Home > Samsung > Display > Samsung HP-R6372 Plasma Display User Manual

Samsung HP-R6372 Plasma Display User Manual

Add to Favourites
    Download as PDF Print this page Share this page

    Have a look at the manual Samsung HP-R6372 Plasma Display User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    View all the pages
    Page
    of 148
    Add page 51 to Favourites
    image text
    Enable zoom 
    							1
Press the MENU button. Press the or button to select
“Picture”, then press the ENTER button.
2
Press the ENTER button to select “Mode”.
3
Press the ENTER button.
Press the or  button to select the desired picture 
mode (Dynamic, Standard, Movie, Custom), then press 
the ENTER button.
4
Press the or button to select a particular option 
(Contrast, Brightness, Sharpness, Color, or Tint), then 
press the ENTER button.
Press the œor √button to decrease or increase the 
value of a particular item.
•  You can also select these options (Contrast, 
Brightness, Sharpness, Color, or Tint) by pressing 
the or button.
Notes
• “Tint” doesn’t operate in PC, HDMI or any Component mode.
• The Tint cannot be adjusted while watching Digital TV.
Customizing the Picture Settings
You can use the on-screen menus to change the “Contrast”, “Brightness”, “Sharpness”, “Color”,
“Tint”, and “Color Tone” according to personal preference. You can select “Standard” which
automatically recalls your personalized picture settings.
51
ModeTV
MoveEnterReturn
Mode : Dynamic√Contrast     100
Brightness 45
Sharpness 75
Color 55
Tint       G 50 R 50
Color Tone : Cool2
√Reset
ModeTV
MoveEnterReturn
Mode : Custom√Contrast     80
Brightness 50
Sharpness 50
Color 50
Tint       G 50 R 50
Color Tone : Normal
√Reset
Mode : Dynamic√Size : 16:9√Digital NR  : On√DNIe Demo : Off√My Color Control√Dynamic Contrast  : Off√
†More
PictureTV
MoveEnterReturn
Mode : Dynamic
Contrast     100
Brightness 45
Sharpness 75
Color 55
Tint       G 50 R 50
Color Tone : Cool2
Reset
ModeTV
MoveEnterReturn
Dynamic
Standard
Movie
Custom
➤ ➤Quick way to access the picture setting: Just press “P.MODE” button
on the remote control.
Contrast80
BN68-00825N-01Eng_(048~065)  9/28/05  9:13 AM  Page 51
    Add page 52 to Favourites
    image text
    Enable zoom 
    							52
5
Press the ENTER button to return to “Mode”.
Press the or button to select “Color Tone”, then 
press the ENTER button.
6
Press the or button to select a particular option
(Cool2, Cool1, Normal, Warm1, or Warm2), then press 
the ENTER button.
Press the EXIT button to exit.
Resetting the Picture Settings to the Factory Defaults
7
To return the factory defaults, select “Reset” by pressing
the or button. 
Press the ENTER button.
• The previously adjusted settings will be reset to the 
factory defaults.
ModeTV
MoveEnterReturn
Mode : Custom√Contrast     80
Brightness 50
Sharpness 50
Color 50
Tint       G 50 R 50
Color Tone : Normal
√Reset
ModeTV
MoveEnterReturn
Mode : Custom√Contrast     80
Brightness 50
Sharpness 50
Color 50
Tint       G 50 R 50
Color Tone : Normal
√Reset
ModeTV
MoveEnterReturn
Mode : Custom
Contrast     80
Brightness 50
Sharpness 50
Color 50
Tint       G 50 R 50
Color Tone : Cool1
Reset
Cool2
Cool1
Normal
Warm1
Warm2
BN68-00825N-01Eng_(048~065)  9/28/05  9:13 AM  Page 52
    Add page 53 to Favourites
    image text
    Enable zoom 
    							53
Viewing the DNIe Demonstration 
This TV includes the DNIe function so as to provide a high visual quality.
If you set DNIe Demo to On, you can view the applied DNIe and normal pictures on the screen  
for demonstration purposes. Using this function, you can view the difference in the visual quality.
