Samsung HP-R6372 Plasma Display User Manual

							31
Connecting CableCARD
You must obtain a CableCARD from a local cable service provider.
Insert the CableCARD into the “CableCARD” slot and the message “CableCARDTMInserted” is
displayed on  the screen. If the channel information does not already exist, the message
“Updating Channel List” is displayed during channel information configuration.  
When channel information configuration is finished, the message “Updating Completed” is
displayed. It indicates that the channel list is now updated.
How to Connect
1
2
TV Rear Panel
Please insert the
card as shown.
Power cord
BN68-00825N-01Eng_(002~033)  9/28/05  9:09 AM  Page 31 
						

							BN68-00825N-01Eng_(002~033)  9/28/05  9:09 AM  Page 32 
						

							PLASMA DISPLAY PANEL
Operation
Turning the TV On and Off ............................................................34
Viewing the Menus and Displays ..................................................38
Memorizing the Channels ............................................................39
Adding and Erasing Channels ......................................................41
Setting Up Your Remote Control ....................................................44
Viewing an External Signal Source ................................................46
BN68-00825N-01Eng_(002~033)  9/28/05  9:09 AM  Page 33 
						

							Turning the TV On and Off
34
Turning the TV On and Off
Press the POWER button on the remote control.
The TV will be turned on and you will be able to use its features.
You can also use the Power button on the front of the TV.
Note
• If your TV isn’t turned on when the POWER button is pressed:
Press the 
MODEbutton to check if the TV mode has been
chosen
. 
Plug & Play Feature
When the TV is initially powered On, basic customer settings proceed automatically and subsequently:
Setting the language, checking the antenna input, memorizing the channels, and setting the time.
Note
• The Plug & Play function operates after plugging in the TV for the first time.
1
Press the POWER button on the remote control.
The message “Menu language, Channels and Time 
will be set.” is displayed.
Press the ENTER button, then “Select the language of 
the OSD.” menu is automatically displayed.
2
Press the ENTER button to enter the language.
Press the or button to select language, then 
the ENTER button. “Select the antennas to 
memorize.” menu is automatically displayed.
Menu language, Channels 
and Time will be set.i
Start
Select the language of the OSD.
Menu Language          :English
Plug & Play
EnterSkip
English
Spanish
French
Move
BN68-00825N-01Eng_(034~047)  9/28/05  9:11 AM  Page 34 
						

							3
Press the or button to memorize the channels of
the selected connection. 
Press the ENTER button to select “Start”.
Notes
•  If the antenna is connected to ANT 1 IN (CABLE IN),
select “Cable” and if it is connected to ANT 2 IN 
(AIR IN), select “Air”.
• If both ANT 1 IN and ANT 2 IN are connected, 
select the “Air + Cable”.
4
Select the correct signal source (STD, HRC, and IRC) by
pressing the or button, then press the ENTER button.
Note
•
STD, HRC, and IRC identify various types of cable
TV systems. Contact your local cable company to
identify the type of cable system that exists in your
particular area. At this point the signal source has
been selected. Proceed to “Storing Channels in
Memory” on page 40.
5
The TV will begin memorizing all of the available
channels. 
After all the available channels are stored, the Auto 
program menu reappears. 
Press the ENTER button at any time to interrupt the 
memorization process.
Press the ENTER button to select OK when channel 
memorization is complete.
“Set to daylight savings time.” menu is automatically 
displayed.
35
Select the antennas to memorize.
Air               
Cable
Air + Cable
Plug & Play
EnterSkipMove
Start
Start
Start
Select the cable system.
Digital Channel : STD
√Analog Channel : STD  √Start
Plug & Play
EnterSkipMove
Plug & Play
EnterSkip
Auto Program in Progress.
Cable   Channel   67
Stop
Plug & Play
EnterSkip
Auto Program is completed. 
14 Channels were memorized.
AIR : 9 , Cable  : 5.
OK
BN68-00825N-01Eng_(034~047)  9/28/05  9:11 AM  Page 35 
						

							36
6
Press the ENTER button. Press the or button to 
select “Yes” or “No”, then the ENTER button.
“Select the time zone in which you live” menu is 
automatically displayed.
7
Press the or button to highlight the time zone 
for your local area (and to move the highlight to the 
appropriate time zone on the map of the United States).
Press the ENTER button. 
If you have received a digital signal, the time will 
be set automatically. If not, see page 98 to set the 
clock.
8
The message “Completed. Time will be updated
automatically.” is displayed. 
When you have finished, press the ENTER button.
• The message will automatically disappear after a few 
seconds, even if the ENTER button is not pressed.
Completed.  Time will 
be updated automatically.i
OK
Set to daylight savings time.
Daylight Savings Time          :English
Plug & Play
EnterSkip
No
Ye s
Move
Select the time zone in which you live.
Plug & Play
Eastern
Central
Mountain
Pacific
Alaska
Hawaii
EnterSkipMove
BN68-00825N-01Eng_(034~047)  9/28/05  9:11 AM  Page 36  
						

