Samsung Series 7 User Guide

							31
Preparations
1
1 Preparations
1.2.4 Remote Control
 zUsing other display devices in the same space as the remote control of this product can cause the 
other display devices to be inadvertently controlled.
zRemote control button functions may differ for different products. 
Power off the product.
Not available.
Return to the previous menu. Change the channel in TV mode.
Select a connected source device.
Display or hide the onscreen display menu, or return to the previous menu.
Move to the upper, lower, left or right 
menu, or adjust an option's setting. 
Confirm a menu selection.  Mute the sound.
Unmuting the sound: Press MUTE again or 
press the volume control (+  VOL  -) button.
  Adjust the volume.
Press to select additional
channels (digital) being broadcasted by the
same station. For example, to select channel
“54-3”, press “54”, then press “-” and “3”.
Display information on the screen.
Exit the current menu.
Use these buttons in Videos, 
Photos, Music and Anynet+ modes.
MagicInfo Quick Launch Button.
MagicInfo can only be enabled when  a network box is connected.
This button is disabled for products  that do not support MagicInfo.
Quickly select frequently used functions.Power on the product.
Not available.
Turns the 3D image on or off. (ME75B model only)Not available.
In TV mode, settings for various functions can be configured 
such as the program guide for digital channels. For other modes 
(except for TV mode), source devices can be selected manually.
When using a media-related menu or the HDMI-CEC menu, 
a function can be selected by pressing a color button on 
the remote control that corresponds to a button of 
the same color on the screen.
MagicInfo Lite Launch Button.
It sets safe lock function.
Enter the password in the OSD menu, 
or change the channel. 
						

							32
Preparations
1
1 Preparations
Adjusting the OSD with the Remote Control
To place batteries in the remote control
1.  Open the OSD menu.
2. Select from Picture, Sound , Media , Network , System  or Support  
in the displayed OSD menu screen.
3.  Change settings as desired.
4. Finish setting.
5.  Close the onscreen display (OSD) menu.
1
3
2 
						

							33
Preparations
1
1 Preparations
Remote Control Reception Range
Use the remote control within 7m to 10m from the sensor on the product at an angle of 30˚ from the left 
and right.
 zStore used batteries out of reach of children and recycle.
zDo not use a new and used battery together. Replace both batteries at the same time.
zRemove batteries when the remote control is not  to be used for an extended period of time. 
ME65B ME75B
7m ~ 10m
7m ~ 10m
 
						

							34
Preparations
1
1 Preparations
1.2.5 Controlling more than one display product using an External sensor KIT
zConnect the [IR OUT] port on the product to the [IR / AMBIENT SENSOR IN] port on the other 
display product using the stereo cable.
zA command sent from the remote control pointed at product   (to which the External sensor KIT is 
connected) will be received by both display products   and  .
 
The appearance may differ depending on the product. 
1 2
IR/
AMBIENT
SENSOR IN
IR OUTIR/
AMBIENT
SENSOR IN
IR OUT
1
12 
						

							35
Preparations
1
1 Preparations
1.3 Before Installing the Product (Installation Guide)
1.3.1 Tilting Angle and Rotation
 Contact Samsung Customer Service Center for further details. 
AThe product can be tilted at a maximum angle of 15  from a perpendicular wall surface.
BTo use the product vertically (portrait), turn it clockwise so that the LED is pointing down.
 
1.3.2 Ventilation
1. Installation on a Perpendicular Wall
Figure 1.1  Side view A
Minimum 40 mm
BAmbient temperature: Under 35 C
 
zWhen installing the product on a perpendicular wall, allow 
at least 40 mm of space between the product and wall 
surface for ventilation and ensure that the ambient 
temperature is kept below 35 C.
15 
A
B 
						

							36
Preparations
1
1 Preparations
2. Installation on an Indented Wall
 Contact Samsung Customer Service Center for further details. 
 When installing the product on an indented wall, allow at least the space specified above between the 
product and wall for ventilation and ensure th at the ambient temperature is kept below 35 C.
 
Figure 1.2  Side view
Figure 1.3  Top view
Plane view
AMinimum 40 mm
BMinimum 70 mm
CMinimum 50 mm
DMinimum 50 mm
EAmbient temperature: Under 35 C
 
A
B
C
E
DD 
						

							37
Preparations
1
1 Preparations
1.4 Dimensions
(Unit: mm)
 All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice. 
Refer to the dimensions prior to performing installation of your product. Not responsible for 
typographical or printed errors.
 
1
2
3
4
5
Model name
ME65B1480.51428 .5803 .5 855 .5 32 .2 
ME75B 1678.2 1653.2 931.3 958.7 49.9
12345 
						

							38
Preparations
1
1 Preparations
1.5 Installing the Wall Mount
1.5.1 Preparing before installing Wall-Mount
1.5.2 Installing the Wall Mount Kit
The wall mount kit (sold separately) allows you to mount the product on the wall. 
For detailed informatio n on installing the wall moun t, see the instructions provided with the wall mount. 
We recommend you contact a tech nician for assistance when installing the wall mount bracket. 
Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if 
you elect to install the wall mount on your own.
1.5.3 Wall Mount Kit  Specifications (VESA)
 Install your wall mount on a solid wall perpendicular  to the floor. Before attaching the wall mount to 
surfaces other than plaster board, please contact your nearest dealer for additional information. If you 
install the product on a slanted wall, it may fall and result in severe personal injury.
 
To install a wall-mount from another manufacturer, use the 
Holder-Ring. (ME65B model only)
1 
						

							39
Preparations
1
1 Preparations(Unit: mm)
 Do not install your Wall Mount Kit while your product is turned on. It may result in personal injury due to 
electric shock.
 
 zStandard dimensions for wall mount kits are shown in the table 
below.
zSamsung wall mount kits contain a detailed installation manual 
and all parts necessary for assembly are provided.
zDo not use screws that do not comply with the VESA standard 
screw specifications.
zDo not use screws that are longer than the standard length or 
do not comply with the VESA standard screw specifications. 
Screws that are too long may cause damage to the inside of the 
product.
zFor wall mounts that do not comply with the VESA standard 
screw specifications, the length of the screws may differ 
depending on the wall mount specifications.
zDo not fasten the screws too firmly. This may damage the 
product or cause the product to fall, leading to personal injury. 
Samsung is not liable for these kinds of accidents.
zSamsung is not liable for product damage or personal injury 
when a non-VESA or non-specified wall mount is used or the 
consumer fails to follow the product installation instructions.
zDo not mount the product at more than a 15 degree tilt.
zAlways have two people mount the product on a wall. 
Model nameVESA screw hole specs 
(A * B) in millimetersStandard ScrewQuantity
ME65B, ME75B 400 X 400M84 
						

							40
Preparations
1
1 Preparations
1.6 Remote Control
1.6.1 Cable Connection
RS232C Cable
zPin assignment
InterfaceRS232C (9 pins)
Pin TxD (No. 2), RxD (No. 3), GND (No. 5)
Bit rate 9600 bps
Data bits 8 bit
Parity None
Stop bit 1 bit
Flow control None
Maximum length 15m (only shielded type)
PinSignal
1 Detect data carrier
2 Received data
3 Transmitted data
4 Prepare data terminal
5 Signal ground
6 Prepare data set 
7 Send request
8 Clear to send
9 Ring indicator
12345
6789