Samsung Shr5162 N Manual
Have a look at the manual Samsung Shr5162 N Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
PTZ camera control _37 07 PTZ camera control PAN Use the LEFT/RIGHT buttons on the front panel or remote control in PTZ Camera Control Mode to control the camera horizontally. TILT Use the UP/DOWN buttons on the front panel o r remote control in PTZ Camera Control Mode to control the camera vertically. ZOOM Press the TELE/WIDE buttons on the front panel or remote control in PTZ Camera Control Mode to zoom in or out the image displayed. PRESET SETUP A preset is a specific position of the PTZ camera and you can store the positions up to 20. For AD Protocol PTZ camera, you can store up to 7 presets only. To set a preset 1. Press the PRESET button on the front panel or remote control in Single Screen PTZ Camera Control Mode ad select Preset. 2. Press the ENTER button. 3. Press the RIGHT direction button to move the cursor rightward and press the ENTER button. Now perform the PTZ operations to get the wanted position screen and press the ENTER button again to exit from the PTZ motion mode. 4. Press the ENTER button in the Position Name field to open the virtual keyboard. N ow enter the position name using the virtual keyboard and press OK to confirm the input. If you want to delete both position and position name, select Del that is located in the same row. If you press Del , all positions and position names are removed. CAMERA MENU SETUP The PTZ camera provides its own menu. This menu enables you to define several conditions for PTZ control. Only the Pan. and Samsung protocol cameras are authorized for this setup. T o move to the menu screen, press the PRESET button on the front panel or remote control in Single Screen PTZ Camera Control Mode. To return to the upper menu, press the PRESET button. PTZTELEWIDEVIEWPRESET PTZTELEWIDEVIEWPRESET Preset Camera Menu Exit PresetCamera Menu Exit Exit Next Prev No. Position Name Del 1 Del 2 Del 3 Del 4 Del 5 Del 6 Del 7 Del 8 Del ** MAIN MENU V2.0 ** CAMERA... VIDEO SET... PRESET... AUTO SET... OTHER SET... PTZ Control SHR-5162_Eng.indb 372007-06-18 ソタタ・11:48:54
38_ PTZ camera control PRESET VIEW The preset setup allows you to move to a preset position using the PTZ camera. Press the VIEW button on the front panel or remote control in Single Screen PTZ Camera Control Mode to select Preset. Scroll down the cursor until it reaches the preset position that you want and you can check it from the screen to the right. OTHER VIEW Press the VIEW button on the front panel or remote control in Single Screen PTZ Camera Control Mode to use other viewing controls. Samsung, Pan., Pel.-P, and Pel.-D protocol PTZ cameras support the following operations: Samsung: Auto Pan/Scan/Pattern Pan.: Auto Pan/Sequence/Sort Pel.(P,D): Auto Scan/Frame Scan/ Pattern After you select an operation, press the ENTER button. Then the selected operation is marked and starts moving. If you select the other operation during operation, the previous operation is unchecked and the selected operation is marked. If you perform PTZ operations while an operation is in progress, or enter the Preset Setup or C amera Menu Setup mode, the current operation is stopped and unchecked. Even though the system is restarted during operation, the set operation starts and remains marked. PTZTELEWIDEVIEWPRESET (Example: Samsung Protocol) PTZTELEWIDEVIEWPRESET Preset Auto Pan Scan Pattern EXIT Samsung Preset Auto Pan Sequence Sort EXIT Pan. Preset Auto Scan Frame Scan Pattern EXIT Pel. (For example, Samsung Protocol) (Example: Samsung Protocol) (For example, Samsung Protocol) Preset Exit Exit Next Prev No. Position Name 1 2 3 4 5 6 7 8 Auto Pan Scan Pattern PresetExit Auto Pan Scan Pattern SHR-5162_Eng.indb 382007-06-18 ソタタ・11:49:10
recording _39 08 RECORDING REC (NORMAL RECORDING) Pressing the RECORD button starts recording as set in the Record Mode. Then the REC LED lights and the Recording icon appears on the screen. While recording on HDD is in progress, the HDD LED blinks. During recording, you can stop it by pressing the RECORD button again. If the recording stops, the REC LED goes out. WARNING If the work that needs to stop the recording (time change, file deletion, HDD connection/disconnection, etc.) is executed during recording, the current recording process stops. RECORD SCHEDULE While the Schedule Recording or Schedule/Event Recording is active, the schedule recording automatically starts. When a schedule recording is in progress, the Recording icon appears on the screen.If Event Recording is active, the recording starts at each event. In this case, the recording is executed according to the settings (video size, recording quality, frame rate, pre-alarm, and post-alarm). Even in case of an event, the event recording does not start when the event recording or schedule/event recording is set together with the schedule recording. In case of SHR-5082, only 8 channels are displayed. EVENT RECORDING The followings are event recording cases: Alarm Detection Recording starts when