Samsung Series 7 User Guide

							181
MagicInfo Lite
10
10 MagicInfo Lite
*.mp4 MP4H.264 BP / MP 
/ HP 1920
 x 1080
6 ~ 30 25
MP3 / 
ADPCM /  AAC
MPEG4 SP / 
ASP 1920
 x 1080
6 ~ 30 8
*.3gp 3GPP H.264 BP / MP 
/ HP 1920
 x 1080
6 ~ 30 25
ADPCM / 
AAC / 
HE-AAC
MPEG4 SP / 
ASP 1920
 x 1080
6 ~ 30 8
*.vro VRO
VOB MPEG1
352
 x 288
24 / 25 / 30 30
AC3 / MPEG 
/ LPCM
MPEG2 1920
 x 1080
24 / 25 / 30 30
*.mpg
*.mpeg PSMPEG1
352
 x 288
24 / 25 / 30 30
AC3 / MPEG 
/ LPCM /  AAC
MPEG2
1920
 x 1080
24 / 25 / 30 30
H.264 1920
 x 1080
6 ~ 30 25
*.ts
*.tp
*.trp TSMPEG2
1920
 x 1080
24 / 25 / 30 30
AC3 / AAC /
MP3 / DD+ 
/ HE-AAC
H.264
1920
 x 1080
6 ~ 30 25
VC1 1920
 x 1080
6 ~ 30 25
Video
zVideo content without audio is not supported.
z3D video is not supported.
zContent with a resolution larger than the resolution specified in the table above is not supported.
zVideo content with a Bit rate or Frame rate larger than the rate specified in the table above can 
cause choppy video during playback.
zH.264 Level 4.1 or lower is supported.
zH.264 FMO/ASO/RS, VC1 SP/MP/AP  L4, AVCHD are not supported.
zMPEG4 SP/ASP
†1280 x 720 or smaller : Max. 60 frames / Larger than 1280 x 720 : Max. 30 frames
zGMC 2 or higher is not supported.
File 
ExtensionContainerVideo CodecResolutionFrame
rate(fps)Bit rate (Mbps)Audio
Codec 
						

							182
MagicInfo Lite
10
10 MagicInfo Lite
Audio
zAudio content without video is not supported.
(Only mp3 files are supported as background music for image/PPT slideshows. This feature is 
available only when using the network schedule menu.)
zAudio content with a Bit rate or Frame rate larger than the rate specified in the table above can 
cause choppy audio during playback.
zWMA 7, 8, 9 STD or lower is supported.
zWMA 9 PRO does not support lossless audio and multi-channel audio higher than 2 channels.
zWMA sampling rate 22050Hz mono is not supported.
Image
zCompatible image file format : Jpeg
zSupported maximum resolution : 15,360 x 8640
zSupported image effects : 8 effects (Fade1, Fade2, Blind, Spiral, Checker, Linear, Stairs, Wipe)
Flash
zCompatible with Flash 10.1
zFlash Animation
†Compatible file format : SWF
zResolution : 1280 x 720
†Caution
- Performance comparable to Flash Player on  a Windows operating system cannot be 
guaranteed
- Optimization is needed during content creation
zFlash Video
†Compatible file format : FLV
†Video
-Codec : H.264 BP
- Resolution : 1920 x 1080
†Audio
-Codec : H.264 BP
†Caution
-F4V file format is not supported
- Screen Video is not supported 
						

							183
MagicInfo Lite
10
10 MagicInfo Lite
Power Point
zCompatible docume
nt file formats
†Extension : ppt, pptx
†Version : Office 97 ~ Office 2007
zFunctions not supported
†Animation effect
†3D shapes (which will be displayed in 2D)
†Header and footer (some subitems are not supported)
†Word Art
†Align (A group alignment error may occur)
†Office 2007 (SmartArt is not fully supported. 97 out of 115 subitems are supported.)
†Object insertion
†Opening encrypted documents
†Vertical text (some subitems are not supported)
†Slide notes and handout 
						

