping 
 Home. Some operation descriptions may 
be simplified.
Screenshots and Key Labels
Screenshots and other illustrations in this user guide 
may appear differently on your phone. Key labels in the 
user guide are simplified for description purposes and 
differ from your phone’s display.
Other Notations
In the user guide, the phone may be referred to 
either as “phone,” “device,” or “handset.” A microSD™, 
microSDHC™, or microSDXC™ card is referred to as an 
“SD card” or a “memory card.” 
						

							Set Up Your Device
Learn how to set up your device for the first time.  
						

							Set Up Your Device7
Assemble Your Device
This section helps you to assemble your device.
Install the SIM Card and a 
Memory Card
When you subscribe to a cellular network, you are 
provided with a plug-in SIM card. During activation, 
your SIM card is loaded with your subscription details, 
such as your Personal Identification Number (PIN), 
available optional services, and other features.
Warning: Please be careful when handling the SIM card 
to avoid damaging it. Keep all SIM cards out of reach of 
small children.
You can also install an optional microSD
™, microSDHC™, 
or microSDXC™ memory card (not included) to add more 
memory space to your device. A memory card can be 
installed at any time. It is not necessary to install it 
prior to using the device. Note
: Your phone’s SIM card is preinstalled. These 
instructions are for reference only.
Caution : Exercise care when using the removal tool to 
eject the internal SIM card/Memory card tray.
1. Insert the removal tool into the hole on the 
SIM card/Memory card tray, and then push until the 
tray pops out.
2. Place the SIM card on the tray.
• Make sure that the card’s gold contacts face 
down into the device and that the card is 
positioned as shown.
3. Place the memory card on the tray with the gold 
contacts facing down.  
						

							Set Up Your Device8
4. Slide the SIM card/Memory card tray back into 
the slot.
Note : Your device is IP68 rated for dust and water 
resistance. To maintain the water-resistant and 
dust‑resistant features of your device, make sure 
that the SIM card/Memory card tray openings are 
maintained free of dust and water, and the tray is 
securely inserted prior to any exposure to liquids. For 
more information, refer to “Maintaining Water and Dust 
Resistance” on page  259.
Charge the Battery
Note : You should dry the inside of the charging port 
before inserting a power connector to charge your 
device. If the charging port is not fully dry, your device 
may operate abnormally. For example, it may charge 
more slowly or overheat. For more information, refer to 
“Maintaining Water and Dust Resistance” on page  259. 
Your device is powered by a rechargeable, standard 
Li-Ion battery. A USB charger (charging head and USB 
cable) is included with the device for charging the 
battery from any standard outlet.
The battery comes partially charged. You can use the 
device while charging.
Note : For fastest charging times, use the Adaptive 
Fast Charger that came with your device. This charger 
provides faster charging only when connected to 
devices that support Adaptive Fast Charging.  
						

							Set Up Your Device9
1. Insert the USB cable into the USB charger/
Accessory port.
Caution: Use only charging devices and batteries 
approved by Samsung. Samsung accessories are 
designed for your device to maximize battery life. Using 
other accessories may invalidate your warranty and 
may cause damage.
2. Connect the USB cable to the charging head, and 
then plug the charging head into a standard outlet.
3. Unplug the charging head from the outlet and 
remove the USB cable from the device when 
charging is complete.
Note : This device is also compatible with wireless 
charging devices approved by Samsung, which are 
sold separately.
When to Charge the Battery
When the battery is low and only a few minutes of 
operation remain, the device sounds a warning tone at 
regular intervals.
In this condition, your device conserves its remaining 
battery power by dimming the screen.
When the battery level becomes too low, the device 
automatically turns off.
For a quick check of your battery level:
 ► View the battery charge indicator located in the top 
right corner of your device’s display. A solid color  
( 
 ) indicates a full charge.  
						

