Samsung Sde 5001 N Manual

							English _31
 LIVE
EVENT MONITORING
This will display the channel in sync with a specific event \(Sensor/Motion/Video Loss\) if it occurs.
In 
						

							32_ using the DVR
Y
backup and network.
SYSTEM SETUP
You can setup Date/Time/Language, Permission, System Properties and Log.
Date/Time/Language
You can check and setup the current Date/Time and time related properties, as well as the language used for 
the interface on the screen.
Setting the Date/Time/Language
Set the Date/Time/Language
Using the mouse may help make setup easier.
1. Press the [MENU] button on the remote control or on the 
front panel.
  If not logged in, it prompts with login window.
LoginŽ. (Page 
22)
2. Use the left/right buttons (◄ ►) to select the .
System property setup menu is selected.
3. Use the up/down buttons (
	
) to select  and press the [ENTER] button.
4. Select .
A dialog to setup Date, Time and Language.
5. Use direction buttons (
	
◄ ►) to select an item to set 
and make your changes.
• Date : Sets the date that will appear on the screen.
You can select the date format.
• Time : Sets the time and its format that will appear on the 
screen.
Select either one from .
• Time Zone : Sets the time zone of your area based on the 
Greenwich Mean Time (GMT).
  GMT (Greenwich Mean Time) is standard World Time and the 
basis of world time zone.
• 
to a selected  regularly if you select to use .
 
In this case,  setup does not allow time adjustment.
using the DVR
S
Date/Time/LanguageDate/Time/LanguageHoliday
 Date 2011-01-01 YYYY-MM-DD
 Time  08:14:24    24 Hours
 Time Zone 
GMT Time Sync. Setup DST Dec First (Sun) 0  Dec First (Sun) 0
 Language  English
 OK  Cancel
System
Logout
Exit
Date/Time/Language
Permission Management
System Management
Log Information 
						

							English _33
 USING THE DVR
-  Time Server : Enter an IP or URL address of the time 
server.
-  Last Sync Time : Displays the most recent 
synchronization time from the selected time server.
-  Activate as Server : Set to  to allow the DVR to act 
as a Time Server for other DVRs.
• DST : Set up Daylight Saving Time with its period to make 
the time earlier than the GMT of its time zone by 1 hour 
during the set period.
• Language : Select your language. Sets the language for the 
interface.
English, French, German, Spanish, Italian, Chinese, Russian, Korean, Polish, Japanese, Dutch, Portuguese, 
Turkish, Czech, Danish, Swedish, Thai, Romanian, Serbian, Croatian, Hungarian and Greek are available.
6. When the Date/Time/Language setup is done, press .
  M  You can also use numeric buttons on the remote control or front panel to enter values for Date, Time and other 
numeric fields.
Setting Holiday
You can set specific dates to Holidays according to your preferences.
Holidays are applied to  and  too.
Using the mouse may help make setup easier.
1. Use the up/down buttons (	
) in  window to select , and 
press the [ENTER] button.
2. Select .
A calendar for Holiday setup appears.
3. Use the left/right <
> buttons to select year or month, 
and press the [ENTER] button.
4. Use direction buttons (
	
◄ ►) to select a desired date, 
and press the [ENTER] button.
Setting HolidayŽ screen.
  Ex : Select January 11th and check on  only to make 
every January 11th a holiday. Check both on  and 
 to make every January 11th and 2nd Tuesday 
of January holidays.
5. When the Holiday setup is done, press . 
Using the Calendar
Using the mouse may help make setup easier.
Select year and month.
Select the left/right  key on the left/right side of year/month and press [ENTER] button to 
adjust by 1 year/month.
 Use direction buttons to select a date and press [ENTER] button.
  A date with recorded data to be searched will appear in yellow in the System Log, Event Log, Time Search and 
Event Search.
Date/Time/LanguageDate/Time/LanguageHoliday
 Date  2011 -01-01  YYYY-MM-DD
 Time  08:14:24    24 Hours
 Time Zone  GMT+08:00
 Time Sync. 
Setup Not Used
 DST Dec First (Sun) 0H  Dec First (Sun) 0H
 Language  English
 OK  Cancel
Time Synchronization Setup
 OK  Cancel
 Synchronization    Use
 Time Server  203.248.240.103
 Last Sync Time      Fail
 Activate as Server    Use
 OK  Cancel
Date/Time/LanguageDate/Time/LanguageHoliday
 2011  Jan Sun Mon Tue  Wed Thu  Fri  Sat
             1 
 