1
Press the MENU button. Press the or button to select
“Picture”, then press the ENTER button.
2
Press the or button to select “DNIe Demo”, then
press the ENTER button. 
3
Press the or button to select “Off” or “On”, then
press the ENTER button.
• Off : Switches off the DNIe Demo mode.
• On : Switches on the DNIe Demo mode.
4
Press the EXIT button to exit.
Note
• DNIeTM(Digital Natural Image engine) 
This feature brings you more a detailed image with 3D noise reduction and detail, 
contrast and white enhancement.
➤ ➤Quick way to select DNIe: Just press “DNIe” button under the cover
of the remote control.
Mode : Dynamic√Size : 16:9√Digital NR  : On√DNIe Demo : Off√My Color Control√Dynamic Contrast  : Off√
†More
PictureTV
MoveEnterReturn
Mode : Dynamic
Size : 16:9
Digital NR  : On
DNIe Demo :Off
My Color Control
Dynamic Contrast  : Off
†More
PictureTV
MoveEnterReturn
Mode : Dynamic
Size : 16:9
Digital NR  : On
DNIe Demo :Off
My Color Control
Dynamic Contrast  : Off
†More
PictureTV
MoveEnterReturn
Off
On
Off
On
DNIe Demo
OffOn
BN68-00825N-01Eng_(048~065)  9/28/05  9:13 AM  Page 53
    Add page 54 to Favourites
    image text
    Enable zoom 
    							Changing the Screen Size
Screen size selection depends on the type of video input.
54
1
Press the MENU button. Press the or button to
select “Picture”, then press the ENTER button.
2
Press the or button to select “Size”, then press the
ENTER button.
3
Press the œor √button to select the screen size you
want, then press the ENTER button.
4 
Press the EXIT button to exit.
Notes
•
Supported screen resolution modes may differ depending on the model of the product.
•
If you watch a still image or the 4:3 (Normal) mode for a long time (over 2 hours), 
an image may be burned onto the screen.
•
View the TV in 16:9 (Wide) or Panorama mode as much as possible.
• 16:9 : Sets the picture to 16:9 wide mode.
• Panorama  : Use this mode for the wide aspect ratio of a panoramic picture.
• Zoom1  : Magnifies the size of the picture on the screen.
• Zoom2  : Expands the Zoom1 format picture.
• 4:3  : Sets the picture to 4:3 normal mode.
➤ ➤Quick way to change the Screen size: Just press P.SIZE button under the
cover of the remote control.
Mode : Dynamic√Size : 16:9√Digital NR  : On√DNIe Demo : Off√My Color Control√Dynamic Contrast  : Off√
†More
PictureTV
MoveEnterReturn
Mode : Dynamic√Size : 16:9√Digital NR  : On√DNIe Demo : Off√My Color Control√Dynamic Contrast  : Off√
†More
PictureTV
MoveEnterReturn
SizeTV
MoveEnterReturn
16:9Panorama Zoom1 Zoom2 4:3
BN68-00825N-01Eng_(048~065)  9/28/05  9:13 AM  Page 54
    Add page 55 to Favourites
    image text
    Enable zoom 
    							When you press the P.SIZE button under the cover of the remote control, the TV’s screen mode should 
appear in sequence. The screen displays in this order: 16:9, Panorama, Zoom1, Zoom2, 4:3.
Note
• If you watch a still image or the 4:3 mode for a long time (over 2 hours), an image may be burned
onto the screen. View the TV in 16:9 or Panorama mode as much as possible.
55 16:9
Sets the picture to 16:9 wide mode
.
Panorama
Converts regular 4:3 aspect ratio screen to
wide screen.
Zoom1
The screen size when Wide screen is
vertically enlarged.
Zoom2
The screen size when the Zoom1 screen is 
vertically enlarged.
4:3
Sets the picture to 4:3 normal mode.
Notes
• In TV, VIDEO, S-VIDEO, and COMPONENT(480i, 480p) modes, all screen modes can be selected.