							Set Up Your Device10
You can also choose to display a percentage value. 
Viewing a percentage value can provide a better idea 
of the remaining charge on the battery. For more 
information, see “Battery” on page  212.
While charging, the device and the charger may 
become hot when using wireless charging or fast 
charging. This does not affect the device’s lifespan or 
performance and is in the device’s normal range of 
operation. 
The charger may stop charging if the battery becomes 
too hot. If the device heats up while charging the battery:
1. Disconnect the charger from the device and close 
any running apps.
2. Wait for the device to cool down, and then begin 
charging the device again.
• If the lower part of the device overheats, 
check for damage to the connected USB cable. 
Replace the damaged USB cable with a new 
Samsung-approved cable.
If using a wireless charger, do not place foreign 
materials between the device and the wireless charger.
Micro-USB Connector
You can use the included Micro-USB connector to 
connect a Micro-USB cable (such as from your old 
device) to your new device for charging with the 
charging head, or for connecting to a computer.  
						

							Set Up Your Device11
Note: The Micro-USB connector does not support 
On‑the‑Go (OTG) devices such as memory sticks, 
external hard drives, or keyboard and mouse 
accessories.
Reverse Charging
The included USB connector allows you to charge 
another device through a USB cable. 
You can also use the USB connector for transferring 
contacts, photos, and other content from an old device. 
For more information, see  “Transfer Data from Your Old 
Device” on page  17. 
Start Using Your Device
Turn Your Device On or Off
The instructions below explain how to turn your device 
on or off.
To turn the device on:
 ►Press and hold the Power  key until the device 
turns on.
To turn the device off:
1. Press and hold the Power  key until the 
Device options menu is displayed.
2. Tap  Power off , and confirm if prompted.  
						

							Set Up Your Device12
Lock or Unlock Your Device
Use your device’s screen lock features to secure your 
device.
By default, the device locks automatically when the 
screen times out.
To lock the device:
 ►Press the  Power key.
The default Screen lock on your device is Swipe. To 
choose a more secure screen lock, see “Set a Screen 
Lock” on page  224.
To unlock the device:
 ► Press the  Power key or double‑tap  Home, and 
then drag your finger across the screen.
Restart the Device
If your device stops responding to taps or finger 
gestures and you are unable to turn it off, you can 
restart your device. 
 ► Press and hold the Power  key and the 
Volume down key at the same time for more than 
seven seconds.
Set Up Your Device
Use the Set Up Wizard
The first time you turn your device on, a Welcome 
screen is displayed. It guides you through the basics of 
setting up your device.
Follow the prompts to choose a default language, 
connect to a Wi-Fi
® network, set up accounts, choose 
location services, learn about your device’s features, 
and more.
Note : On the Welcome screen, there may be an 
Accessibility button. If you are visually impaired or hard 
of hearing, tap  Accessibility to change the accessibility 
settings.  
						

							Set Up Your Device13
Google Account
Your new device uses your Google™ Account to fully 
utilize its Android™ features, including Gmail™, 
Google Duo, and the Google Play™ store.
When you turn on your device for the first time, set 
up your existing Google Account or create a new 
Google Account.
– or –
To create a new Google Account or set up your 
Google Account on your device at any time, use 
Accounts settings. 
1. From home, swipe up to access Apps .
2. Tap  Settings > Cloud and accounts >  Accounts.
3. Tap  Add account >  Google.
Factory Reset Protection
When you sign in to a Google Account on your device, 
Factory Reset Protection is activated. Factory Reset 
Protection (FRP) prevents other people from using 
your device if it is reset to factory settings without your 
permission. For example, if your device is lost or stolen 
and a factory data reset is performed, only someone 
with your Google Account username and password can 
use the device.
You will not be able to access the device after a factory 
data reset if you do not have your Google Account 
username and password. For more information, see 
“Factory Data Reset” on page  219.
Caution : Before shipping your device back to Samsung 
or taking it to your nearest Samsung‑authorized service 
center, you should remove your Google Account before 
resetting the device back to factory settings. For more 
information, visit  samsung.com/us/support/frp .