2 3 4  5  6  7  8 
 9 10 11 12 13 14 15 
 16 17 18  19  20  21  22 
 23 24 25  26  27  28  29 
 30 31
 OK  Cancel
Date/Time/LanguageDate/Time/LanguageHoliday
 2011  Jan Sun Mon Tue  Wed Thu  Fri  Sat
             1 
 
2 3 4  5  6  7  8 
 9 10 11 12 13 14 15 
 16 17 18  19  20  21  22 
 23 24 25  26  27  28  29 
 30 31
Setting Holiday
 OK  Cancel
1 / 11
Jan 2nd Tue 
						

							34_ using the DVR
using the DVR
Permission Management
You can set permissions of each user over the DVRs specific function and settings.
Setting the Administrator

The administrator can use and set all menu items and functions.
Using the mouse may help make setup easier.
1. Use the up/down buttons (	
) in  window to 
move to , and press 
[ENTER] button.
2. Select . 
A dialog for Admin ID and Password input appears.
3. Use direction buttons (
	
◄ ►) to move to a desired 
item, and set the ID and password.
  M  adminŽ, and 
4321Ž.
  The default password can be exposed to a hacking thread so it is recommended to change the password after 
installing the product.
Note that the security and other related issues caused by the unchanged password shall be responsible for the user.
4. When the administrator setup is done, press .
Using Virtual Keyboard
  For alphanumeric inputs, the virtual keyboard window 
appears.
  Use direction buttons (	
◄ ►) to move to a desired 
character, and press the [ENTER] button.
  In the upper text input box of the virtual keyboard, there 
displays a list of candidate words containing the selected 
character.
  Select a word from the list, or use the keyboard to enter the 
whole word.
 OK  Cancel


`  1 2 3 4 5 6 7 8 9 0 -  =

 q  w  e  r  t  y  u  i  o  p  [  ]     Del a  s  d  f  g  h  j  k  l  ;  ‘   Caps Lock z  x  c  v  b  n  m  ,  .  /     Shift
   Space  Ctrl
  If there are many of candidate words, use < ,  > buttons to move between them forward and backward.
  You can use mouse wheel and jog shuttle button too.

 Select . 
Entered word is applied.
  For upper case letters, use  button.
  For special characters, use  button.
  Using the virtual keyboard is the same to a normal keyboard use in your region.
  You can enter only lower-case alphabets and numeric values for the user ID.
  For the password, use alphabets and special characters excluding < 
\\ > and 
						

							English _35
 USING THE DVR
Setting the Gr
You can create user groups and setup permissions for those user groups.
You can register a user for each group in .
Using the mouse may help make setup easier.
1. Use the up/down buttons (	
) in  window to 
move to , and press 
[ENTER] button.
2. Select .
A window for , , , and 
 setup appears.
3. Use direction buttons (
	