(16:9 
Panorama Zoom1 Zoom2 4:3).
• In TV(DTV), COMPONENT(720p, 1080i), PC, HDMI modes, only 16:9 & 4:3 modes can be selected.
• In Zoom1, Zoom2 modes, you can move the picture on screen by pressing the or button.
16:9
Panorama4:3
Zoom2   Move  
Zoom1   Move  
BN68-00825N-01Eng_(048~065)  9/28/05  9:13 AM  Page 55
    Add page 56 to Favourites
    image text
    Enable zoom 
    							56
Viewing the Picture-in-Picture
Selecting the PIP Screen
1
Press the MENU button. Press the or button to select
“Picture”, then press the ENTER button. 
2
Press the or button to select “PIP”, then press the
ENTER button. 
3
Press the ENTER button, then press the or 
button to select “On”. The PIP image will appear in 
the corner of the screen.
• Pressing the or button will alternate between 
“On” and “Off”.
Note
• If the PIP On/Off does not function, check if the 
V-Chip Lock (refer to page 121) is On. PIP does 
not function when the V-Chip Lock is set to On.
Change the setting to Off and try it again.
4 
Press the EXIT button to exit.
PIP Settings 
Note• This TV has only one tuner and does not allow you to watch one TV channel in the main screen and
another channel in the PIP screen.
Mode : Dynamic√Size : 16:9√Digital NR  : On√DNIe Demo : Off√My Color Control√Dynamic Contrast  : Off√
†More
PictureTV
MoveEnterReturn
PIP : Off√Source : TV√Swap
Size : √Position : √PIP Channel : Air 3√
PIPTV
EnterReturn
➤ ➤Quick way to access the PIP mode: Just press “PIP” button under the
cover of the remote control.
PIP : On√Source : TV√Swap
Size : √Position : √PIP Channel : DTV Air 3 - 0√
PIPTV
MoveEnterReturn
PIP screen  Main screenTV
AnalogDigital
(ATSC/QAM)AV1(A)
AV2(A)S-Video1(A) S-Video2(A)
Component(A)PCHDMI(D)
Analog
Digital
(ATSC/QAM) TV
X
X
X
X
X
X
OO
O
O
O
O
X
X XX
O
X
X
X
X
X
X
OX
O
X
X
X
X
X
X
OX
O
X
X
X
X
X
X
OX
O
X
X
X
X
X
X
OX
O
X
X
X
X
X
X
OO
X
O
O
O
O
O
X
XO
X
O
O
O
O
O
X
XAV1(A)
AV2(A)
S-Video1(A)
S-Video2(A)
Component(A)
PC
HDMI(D)
O : PIP and swap operate   
X : PIP doesn’t operate A : Analog     
D : Digital
BN68-00825N-01Eng_(048~065)  9/28/05  9:13 AM  Page 56
    Add page 57 to Favourites
    image text
    Enable zoom 
    							57
Selecting an External Signal
You can use PIP to view a signal from an external source, such as a VCR.
1
Press the MENU button. Press the or button to select
“Picture”, then press the ENTER button. 
2
Press the or button to select “PIP”, then press the
ENTER button.
3 
Press the or button to select “Source”, then press
the ENTER button.
4
Press the or button to cycle through all of the
available signal sources: 
“TV”, “AV1”, “AV2”, “S-Video1”, “S-Video2”, 
“Component1”, “Component2”, or “HDMI”.
•The signal from these inputs will not appear if you 
have not connected any equipment to the TVs 
respective input jacks.
5 
Press the EXIT button to exit.
Notes
• The same source cannot be selected on both the main and sub screens. 
• PC is not available in PIP picture.
