Samsung Sde 5001 N Manual

							English _61
 USING THE DVR
Gr
You can set the group to whom the e-mail is sent, and specify the permission for each group.
You can add recipients for each group in the  menu item.
The recipient is set separately from the DVR user group.
Using the mouse may help make setup easier.
1. In the  setting window, press the up/down 
(
	
) button to move to  and press the 
[ENTER] button.
2. Select .
3. Use direction buttons (
	
◄ ►) to move to a desired item 
and set the value.
• Add : Select  and use the virtual keyboard to add a 
group.
  Using Virtual Ž. (Page 34)
• Delete : Deletes the selected group.
• Rename : You can reset the recipient permission of an existing group.
• Recipient Permission : Set the permission of the recipient group.
4. When the group setting is done, press .
Recipient Setting
You can add/remove a recipient(s) to/from the specified group and edit the group if necessary.
Using the mouse may help make setup easier.
1. In the  setting window, press the up/down 
(
	
) button to move to  and press the 
[ENTER] button.
2. Select .
3. Use direction buttons (
	
◄ ►) to move to a desired item 
and set the value.
• Add : You can select a recipient name, e-mail address or 
group.
You should have created a group in the  menu 
item before you can add a user to the group.
  For inputting the recipient name and email address, refer to 
Using Virtual Ž. (Page 
34)
4. When the recipient setting is done, press .
Mailing ServiceSMTP
 OK  Cancel
Event GroupRecipient
 Group  Name  e-Mail Address  DeleteAdd Group  All Group
Previous/Next Page
Mailing ServiceGroupSMTP
 OK  Cancel
Recipient
 Group Recipient PermissionSensor Motion
Change P/W  HDD Info  Video Loss
Power On/Off  Manual Record
Event 
 Add Delete Rename
Mailing ServiceSMTP
 OK  Cancel
Event GroupRecipient
 Group  Name  e-Mail Address  DeleteAdd Group  ABC
Previous/Next PageAdd recipient
 OK  Cancel
 Name
 Email
 Select Group  ABC 
						

							62_ sear
SEARCH
You can perform the search for recorded data by the time or by the search criteria such as an event.
You can access the  menu directly in Live mode.
1. In Live mode, right-click any area of the screen.
The Live menu appears.
2. Select .
Or, press the [SEARCH] button on the remote control or 
the front panel.
3. The Search menu appears.
4. The search can be restricted by the Auto Delete function.
Setting the Recording > Record OptionŽ. 
(Page 
50)
  M  Overlapped data : It only appears if there exists overlapped 

time setup. The latest data comes first, from .
It does not appear in .
Time Search
You can search for recorded data of a desired time.
As the time to display may be different depending on the time zone and the DST standard time, the time of 
data recorded in the same time can be displayed differently depending on time zone and DST settings.
Using the mouse may help make setup easier.
1. Select  in the  menu.
2. Select a date to search.
  Using the CalendarŽ. (Page 33)
3. The record data on the specific date will be listed.
The display bar is different according to the data type. 
So check the data type for the color in the left pane.
4. Use direction buttons (
	
◄ ►) to set the search criteria 
and press the [ENTER] button.
• Go to First : Moves to the earliest date.
• Go to Last : Moves to the most recent date. 
• Time : Enter a time to perform the search or use the up/down button <
>> to select one.
search & play
Scene Mode 
ZOOMAudio Off
Freeze
Stop Alarm
Record
Play
SearchBackup
Main Menu
Shutdown
Hide Launcher
Logout
Time Search2011-01-01
 Play  Return
2011/01/01  00:01:17
Standard Schedule
Motion Sensor
V.Loss Etc
Go to First Go to Last
Zoom In Zoom Out
 All  DataCAM 01
CAM 02
CAM 03
CAM 04
CAM 05
CAM 06
CAM 07
Previous/Next Page 00:01 Overlapped Data  List1
Time Search
Event Search
Backup Search
Motion SearchReturn 
						