the sensor state is set to N.O or N.C (MENU SETUP > Event Record > Alarm Detection Setup). Motion Detection Recording starts when the motion detection state is set to On (MENU SETUP > Event Record > Motion Detection Setup). Video Loss Detection Recording starts when the video loss state is set to On (MENU SETUP > Event Record > Video Loss Detection Setup). Event Recording Mode When an event occurs, this configures the recording pattern. When the Pre event is set to On, the system records images before any event. Likewise, when the Post-event is set to On, images are recorded after any event. For more information, refer to page 28, “Event Record Duration” recording Cancel OK Record Schedule Holiday Continuous Recording Event Recording Both(Continuous, Event) All S M T W T F S H SHR-5162_Eng.indb 392007-06-18 ソタタ・11:49:11
search & play _41 40_ search & play 09 SEARCH & PLAY search & play _41 40_ search & play 09 SEARCH & PLAY BEFORE USE When you press the SEARCH button, the Search window appears after user validation checkup. Available menus are like the following: Calendar: Searches the recorded video images using the calendar to select the wanted time. Event: Searches the recorded video images using events. Date/Time: Searches the recorded video images using the input date and time. Go To First: Searches the first recorded video image. Go To Last: Searches the latest video image. Backup: Searches the backup video images. It searches the images recorded on the USB HDD or USB memory. The AVI format backup files recorded on USB CD/DVD or built-in CD can be played on PC. CALENDAR SEARCH You can search the recorded video images using the calendar as shown in the picture. In case of SHR-5082, only 8 channels are displayed. To perform a calendar search 1. Use the Direction buttons to select each channel, then press the ENTER button. If you press CH >, all channels are selected. 2. Use the Direction buttons and ENTER button to select the wanted year and month. If any recordings are stored for the selected month, the corresponding dates are highlighted in the calendar. If you press or , the year value changes. 3. Use the Direction buttons and ENTER button to mark the wanted dates. 4. Use the DOWN direction button to move to the time bar, and use the LEFT and RIGHT direction buttons to place the cursor to the wanted time block. Then press the ENTER button for selection. The scales of time bar are displayed at 30 minutes each. 5. Press OK to search the wanted image data. If the selected time block has no images, the system displays no picture. EVENT SEARCH This function searches recorded results such as normal recording, schedule recording, alarm recording, motion recording, and video loss recording on the channel and time basis. In case of SHR-5082, only 8 channels are displayed. search and play SearchCalendar Event Date/Time Go to First Go to Last Backup Move/Control SelectExit Cancel OK Calendar Sun Mon Tue Wed Thu Fri Sat Prev First Last Next Cancel Start Event Search (Can Select 1 Event) No. Date/Time Event Mode SHR-5162_Eng.indb 402007-06-18 ソタタ・11:49:15
search & play _41 40_ search & play 09 SEARCH & PLAY search & play _41 40_ search & play 09 SEARCH & PLAY To perform an event search 1. Use the UP/DOWN direction buttons to place the cursor to the wanted channel and press the ENTER button. Then the recorded events are displayed below. Each event contains the date/time and event mode (normal recording, schedule recording, etc.). Only one channel can be selected. 2. Use the DOWN direction button to move to the event table and press the ENTER button to select an event. The selected event is marked. Selection of multiple items is not allowed. 3. Use the Direction buttons to select Start then press the ENTER button. Then the recorded images are played on the screen. To cancel the search, select Cancel and press the ENTER button. If events are listed in multiple pages, select First, Prev, Next, and Last to move to the corresponding page. If you press the SEARCH button while an event recording is played. It returns to the Event Search menu. This lets you search other events easier and faster. DATE TIME SEARCH This function is used to search the video images for the specific time you want. Up to 16 channels can be searched at once. In case of SHR-5082, only 8 channels are displayed. To perform a date/time search 1. Use the UP/DOWN direction buttons to place the cursor to the wanted camera and press the ENTER button. The selected c amera is marked. Selection of multiple items is possible. 2. Use the DOWN direction button to move to t he time box. To set the time you want, press the ENTER button. Then the year value is highlighted for change. To change the value, use the UP/DOWN direction buttons. You can also change values for month, date, hour, minute, and second using the UP/ DOWN direction buttons. To move between items, use the LEFT/RIGHT buttons. 