Samsung HP-R6372 Plasma Display User Manual
Have a look at the manual Samsung HP-R6372 Plasma Display User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
91 Note Both screen position and size will vary, depending on the type of PC monitor and its resolution. The table below shows all of the display modes that are supported: • The interlace mode is not supported. • The TV operates abnormally if a non-standard video format is selected. • The table above conforms to IBM/VESA regulations and is based on using the Analog Input. Notes • The PC text quality is optimum in WXGA mode (1360 x 768@60Hz). • When this TV is used as a PC display, 32-bit color is supported. • Depending on the manufacturer, your PC display screen might appear different. (and depending on your particular version of Windows.) Check your PC instruction book for information about connecting your PC to a TV. • If a vertical and horizontal frequency-select mode exists, select 60Hz (vertical) and 48.4KHz (horizontal). • In some cases, abnormal signals (such as stripes) might appear on the TV screen when the PC power is turned off (or if the PC is disconnected). If so, press the SOURCE button on the remote control or SOURCE button on the front panel to enter the VIDEO mode. Also, make sure that the PC is connected. Video Signal IBM PC / AT CompatibleResolution (Dot X Line)Vertical Frequency (Hz) 640 X 350 720 X 400 640 X 480 800 X 600 1024 X 768 1280 X 720 1360 X 76870.086 70.087 59.940 70.000 72.809 75.000 56.250 60.317 70.000 72.188 75.000 60.004 70.069 72.000 75.029 59.855 60.015Horizontal Frequency (KHz) 31.469 31.469 31.469 35.000 37.861 37.500 35.156 37.879 43.750 48.077 46.875 48.363 56.476 57.672 60.023 44.772 47.712Vertical Polarity P N N N/P N N N/P P N/P P P N N N/P P P PHorizontal Polarity N P N N/P N N N/P P N/P P P N N N/P P N P BN68-00825N-01Eng_(086~119) 9/28/05 9:22 AM Page 91
92 After connecting the TV to your PC, adjust the position of the screen if it is not well-aligned. Preset: • Press the SOURCE button to select “PC.” 1 Press the MENU button. Press the or button to select “Setup”, then press the ENTER button. 2 Press the or button to select “PC”, then press the ENTER button. 3 Press the or button to select “Position”, then press the ENTER button. 4 Adjust the position of screen by pressing the //œ/√button. 5 Press the EXIT button to exit. Changing the Position of the Image Plug & Play√Language : English√Time√V-Chip√Caption√Menu Transparency : Medium√ †More SetupTV MoveEnterReturn Image Lock√Position√Auto Adjustment Image Reset PCTV MoveEnterReturn PositionTV MoveEnterReturn PositionTV MoveEnterReturn BN68-00825N-01Eng_(086~119) 9/28/05 9:22 AM Page 92
93 Plug & Play√Language : English√Time√V-Chip√Caption√Menu Transparency : Medium√ †More SetupTV MoveEnterReturn Picture Quality Adjustment Picture Automatic Adjustment Preset: • Press the SOURCE button to select “PC”. 1 Press the MENU button. Press the or button to select “Setup”, then press the ENTER button. 2 Press the or button to select “PC”, then press the ENTER button. 3 Press the or button to select “Auto Adjustment”, then press the ENTER button. The message “Auto Adjustment in progress. Please wait.” appears on the screen and the picture adjustments are automatically activated. Image Lock√Position√Auto Adjustment Image Reset PCTV MoveEnterReturn Auto Adjustment in progress. Please wait. BN68-00825N-01Eng_(086~119) 9/28/05 9:22 AM Page 93
Coarse Adjustment Preset: • Press the SOURCE button to select “PC”. 1 Press the MENU button. Press the or button to select “Setup”, then press the ENTER button. 2 Press the or button to select “PC”, then press the ENTER button. 3 Press the ENTER button to select “Image Lock”. 4 Press the ENTER button again to select “Coarse”. Remove picture noise (vertical stripes) on the screen by pressing the œ or√button. (If Coarse is not set properly, vertical stripes will appear on the screen.) • Press the or button to select another item. 5 Press the EXIT button to exit. 94 Image Lock√Position√Auto Adjustment Image Reset PCTV MoveEnterReturn Coarse 50 Fine 0 Image LockTV MoveEnterReturn Coarse50 Plug & Play√Language : English√Time√V-Chip√Caption√Menu Transparency : Medium√ †More SetupTV MoveEnterReturn BN68-00825N-01Eng_(086~119) 9/28/05 9:22 AM Page 94
Fine Tuning (Fine) Preset: • Press the SOURCE button to select “PC”. 1 Press the MENU button. Press the or button to select “Setup”, then press the ENTER button. 2 Press the or button to select “PC”, then press the ENTER button. 3 Press the ENTER button to select “Image Lock”. 4 Press the or button to select “Fine”, then press the ENTER button. Remove picture noise on the screen by pressing the œ or√button. (If Fine is not set properly, noise will appear on the screen.) • Press the or button to select another item. 5 Press the EXIT button to exit. 95 Image Lock√Position√Auto Adjustment Image Reset PCTV MoveEnterReturn Coarse 50 Fine 0 Image LockTV MoveEnterReturn Fine0 Plug & Play√Language : English√Time√V-Chip√Caption√Menu Transparency : Medium√ †More SetupTV MoveEnterReturn BN68-00825N-01Eng_(086~119) 9/28/05 9:22 AM Page 95
96 Image Reset Preset: • Press the SOURCE button to select “PC”. 1 Press the MENU button. Press the or button to select “Setup”, then press the ENTER button. 2 Press the or button to select “PC”, then press the ENTER button. 3 Press the or button to select “Image Reset”, then press the ENTER button. The message “Image Reset is completed.” appears on the screen. • The previously adjusted settings will be reset to the factory defaults. Image Lock√Position√Auto Adjustment Image Reset PCTV MoveEnterReturn Image Reset is completed. Plug & Play√Language : English√Time√V-Chip√Caption√Menu Transparency : Medium√ †More SetupTV MoveEnterReturn BN68-00825N-01Eng_(086~119) 9/28/05 9:22 AM Page 96