Mode : Dynamic√Size : 16:9√Digital NR  : On√DNIe Demo : Off√My Color Control√Dynamic Contrast  : Off√
†More
PictureTV
MoveEnterReturn
PIP : On
Source : TV
Swap
Size : 
Position : 
PIP Channel : DTV Air 3 - 0
PIPTV
MoveEnterReturn
PIP : On√Source : TV√Swap
Size : √Position : √PIP Channel : DTV Air 3 - 0√
PIPTV
MoveEnterReturn
TV
AV1
AV2
S-Video1
S-Video2
Component 1
Component 2
HDMI
BN68-00825N-01Eng_(048~065)  9/28/05  9:13 AM  Page 57
    Add page 58 to Favourites
    image text
    Enable zoom 
    							Swapping the Contents of the PIP and Main Image
1 
Press the MENU button. Press the or button to select
“Picture”, then press the ENTER button. 
2
Press the or button to select “PIP”, then press the
ENTER button.
3
Press the or button to select “Swap”, then press the
ENTER button.
• The image in the PIP window will appear on the 
main screen, and vice versa. (Refer to page 56)
Note
•If main picture is in PC mode, Swap is not 
available.
4 
Press the EXIT button to exit.
58
Mode : Dynamic√Size : 16:9√Digital NR  : On√DNIe Demo : Off√My Color Control√Dynamic Contrast  : Off√
†More
PictureTV
MoveEnterReturn
PIP : On√Source : TV√Swap
Size : √Position : √PIP Channel : DTV Air 3 - 0√
PIPTV
MoveEnterReturn
PIP : On√Source : TV√Swap
Size : √Position : √PIP Channel : DTV Air 3 - 0√
PIPTV
MoveEnterReturn
BN68-00825N-01Eng_(048~065)  9/28/05  9:13 AM  Page 58
    Add page 59 to Favourites
    image text
    Enable zoom 
    							59
Changing the Size of the PIP Window
1 
Press the MENU button. Press the or button to select
“Picture”, then press the ENTER button. 
2
Press the or button to select “PIP”, then press the
ENTER button.
3
Press the or button to select “Size”, then press the
ENTER button.
4
Press the or button to select option you want, then
press the ENTER button.
5
Press the EXIT button to exit.
Note
• When the size is Double, the screen is resized and PIP is canceled.
PIP : On
Source : TV
Swap
Size : 
Position : 
PIP Channel : DTV Air 3 - 0
PIPTV
MoveEnterReturn
PIP : On
Source : TV
Swap
Size : 
Position : 
PIP Channel : DTV Air 3 - 0
PIPTV
MoveEnterReturn
Mode : Dynamic√Size : 16:9√Digital NR  : On√DNIe Demo : Off√My Color Control√Dynamic Contrast  : Off√
†More
PictureTV
MoveEnterReturn
PIP : On√Source : TV√Swap
Size : √Position : √PIP Channel : DTV Air 3 - 0√
PIPTV
MoveEnterReturn
BN68-00825N-01Eng_(048~065)  9/28/05  9:13 AM  Page 59
    Add page 60 to Favourites
    image text
    Enable zoom 
    							Changing the Location of the PIP Image
1 
Press the MENU button. Press the or button to select
“Picture”, then press the ENTER button. 
2
Press the or button to select “PIP”, then press the
ENTER button.
3 
Press the or button to select “Position”, then press
the ENTER button.  
4 
Press the or button to select the PIP position you
want, then press the ENTER button.
5 
Press the EXIT button to exit. 
Note
• In Double Window (     ) and Double Wide (     ) modes, Position cannot be selected.
60
Mode : Dynamic√Size : 16:9√Digital NR  : On√DNIe Demo : Off√My Color Control√Dynamic Contrast  : Off√
†More
PictureTV
MoveEnterReturn
PIP : On√Source : TV√Swap
Size : √Position : √PIP Channel : DTV Air 3 - 0√
PIPTV
MoveEnterReturn
PIP : On
Source : TV
Swap
Size : 
Position : 
PIP Channel : DTV Air 3 - 0
PIPTV
MoveEnterReturn
PIP : On
Source : TV
Swap
Size : 
Position : 
PIP Channel : DTV Air 3 - 0
PIPTV
MoveEnterReturn
BN68-00825N-01Eng_(048~065)  9/28/05  9:13 AM  Page 60
    All Samsung manuals Comments (0)

    Related Manuals for Samsung HP-R6372 Plasma Display User Manual