							37
To reset this feature...
1
Press the MENU button. Press the or button to select
“Setup”, then press the ENTER button.
2
Press the ENTER button to select “Plug & Play”.
3
For further details on setting up options, refer to the 
previous page.
Note
• Plug and Play can only be accessed in the TV mode.
Plug & Play√Language : English√Time√V-Chip√Caption√Menu Transparency : Medium√
†More
SetupTV
MoveEnterReturn
Menu language, Channels 
and Time will be set.i
Start
BN68-00825N-01Eng_(034~047)  9/28/05  9:12 AM  Page 37 
						

							38
Viewing the Menus and Displays
Your TV has a simple, easy-to-use menu system that appears on the TV screen. 
This system makes it convenient and fast to use features on the TV. 
Your TV also lets you display the status of many of your TV’s features.
Viewing the Menus
1
With the power on, press the MENU button on the
remote control. The main menu appears on the 
screen. The Input menu is selected.
2
Press the or button to move to items in the menu.
Press the œ/√/ENTER buttons to display, 
change, or use the selected items.
Press the ENTER button to enter items in the menu.
On screen menus disappear from the screen 
automatically after about two minutes or you can press 
the EXIT button on your remote control to exit  the menu.
Displaying Status Information
Press the INFO button on the remote control.
The TV will display the Picture Mode, Sound Mode, MTS, 
V-Chip, and Current Time. 
Note• The INFO window automatically disappears after a few
seconds. Press the INFO button once to manually close the
window.
Source List : TV√Edit Name√Anynet√
InputTV
MoveEnterReturn
AIR 28
Picture Mode : Dynamic
Sound Mode : Custom
MTS : Stereo
V-Chip : Off
12 : 00 am Mono
BN68-00825N-01Eng_(034~047)  9/28/05  9:12 AM  Page 38 
						

							39
Memorizing the Channels
Your TV can memorize and store all of the available channels for both “off-air” (antenna) and cable
channels. After the available channels are memorized, use the CH and CH buttons to scan
through the channels. This eliminates the need to change channels by entering the channel digits.
There are three steps for memorizing channels: selecting a broadcast source, memorizing the
channels (automatic) and adding and deleting channels (manual).
Selecting a broadcast source
Before your television can begin memorizing the available channels, you must specify the type of signal
source that is connected to the TV (i.e., an antenna or a cable system).
1
Press the MENU button. Press the or button to select
“Channel”, then press the ENTER button.
2
Press the or button to select “Auto Program”, then
press the ENTER button.
3
Press the or button to select the antenna connection,
then press the ENTER button.
Notes
• Air  : “Air” antenna signal.
• Cable  : “Cable” antenna signal.
• Air + Cable  : “Air” and “Cable” antenna signals.
• If the antenna is connected to ANT 1 IN (CABLE IN),
select “Cable” and if it is connected to ANT 2 IN 
(AIR IN), select “Air”.
• If both ANT 1 IN and ANT 2 IN are connected, 
select the “Air + Cable”.
Antenna : Air√Auto Program√Add / Delete   √Favorite Channels√Name√Fine Tune√
†More
ChannelTV
MoveEnterReturn
Antenna : Air√Auto Program√Add / Delete   √Favorite Channels√Name√Fine Tune√
†More
ChannelTV
MoveEnterReturn
Auto ProgramTV
MoveEnterReturn
Select the antennas to memorize
Air               
Cable
Air + Cable
StartStartStart
Auto ProgramTV
MoveEnterReturn
Select the antennas to memorize
Air               
Cable
Air + Cable
StartStartStart
BN68-00825N-01Eng_(034~047)  9/28/05  9:12 AM  Page 39 
						

							40
Storing Channels in Memory 
4
Select the correct signal source (STD, HRC, and IRC) by
pressing the or button, then press the ENTER button.
Note
•
STD, HRC, and IRC identify various types of cable
TV systems. Contact your local cable company to
identify the type of cable system that exists in your
particular area. At this point the signal source has
been selected.
5
The TV begins memorizing all available stations. 
Press the ENTER button at any time to interrupt the 
memorization process.
Press the EXIT button to exit.
Note
•The TV must be connected to an antenna in 
order to receive digital TV signals.
Even if a particular channel is deleted from the 
memory, you can always tune to that channel 
directly by using the number buttons on the 
remote control.
Notes
• All available DTV and analog channels are automatically stored in memory.
• It takes approximately 3 to 10 minutes to memorize channels.
Auto Program
EnterReturn
Auto Program in Progress.
Cable   Channel   67
Stop
Select the cable system.
Digital Channel : STD
√Analog Channel : STD √Start
Auto ProgramTV
MoveEnterReturn
BN68-00825N-01Eng_(034~047)  9/28/05  9:12 AM  Page 40