3. Now use the RIGHT direction button to move to Start and press the ENTER button. If the designated time has any recorded images, they are played on the screen. If multiple cameras are selected, they are played on 4, 9, or 16-split screen. If you want to cancel the search, select Cancel and press the ENTER button. GO TO FIRST SEARCH This function is used to search the oldest recorded files for cameras. Up to 16 channels can be searched at once. In case of SHR-5082, only 8 channels are displayed. To perform this function 1. Use the UP/DOWN direction buttons to place the cursor to the wanted camera and press the ENTER button. The selected c amera is marked. Selection of multiple items is possible. If you want to move to the next page for selecting the other cameras, press 9-16. 2. Now press Start to play the oldest images. If multiple cameras are selected, they are played on 4, 9, or 16-split screen. If you want to cancel the search, select Cancel and press the ENTER button. Cancel Start Date/Time Cam. Start Date/Time End Date/Time 9-16 2007-03-10 08:38:58 2007-03-10 08:38:58 2007-03-11 09:43:51 2007-03-10 08:38:58 2007-03-11 09:43:51 2007-03-10 08:38:58 2007-03-11 09:43:51 2007-03-10 08:38:58 2007-03-11 09:43:51 2007-03-10 08:38:58 2007-03-11 09:43:51 2007-03-10 08:38:58 2007-03-11 09:43:51 2007-03-10 08:38:58 2007-03-11 09:43:51 2007-03-10 08:38:58 2007-03-11 09:43:51 Cancel Start Go to First Cam. Start Date Start Time 9-16 2007-03-10 08:38:58 2007-03-10 08:38:58 2007-03-10 08:38:58 2007-03-10 08:38:58 2007-03-10 08:38:58 2007-03-10 08:38:58 2007-03-10 08:38:58 2007-03-10 08:38:58 SHR-5162_Eng.indb 412007-06-18 ソタタ・11:49:16
search & play _43 42_ search & play 09 SEARCH & PLAY search & play _43 42_ search & play 09 SEARCH & PLAY GO TO LAST SEARCH In case of SHR-5082, only 8 channels are displayed. To perform this function 1. Use the UP/DOWN direction buttons to place the cursor to the wanted camera and press the ENTER button. The selected c amera is marked. Selection of multiple items is possible. If you want to move to the next page for selecting the other cameras, press 9-16. 2. Now press Start to play the latest images. If multiple cameras are selected, they are played on 4, 9, or 16-split screen. If you want to cancel the search, select Cancel and press the ENTER button. BACKUP SEARCH This function is used to search the backup files on the backup devices. First of all, you have to select a back device from the pop-up menu. To perform this function 1. Use the UP/DOWN direction buttons to place the cursor to the wanted backup file and press the ENTER button. The selected backup file is marked. Selection of multiple items is possible. 2. After selections are made, use the DOWN direction button to select Start. If multiple pages are available, select Prev or Next to move to the corresponding page. CAUTION AVI-format backup files cannot be played back on this DVR but only the PC Media Player can play the files. PLAYBACK In order to play the recorded file stored on the HDD, press the PLAY/PAUSE button. If you have played back a file by using the SEARCH button just before, the system would keep the playback information. Press the PLAY/PAUSE button again, the channel kept in memory is played. If you press the PLAY/PAUSE button when no playback is tried, the Search menu appears. When the MENU SETUP window is displayed, pressing the PLAY/PAUSE button does not bring any operation. For playback operation, exit from the MENU first. To stop playing a recorded file, press the STOP button. If you press the PLAY/PAUSE button again, the playback will resume from the point where the previous playback has stopped. When the data position reaches the end of HDD during playback, the playback will pause. Cancel Start Go to Last Cam. End Date End Time 9-16 2007-03-11 09:43:51 2007-03-11 09:43:51 2007-03-11 09:43:51 2007-03-11 09:43:51 2007-03-11 09:43:51 2007-03-11 09:43:51 2007-03-11 09:43:51 2007-03-11 09:43:51 Prev Next Cancel Start 2007-03-02 11:04:34 Backup Search (Can Select 1) No. Folder/Filename 20070302/1104 20070303/1412 20070304/1645 20070304/1705 20070304/1905 2007-03-10 08:38:59 CAM_01 SHR-5162_Eng.indb 422007-06-18 ソタタ・11:49:19
search & play _43 42_ search & play 09 SEARCH & PLAY search & play _43 42_ search & play 09 SEARCH & PLAY Playback mode You can change the screen display method using the MODE button and NUMERIC buttons as shown in the figure. The 16-split, 12+1 split, and 15+1 split screens are shown only in SHR-5162. - Single screen: Comes up when you select and play only 1 channel using the Search menu. - 4-split screen: Comes up when you select and play 2 to 4 channels using the Search menu. - 9-split screen: Comes up when you select and play 5 to 9 channels using the Search menu. - 1 6-split screen: Comes up when you select and play 16 channels using the Search menu. - PIP screen: Comes up when you press the MODE button while playing on a single screen. (The main screen displays the playback channel, and the sub screen displays the live channel.) You can move the sub screen up or down using the UP/ DOWN direction buttons. When you press the ENTER button, a blue bar appears on the live screen. To change the channel