◄ ►) to move to a desired 
item, and set the value.
• Add, Delete, Rename : You can add, delete, rename a 
group or modify the permissions given to the group.
The virtual keyboard appears when  or  was selected.
You can add up to 10 groups.
- 
 Add : When you first run the DVR with the admin account, only the admin account exists. Add has already 
been deactivated.  Select to display the virtual keyboard.  Enter a group name. You can add up to 10 
groups.
-  Delete : Deletes a user group that is already registered. Selecting Delete will delete all user accounts 
belonging to that group.
- Rename : Renames a group that is already registered. Select  to display the virtual keyboard.
  Using Virtual Ž. (Page 34)
• Group Authority : Sets permissions to access menu items of each group.
Users of a group can access checked functions.
4. When the group setup is done, press .
T
You can set the permissions of the group users to access the menu according to the channel.
1. Select a menu to which the group permission is assigned.
The menu where the group permission is assigned will be 
displayed in the Live menu when a group user logs in.
• Live View : You can set the permission to access the Live 
screen according to the channel.
  SDE-4001 shows a list of 8 channels in Channel Setup window.
• Search : You can set the permission to access the Search 
menu according to the channel.
• Backup : You can set the permission to access the Backup 
menu according to the channel.
2. Select .
Select and assign a group user so that the user can access the specified menu. 
Permission ManagementGroupAdmin
 OK  Cancel
User
 Add Delete Rename GroupGroup AuthorityLive View
Search
Backup
Setup
Setup
Setup
Setup
Permission ManagementGroupAdmin
 OK  Cancel
User
 Add  Delete  Rename Group  ABCGroup AuthorityLive View
Search
Backup
Setup
Setup
Setup
SetupChannel Setup
 OK  Cancel
 1 2 3  4
 5 6 7  8
 9  10  11  12
 13 14 15  16All 
						

							36_ using the DVR
using the DVR
To restrict the user permissions
If the admin restricts all permissions of an added group, the users belonging to that group can access only 

1. Start the DVR.
If all permissions are restricted, only the Login dialog 
should appear.
2. Log in with a registered user ID.
3. Right-click any area on the screen.
If all permissions are restricted, only the accessible context 
menus should appear.
To change the user password
If you log in with a user account that is restricted to access the menu, you can change your own password 
only.
1. Log in with your account.
2. Select .
The Permission Management setup screen appears.
3. Select .
The Password setup dialog appears.
4. Enter a new password.
5. Select .
You change to the password will be applied.
 ID abc Password 
********
 Confi rm P/W ********
Permission ManagementUser
 OK  Cancel
Login ID  abc
 Password
 OK  Cancel
Scene Mode 
ZOOMAudio Off
Freeze
Stop Alarm
User Menu
Hide Launcher
Logout 
						

							English _37
 USING THE DVR
Setting the User
Users can be added only if a group was created in  menu.
Using the mouse may help make setup easier.
1. Use the up/down buttons (	
) in  window to 
move to , and press 
[ENTER] button.
2. Select .
A window for Add User appears.
3. Use direction buttons (
	
◄ ►) to select  from the 
window.
Add UserŽ appears.
You can configure the Network Viewer settings including 
name, ID, viewer, Select Group and password.
Result of the user setup appears in the  window.
Edit UserŽ.
Edit UserŽ window appears when you select a 
desired item to be changed in the  window.
• Viewer : If you select , you will be given access to the 
Web Viewer and Network Viewer.
  Connecting WŽ. (Page 68)
  For more information about use of Network Viewer, refer to the 
Network Viewers user guide. (Page 
6)
4. When the user setup is done, press .
Setting Permissions
You can set restricted access for all general users.
Items with restrictions will require logging in for use.
Using the mouse may help make setup easier.
1. Use the up/down buttons (	
) in  window to 
move to , and press 
[ENTER] button.
2. Select .
The Restricted Access, Restriction on Network Access, 
Auto Log out, Manual Input of ID setup screen appear.
3. Use direction buttons (
	
◄ ►) to move to a desired 
item, and set the value.
• Restricted Access : All menu items allowed for a user can 
be set with restricted access.
- Checked (
) : Restricted
- Not checked (
) : Accessible
  If it is not checked () in , any user can access the item no matter what the  
setting.
  If it is checked () in , a user can access the item only if the user has permission in  setting.
• Restriction on Network Access : Restricts remote access from a  network.
- All Network : Restricts all access instances via Network Viewer and Web Viewer.
- Web Viewer : Restricts access via the Web Viewer.
• Auto Log out : A user will be automatically logged out if there is no operation on DVR for over set period of 
time.
 Group  Name  ID  Viewer  Delete
Permission ManagementUserAdmin
 OK  Cancel
Setup
Add
Group
 Group  All Group
Previous/Next Page
 Group  Name  ID  Viewer  Delete
Permission ManagementUserAdmin
 OK  Cancel
Setup
Add
Group
 Group  All Group
Previous/Next PageAdd User
 OK  Cancel
 Name  Kim
 ID  ksh
 Viewer  Not Used
 Select Group  ABC
 Password 
********
 Confi rm P/W 
********
Permission ManagementSetupAdmin
 OK  Cancel
GroupRestricted AccessLive View  Backup  All
 Auto Log out  3 min
 Manual Input of ID  ON
User
Restriction on Network AccessAll Network  Web Viewer 
						