							English _63
 SEARCH & PLA
• Zoom In : The map enlarges in detail.
It will switch in the sequence of 24 hours - 16 hours - 8 hour 
- 4 hours.
• Zoom Out : The map will switch in the reverse order of the 
detailed mode above.
It will switch in the sequence of 4 hours - 8 hour - 16 hours 
- 24 hours.
  M  Double-click a desired time to zoom it in/out.
• Preview : Click  and select (click, drag) a time in 
 to display a still image for the portion.
-  If the selected channel does not contain any recorded data, it will be marked black.
5. Select a data item and click .
The screen switches to the data playback mode.
Event Sear
You can search for events by the channel and play them.
Using the mouse may help make setup easier.
1. Select  in the  menu.
2. Use direction buttons (
	
◄ ►) to set the search criteria 
and press the [ENTER] button.
  All record events on a specific date will be found. (Normal/
Schedule recording included)
• Date/Time Preview : If you select a data item in the list, the 
still image of the selected data will be displayed in the left 
preview pane.
• Event : Displays the type of the event that occurred.
3. Select a data item and click .
The screen switches to the event data playback mode.
Backup Sear
Searches for backup data in the connected backup device.
Only data in the format of DVR is included in the search.
Refer to  Setting the BackupŽ. (Page 
54)
Using the mouse may help make setup easier.
1. Select  in the  menu.
2. Use direction buttons (
	
◄ ►) to set the search criteria 
and press the [ENTER] button.
• Record Period : Displays the record period.
• Channel : Displays the recorded channel.
• Play Start Time : Select a time that you start playing.
3. Select a data item and click .
The screen switches to the backup data playback mode.
Backup Search
 Play  Return
  No.  Folder Name  File Name 1  20110101  16190000
Previous/Next Page
 File Name  16190000   
 Channel  1
 Record Period  2011-01-01 01:01:01 - 2011-01-01 01:01:10
 Play Start Time  2011-01-01  16:30:52USB:USB2FlashStorage
Time Search2011-01-01
 Play  Return
2011/01/01  00:01:17
Standard Schedule
Motion Sensor
V.Loss Etc
Go to First
Go to Last
Zoom In Zoom Out
 All  DataCAM 01
CAM 02
CAM 03
CAM 04
CAM 05
CAM 06
CAM 07
Previous/Next Page 00:01 Overlapped Data  List1
Event Search
CAM 01
2011-01-01
 Play  Return
Previous/Next Page 2011/01/01  00:01:22
 No.  Date/Time Preview  Event  3  02:47:54 ~ 02:48:59  Motion
  2  00:39:06 ~ 00:40:30  Motion
  1  00:01:22 ~ 00:02:28  MotionGo to First Go to Last
Overlapped Data  List1 
						

							64_ sear
search & play
Motion Sear
If a motion is detected in each channel, you can set a desired area to perform the search.
You can use the mouse to select the related items.
1. Select  in the  menu.
2. Use direction buttons (
	
◄ ►) to set the search criteria 
and press the [ENTER] button.
  If you set the motion area to , the  
button will be activated.
• Motion Region : Select an area to perform the search.
-  All Area : Searches for all areas of the selected channel.
-  Current Area : Searches for the motion area for each 
Motion Detection > 
Setting the Motion Detection ArŽ. (Page 
52)
-  Manual Area : You can set the motion area manually.
• Setup : The Setup button will be activated only if you have 
set the motion area to Manual. Press this button to display 
the area setting window.
• Date/Time : The Date/Time will be automatically set by the 
hour, and the end time will be automatically set to one hour 
later than the start time if it is set.
• Preview : Select a data item in the list to display the still 
image of the item.
3. Select a data item and click .
The screen switches to the motion data playback mode. 
Motion Region
 OK  CancelApply to All CH1 CHIndividual
Motion Search
Date/Time 2011-01-01  03:41:18 2011-01-01  05:11:44
 Play  Return
 No.  Start Time 7  01:01:30
 6  01:01:25
 5  01:01:20
 4  01:01:15
 3  01:01:10
 2  01:01:05
 1  01:01:01
Previous/Next Page
SearchChannel  CAM 01  Motion Region  All AreaSetup
2011
/01/01  01:01:30
Go to First Go to LastOverlapped Data List1 
						