in the sub screen, press the desired channel number using the NUMERIC buttons on the front panel or remote control. - N+1 split screen: Shows x number of (N) live channels and 1 play channel on the screen. In the case of 9+1 split screen, you can set the location of the play channel from the menu. Speed play To play the recorded images at a faster speed, press the Fast Forward ( ) or Fast Rewind ( ) button during playback to see the screen at x2, x4, x8, x16, x32, and x64 speed forwardly or reversely. Viewing still images If you press the Fast Forward ( ) or Fast R ewind ( ) button while the screen is paused, you can see still images forwardly or reversely. During reverse search, the interval between cuts may vary depending on the recording specification. Audio playback Audio data can be played or recorded only in 4 channels (CH1, CH2, CH3, and CH4). So to hear the sound of the recorded file, change the channel to any of CH1, CH2, CH3, and CH4. In a split screen (5, 9, or 16-split screen), to select an audio channel, press the ENTER button and move the displayed blue bar to any of four channels. Using the AUDIO button, you can activate or deactivate the audio playback. When the audio function is active, the audio sign on the screen turns yellow. When the audio function is disabled, the audio sign on the screen turns white. 16/9/4 split Live channel Play channel Mode button Number buttons Single PIP8 +1 split 12 +1 split 15 +1 split SHR-5162_Eng.indb 432007-06-18 ソタタ・11:49:21
44_ Smart Viewer INTRODUCTION Smart Viewer is a program to be installed on your PC. Using this program, you can monitor the video and audio data in real time through the network environment without accessing the site where the product is installed. MAIN FEATURES MPEG-4 Video Compression: It provides good video quality. G.711 Voice Compression: It provides good audio quality and use of directional MIC can improve the quality of remote voice. Transmission of video/audio streams through RTP (Real-Time Transport P rotocol): The real-time video playback feature is excellent and the transmission speed is not lowered abruptly even in multi-user connection. C ommands & controls by RTSP (Real-Time Streaming Protocol): It enables safety control through the network. Multiple transport protocols are supported (TCP/IP and UDP (Unicast, Multicast)). Access to video and audio data by entering IP address only. Real-time recording (*.dvr format) on PC and recorded video data conversion into frame unit (JPEG format). Up to 3 users can connect to the DVR simultaneously. (If the multicast is used, up to 6 users can connect.) A Smart Viewer can connect to 16 DVRs simultaneously. The Smart Viewer is optimized for the resolution of 1024x768. PC SPECIFICATION (RECOMMENDED) OS: Win2000 and WinXP Recommendation - DVR Pentium 3, 1GHz or higher - RAM 256 MB or higher - VGA RAM 32Mb or higher - DirectX 8.1 or higher The number of playback frames may vary depending on the recording rate, video size, and PC specification. For the d etailed specification, refer to Appendix 5. Smart Viewer INSTALLATION 1. Insert the Smart Viewer program CD into the CD ROM drive. 2. Open the Smart Viewer folder. 3. Execute the “Setup.exe” file. 4. Click Next >. Smart Viewer SHR-5162_Eng.indb 442007-06-18 ソタタ・11:49:25
Smart Viewer _45 10 Smart Viewer 5. After reading the license agreement, click Yes to proceed to next step. 6. Set the destination folder to install the Smart Viewer program and click Next. 7. The installation process proceeds with setup file installation and system setup. 8. When installation is complete, click Finish to exit from the process. Smart Viewer PROGRAM EXECUTION Double-click the Smart Viewer icon on the Desktop to execute the program. SHR-5162_Eng.indb 452007-06-18 ソタタ・11:49:26
46_ Smart Viewer Smart Viewer INITIAL SCREEN 1 23 4 6 11 14 13 128 9 5 7 10 1. This screen shows the monitoring sites. 2. Using these buttons, you can enter the Search mode in which you can search and play the remote video file that has been recorded on your DVR and enter the Monitoring mode for real-time monitoring. 3. These buttons minimize and exit the program. 4. It displays the current date, day, and time. 5. This button is used for connection to the preset DVR or site. 6. These buttons let you select the event message display window and camera connection state display window. 7. This window displays the event messages from the DVR in real time. 8. These buttons let you select the wanted split screen or auto sequencing screen. 9. This button opens the Setup Mode window to change the Smart Viewer settings. (Refer to “Setup Mode.”) 10. This button lets you choose a favorite function when connecting to a site. 11. This button is used for connecting to Callback. 12. These buttons enable you to perform the PTZ-related operations. 13. These buttons display the status of the current channels. 14. These buttons let you adjust the audio volume and video brightness/contrast, and save the video images. SETUP MODE 13 2 4 SHR-5162_Eng.indb 462007-06-18 ソタタ・11:49:30