Samsung Series 7 User Guide

							21
Before Using the Product
 Before Using the Product
When replacing the battery, insert it with the right polarity (+, -).
zOtherwise, the battery may become damaged or it may cause fire, personal 
injury or damage due to leakage of the internal liquid.
The batteries (and rechargeable batteries) are not ordinary refuse and must be 
returned for recycling purposes. The customer is responsible for returning the 
used or rechargeable batteries for recycling.
zThe customer can return used or rechargeable batteries to a nearby public 
recycling center or to a store selling the same type of  the battery or 
rechargeable battery. 
!
! 
						

							221 Preparations
1 
Preparations
1.1 Checking the Contents 
1.1.1 Removing the Packaging
 This image is for reference only. 
1Open the packaging box. Be careful not to damage the product when you open the packaging with 
a sharp instrument.
2Remove the black locking device at the bottom of the box.
3Using the grooves in the box, lift and remove the top of the box.
4Check the components and remove the styrofoam and plastic bag.
 The appearance of actual components may differ from the image shown. 
5Store the box in a dry area so that it can be used when moving the product in the future.
321 
						

							23
Preparations
1
1 Preparations
1.1.2 Checking the Components
 zContact the vendor where you purchased the product if any components are\
 missing.
zThe appearance of the components and items sold separately may differ from the image shown.
zA stand is not provided with the product. To install a stand, you can purchase one separately. 
Components
 Components may differ in different locations. 
Quick setup guideWarranty card(Not available in some locations)User manual
MagicInfo Lite Edition
Software CD Holder-Wire stand
(ME65B model only) Holder-Ring (4EA)
(ME65B model only)
Power cord Remote Control Batteries(Not available in some locations)
D-SUB cable
RS232C(OUT) Adapter RS232C(IN) Adapter
AV/Component Adapter External sensor KIT
(ME65B model only) Double-sided tape
(ME65B model only)



 
						

							24
Preparations
1
1 Preparations
 The RS232C adapter can be used to connect to another monitor using the D-SUB (9-pin) type RS232C 
cable. Ensure you connect each of the adapters to the correct RS232C IN or OUT port on the product.
 
Items sold separately 
 zThe stand is not supplied.
zThe following items can be purchased at your nearest retailer. 
Wall-mount KitRS232C-Stereo cable DVI cable
HDMI-DVI cableHDMI cableDP cable
RCA stereo cable Video cableLAN cable
Stereo cableComponent cable RCA cable
Network Box PIMTouch Overlay 
						

							25
Preparations
1
1 Preparations
1.2 Parts
1.2.1 Control Panel
Panel Key
 The color and shape of parts may differ from what is shown. Specifications are subject to change 
without notice to improve quality.
 
LocationDescription
Power on the product.
If you press the [ ] button when the product is turned on, the control 
menu will be displayed.
 To exit the OSD menu, press and hold the panel key for at least one 
second.
 
Move to the upper or lower menu. You can also adjust the value of an 
option.
 In TV  mode, you can change the channel by moving the panel key up 
or down when the control menu is not displayed.
 
Move to the left or right menu.
 You can adjust the volume by moving the panel key left or right when 
the control menu is not displayed.
 
Panel Key
Remote Control Sensor / Power indicator
(ME75B model only) 
						

							26
Preparations
1
1 Preparations
Control menu
 If you press the [ ] button on the panel key ("1.2.1 Control Panel") when the product is turned on, 
the control menu will be displayed.
 
LocationDescription
Select the connected input source.
Move the panel key right to select Source [ ] in the control menu. 
When the list of input sources is displayed, move the panel key up or 
down to select the desired input  source. Next, press the panel key.
Display the OSD menu.
Move the panel key left to select menu [ ] in the control menu.
The OSD control screen will appear. Move the panel key right to select 
the desired menu. You can select a sub-menu item by moving the panel 
key up, down, left, or right. To change settings, select the desired menu 
and press the panel key.
Enter MagicInfo Lite mode.
Move the panel key up to select 
MagicInfo Lite [ ] in the control menu.
Power off the product.
Move the panel key down to select  Power off [ ] in the control menu. 
Next, press the panel key.
Exit the control menu.
Return 
						

							27
Preparations
1
1 Preparations
1.2.2 External sensor KIT (ME65B model only)
 zThe External sensor KIT has a remote-control sensor, a brightness sensor and function keys. 
If mounting the display onto a wall, you can move the External sensor KIT to the side of the display.
zThe color and shape of parts may differ from what is shown. Specifications are subject to change 
without notice to improve quality.
 
NameDescription
Remote Control Sensor
Aim the remote control towards this spot on the LCD Display.
 Keep the area between the remote sensor and remote control 
obstacle-free.
 
Brightness sensorAutomatically detects the intensity of ambient light around a selected 
display and adjusts the screen brightness.
Power indicator Turns off in power-on mode and blinks green in power-saving mode.
Source Button Switches from PC mode to Video mode. 
Selects the input source that an external device is connected to.
Power ButtonUse this button for turning the LCD Display on and off. 
						

							28
Preparations
1
1 Preparations
Attaching the External sensor KIT to the side (ME65B model only)
 zThis External sensor KIT can be attached to any part of the display using the double-sided tape 
provided with the sensor.
zThe External sensor KIT can also be attached to a wall near the display.
zDo not attach the External sensor KIT to the display if the display does not have plastic or metal 
sides. The display can be damaged.
  
						

							29
Preparations
1
1 Preparations
1.2.3 Reverse Side
 The color and shape of parts may differ from what is shown. Specifications are subject to change 
without notice to improve quality.
 
PortDescription
[IR / AMBIENT SENSOR IN] Supplies power to the external sensor board or receives the light 
sensor signal
[IR OUT] Receives the input signal via the external sensor board and outputs 
the signal via LOOPOUT
[AUDIO OUT] Connects to the audio of a source device
[RGB / DVI / HDMI AUDIO IN] Receives sound from a PC via an audio cable
[USB ] USB memory device port
[AV IN / COMPONENT IN] Connects to a source device using the AV/component adapter [DP IN] Connects to a PC using a DP cable
[HDMI IN] Connects to a source device using an HDMI cable
[DVI OUT (LOOPOUT)] Connects to another product using a DVI cable [DVI IN] Connects to a source device using a DVI cable or HDMI-DVI cable.
[ANT IN] Connect to an antenna cable.
[RGB IN] Connects to a source device using the D-SUB cable.
[RS232C IN / OUT] Connects to MDC using an RS232C-stereo cable [RJ45] Connects to MDC using a LAN cable
DVI IN ANT INRGB IN RS232C
IN      OUT RJ45
IR /
AMBIENT
SENSOR IN
IR OUTAUDIO OUT
RGB / DVI  / HDMI
AUDIO IN
USB
DP IN
HDMI IN
DVI OUT
(LOOPOUT)POWER 
						

							30
Preparations
1
1 Preparations
Assembling the Holder-Wire stand (ME65B model only)
zStand: Sold separately