							English _65
 SEARCH & PLAY
PLAYBACK
Play
You can play data stored in the HDD and backup a desired portion of the data.
Using the mouse may help make setup easier.
1. In Live mode, click  in the right-click menu or
< 
 > in the launcher menu, or press the Play button on 
the remote control or the front panel.
2. Use the up/down button (
	
) to select a menu.
  For data search, refer to . (Page 62)
3. Select a data item and click  in the Search menu.
The selected data is played and the play launcher appears 
on the screen.
  If there is an existing data,  will start immediately 
without performing the search.
• Playback Information : Displays the date and time of the 
current data in the top corner.
• Backup : Click < 
 > to set the current time to the start 
time of backup; you can specify a backup area using the 
mouse (yellow triangle).
Click < 
 > again to set the current time to the end time of 
Backup RangeŽ window appears.
-  Type : Supports formats of DVR, AVI and SEC.
Setting the BackupŽ. 
(Page 
54)
-  Device : Select a backup device.
-  Check Capacity : Enables you to check the capacity of the 
selected storage device.
4. If you want to return to the Live screen in Play mode, click < 
 > in the launcher menu or press the 
[
] button on the remote control or the front panel.
Backup 0
Used 0
Free 0Check capacity
 Backup  Cancel
Backup Range Start     
 End
2011-01-01 00:01:06    2011-01-01 08:25:45
 Device  USB-Storage   
 Type    DVR
 Folder    
 Filename  0001 
Change
3&$
Alarm Freeze
Scene Mode 
ZOOMAudio Off
Freeze
Stop Alarm
Record
PlaySearch
Backup
Main Menu
Shutdown
Hide Launcher
Logout 
						

							66_ search & play
search & play
Using the Playback Button
Part Names
Play TIndicates the current playback point,
Skip BacMoves backward by unit time.
Bac
PlayUsed for quick backward search while in Play
Bac
Play 
Step BacMoves backward by one frame at a time.
PauseStops the playback temporarily
StopStops playback and moves to the live screen.
 Step ForwMoves forward by one frame at a time.
Forw
PlayPlay forward up to 4 channels simultaneously at a low speed.
  In a split mode,
quality
Forw
PlayUsed for quick forward playback.
Skip ForwMoves forward by unit time.
ReturReturn to the previous.
AudioSets Audio 
RECRecords all channels in Live mode.
Partial BacBegins backup of the selected section of the video being played,
ending point.
Mode SwitcClick a desired playback mode or press [MODE] to switch the screen mode in sequence.  The gray area in the center of the 13-split mode plays the Live channel.
The default channel of the Live mode is CH1,
3&$ 
						

							English _67
 WEB VIEWER
INTRODUCING WEB VIEWER
What is W
W
access to live video, ar
video etc.
PRODUCT FEA
• Remote access fr
• Supports 1, 4, 8, 16 camera viewing formats \(maximum of
16 cameras in the list\).
• Gets JPEG format images to print and save to 
						

							68_ web viewer
web viewer
CONNECTING WEB VIEWER
1. Open your web br
of DVR into the URL addr
  MThe basic URL of the DVR is as following in case of MAC
address :
  00-00-F0-ab-cd-ef :
  00-16-6c-ab-cd-ef :
  00-68-36-ab-cd-ef :
  00-09-18-ab-cd-ef :
  Y
2. Set the Admin ID and passwor
Admin.
For general users, enter the DVR user ID and passwor
  J  The default password can be exposed to a hacking thread so
it is recommended to change the password after installing the
product.
Note that the security and other related issues caused by the unchanged password shall be responsible for the user
  M  It allows up to 10 simultaneous access including the 
  It does not allow multiple login of the 
  Initial password of the 
  Password of the Per> menu of the DVR.
  Normal users should have set  under  to 
W34\)
  All settings are applied by the DVR
						

							English _69
 WEB VIEWER
5. YWindows Security Alert
						

							70_ web viewer
web viewer
OSD INFORMA
 
DVR ar
 
selected time information display setting  or
.
 
It disappears when prALARM] button of the DVR.
 
It disappears when prALARM] button of the DVR.
SPLIT
Y
• Click <
> button.
The scr