							38_ using the DVR
using the DVR
• Manual Input of ID : Prompts you to enter the user ID 
manually for the login process.
- Checked (
) : Encloses the registered user IDs with the  
 [
] symbols.
  Use the virtual keyboard to enter the user ID.
4. When the permission setup is done, press .
System Management
You can check the system version, update to a newer version, as well as data backup and initialization.
Checking the System Information
You can check the current system version, broadcasting system, MAC address. You can update the system.
Using the mouse may help make setup easier.
1. Use the up/down buttons (	
) in  window to 
move to , and press [ENTER] 
button.
2. Check the Version, Broadcast Format, and MAC Address.
• 
information.
The values can not be changed by a user.
• 
Login ID 
*****
 Password
 OK  Cancel
 Software Version V1.0xh_yymmddhhmmss Broadcast Format 
NTSC
 MAC Address  00:00:F0:54:FF:FF
System ManagementSystem InformationSettings
Previous
System Information
Upgrade Device  USB2FlashStorage
 Version V1.0xh_yymmddhhmmss
S/W Upgrade 
						

							English _39
 USING THE DVR
• Updating the Softwar
1. Connect a device storing the software to be updated.
(It may take about 10 seconds to recognize the device.)
  Upgradeable devices include USB memory and network device.
  To update the network, the current DVR should have been 
connected to the network.
Upgrade via the proxy server may not be enabled due to the 
restricted access.
2. Select  from  window.
3. Select .
4. When the recognized device appears, select .
  The  button will be activated only if the current  of the  is 
same to or older than that of .
5. Press 
						

							40_ using the DVR
using the DVR
Settings
You can copy and import the DVR settings by using a storage media.
Using the mouse may help make setup easier.
1. Use the up/down buttons (	
) in  window to 
move to , and press [ENTER] 
button.
2. Select .
A window of storage device and load factory default 
appears.
3. Use direction buttons (
	
◄ ►) to move to a desired 
item, and export or import settings data to a storage 
device.
• Storage Device : Shows the connected storage device.
• DVRUSB : Exports DVR settings to the connected storage device.
• USBDVR : Imports DVR settings from the storage device and applies to the DVR.
  If  is checked, the network settings will be imported too.
• Load Factory Default : If  is selected, a 
Load Factory DefaultŽ prompts.
Press  to initialize the system to the factory default.
4. To move to the previous menu, press .
Log Information
You can browse logs on the system and events.
System Log
System Log shows log and timestamp on every system start up, system shutdown, and changes on system 
settings.
Using the mouse may help make setup easier.
1. Use the up/down buttons (	
) in  window to 
move to , and press [ENTER] button.
2. Select .
  Using the CalendarŽ. (Page 33)
Click on the calendar <
> to display the calendar window.
• Type : When there are too many logs, you can display logs 
of the desired format by selecting the type.
3. Use direction buttons (	
◄ ►) to move to a desired item, 
and press .
 Storage Device    0 MB (Remained Capacity)
 DVR
USB 38010100 USB
DVR No date  Include Network Settings
SettingsSystem Information
Previous
 Load Factory DefaultDefaultExport
Import
System Management
Load Factory Default
 OK  Cancel
Sure to Default Setting?
 Storage Device    0 MB (Remained Capacity)
 DVR
USB 38010100 USB
DVR No data  Include Network Settings
SettingsSystem Information
Previous
 Load Factory DefaultDefaultExport
Import
System Management
 No.  Log List  Date/Time 
Log InformationSystem LogEvent Log
First PageSearch Day  2011-01-01
Previous
Previous/Next Page Type View all
Search
Last PageBackup Log