							184
MagicInfo Lite
10
10 MagicInfo Lite
10.2 Network Schedule
10.2.1 Connecting to a server
Network setup
To run MagicInfo Lite, connect to a network.
 Refer to 141 page for details about the  Network Settings menu.  
Server setup
Go to MENU   Network   MagicInfo Lite Settings   Server . Next, enter the server information.
(E.g.: http://192.168.0.10:7001/MagicInfo/)
Configuring the FTP mode  and default storage space
zDefault Storage: Specify the location you want to save content (downloaded from the server) to.
†Internal Memory : Save the content to the internal memory of the product.
†USB: Save the content to USB memory.
 If a network schedule is running when USB memory  is not connected, the default content will run. 
MagicInfo Lite
Server
Server Address
Port Access Periodically
192.168.0.10 7001
Apply Cancel 
						

							185
MagicInfo Lite
10
10 MagicInfo Lite
10.2.2 MagicInfo Lite Settings
 MENU  []    Media  MagicInfo Lite   ENTER  []
 Press the  MagicInfo Lite  button on the remote control. 
You can view whether the server is connected (approval) in the  MagicInfo Lite menu screen. To view 
whether the server is connected when a network schedule is running, press  INFO on the remote.
10.2.3 Approving a connected device from the server
1Access the server you have  assigned to your device.
2Enter your ID and password to log in.
m
Network Schedule
Local Schedule
h Local Schedule Manager
Contents Manager
Internal AutoPlay
USB AutoPlay Close
Mode
Network Schedule Server
Connected USB
Disconnected 
						

							186
MagicInfo Lite
10
10 MagicInfo Lite
3Select Device  from the top menu bar.
4Select Lite Device  from the menus on the left.
5Select View Unapproved Lite Device  from the sub-menus of Lite Device.
6Select the Approve button for your device from the list of unapproved Lite devices.
 Pressing the INFO  button on the remote when a network schedule is running will display the 
details of the schedule. Check that the correct de vice has been selected by viewing the device ID 
in the details.
  
						

							187
MagicInfo Lite
10
10 MagicInfo Lite
7Enter the information required to approve the device.
zDevice Name: Enter the device name.
zDevice Model Name : Select your device model.
zDevice Group: Select   to specify the group.
zLocation: Enter the current location of the device.
8Select the View All Lite Device  menu to check that the device has been registered.
9When the device is approved by the server, the schedule registered in the selected group will be 
downloaded to the device. The schedule will run after it is downloaded.
 zFor further details on how to configure a schedule, refer to the .
zIf a device is deleted from the list of devices approved by the server, the device will reboot to reset 
its settings.
  
						

							188
MagicInfo Lite
10
10 MagicInfo Lite
10.2.4 Setting the current time
A schedule may not run if the time set on the device is different from the server's current time.
1Go to the tabs Device  Time.
2Select your device.
3Select  Clock Set , and sync the time with the server.
 For further details on how to manage the time (scheduling, holiday management, etc.), refer to the 
.
  
						

							189
MagicInfo Lite
10
10 MagicInfo Lite
10.3 Local Schedule
Run a schedule created by Local Schedule Manager.
Go to  Local Schedule Manager   Select the content you want to run
 This menu is disabled if no schedule was created by  Local Schedule Manager. 
1Select Local Schedule Manager in the  MagicInfo Lite menu screen.
2Run a schedule created by local schedule.
10.4 Local Schedule Manager
Configure the settings for playback from  Local Schedule. Alternatively, select and play content from 
internal or USB memory according to the customized playback sequence.
10.4.1 Registering a Local Schedule
1Select  Local Schedule Manager in the  MagicInfo Lite menu screen.
Network Schedule
Local Schedule
h Local Schedule Manager
Contents Manager
Internal AutoPlay
USB AutoPlay Close
Mode
Network Schedule Server
Connected USB
Disconnected 
						

							190
MagicInfo Lite
10
10 MagicInfo Lite
2Select Create  in the Local Schedule Manager  screen.
3Select Time to set the time you want to play content.
4Select  Contents  to specify the content you want to play.
5Select Save.
Local Schedule Manager
Storage Internal Memory
No Playing Schedule Create
Edit
Delete
RunInfo
Close
Create
Time
Contents
Time
Contents --:-- am ~ --:-- pm
No Item
Save
Cancel
Contents
Internal Memory USB
No Item Folder1
Menu2.jpg
Menu1.jpg Done
Deselect
Cancel