PLASMA DISPLAY PANEL Time Setting Setting the Clock .......................................................................98 Setting the On/Off Timer .........................................................100 Setting the Sleep Timer ............................................................101 BN68-00825N-01Eng_(086~119) 9/28/05 9:22 AM Page 97
Setting the Clock Setting the clock is necessary in order to use the various timer features of the TV. Also, you can check the time while watching the TV. (Just press the INFO button.) 98 Option 1: Setting the Clock Manually 1 Press the MENU button. Press the or button to select “Setup”, then press the ENTER button. 2 Press the or button to select “Time”, then press the ENTER button. Press the ENTER button to select “Clock”. 3 Press the ENTER button to select “Clock Mode”. Press the or button to select “Manual”, then press the ENTER button. 4 Press the or button to select “Clock Set”, then press the ENTER button. 5 Press the œor √button to move to “Month”, “Day”, “Year”, “Hour”, “Minute”, or “am/pm”. Set the clock you want by pressing the or button, then press the ENTER button. 6 Press the EXIT button to exit. Notes • The current time will appear every time you press the INFO button. • You can set the Month, Day, Year, Hour and Minute directly by pressing the number buttons on the remote control. --/--/----/--:-- -- Clock√Sleep Timer : Off√On Timer : Off√Off Timer : Off√ TimeTV MoveEnterReturn Clock Mode : Manual√Clock Set√Time Zone√DST : No√ ClockTV MoveEnterReturn Set current date and time. Clock SetTV MoveAdjustReturn Month Day Year Hour Minute am/pm… †---- ---- -- -- -- Plug & Play√Language : English√Time√V-Chip√Caption√Menu Transparency : Medium√ †More SetupTV MoveEnterReturn BN68-00825N-01Eng_(086~119) 9/28/05 9:22 AM Page 98
99 Option 2: Setting the Clock Automatically The Clock can be set automatically if you are receiving a digital signal. 1 Press the MENU button. Press the or button to select “Setup”, then press the ENTER button. 2 Press the or button to select “Time”, then press the ENTER button. Press the ENTER button to select “Clock”. 3 Press the ENTER button to select “Clock Mode”. Press the or button to select “Auto”, then press the ENTER button. 4 Press the or button to select “Time Zone”, then press the ENTER button. Press the or button to highlight the time zone for your local area (and to move the highlight to the appropriate time zone on the map of the United States), then press the enter button. 5 Press the or button to select “DST” (Daylight Saving Time), then press the ENTER button. Press the or button to select “Yes” or “No”, then press the ENTER button. 6 Press the EXIT button to exit. Note • Depending on the broadcast station and signal, the auto time may not be set correctly. If this occurs, set the time manually. 99 --/--/----/--:-- -- Clock√Sleep Timer : Off√On Timer : Off√Off Timer : Off√ TimeTV MoveEnterReturn Clock Mode : Auto√Clock Set√Time Zone√DST : No√ ClockTV MoveEnterReturn ClockTV MoveEnterReturn Clock Mode : Auto Clock Set Time Zone DST :No Plug & Play√Language : English√Time√V-Chip√Caption√Menu Transparency : Medium√ †More SetupTV MoveEnterReturn Ye s No Select the time zone in which you live. Time Zone Eastern Central Mountain Pacific Alaska Hawaii EnterReturnMove BN68-00825N-01Eng_(086~119) 9/28/05 9:23 AM Page 99
100 1 Press the MENU button. Press the or button to select “Setup”, then press the ENTER button. 2 Press the or button to select “Time”, then press the ENTER button. Press the or button to select “On Timer”, then press the ENTER button. Press the or button to adjust “Hour”, then press the √button to move to the next step. Set other items using the same method as above. To activate “On Timer” with the setting entered, set Activation to “Yes” by pressing …or † button. When finished, press the MENU button to return. • The current time will appear every time you press the INFO button. • You can set the hour and minute directly by pressing the number buttons on the remote control. 3 Press the or button to select “Off Timer”, then press the ENTER button. Press the or button to adjust “Hour”, then press the √button to move to the next step. Set other items using the same method as above. To activate “Off Timer” with the setting entered, set Activation to “Yes” by pressing …or † button. When finished, press the ENTER button. 4 Press the EXIT button to exit. Note •Auto Power Off When you set the timer “On”, the television will eventually turn off, if no controls are operated for 3 hours after the TV was turned on by the timer. This function is only available in timer “On” mode and prevents overheating or leakage, which may occur if a TV is on for too long (when you are on vacation, for example). Setting the On/Off Timer 1/1/2005/12:00 am Clock√Sleep Timer : Off√On Timer : Off√Off Timer : Off√ TimeTV MoveEnterReturn Set on timer. On TimerTV MoveAdjustReturn Set off timer. Off TimerTV MoveAdjustReturn Hour Minute am/pm Antenna Channel Volume Activation… †1200amAir 310No Hour Minute am/pm Activation… †1200amNo Plug & Play√Language : English√Time√V-Chip√Caption√Menu Transparency : Medium√ †More SetupTV MoveEnterReturn BN68-00825N-01Eng_(086~119) 9/28/05 9:23 AM Page 100