Samsung Syncmaster 152v Quick Start Guide

English > Main > Setup > Connecting Your Monitor      
Connecting 
Your Monitor
Installing the 
Monitor Driver
Installing VESA 
compliant mounting
 
 
 1. Connect the DC Adapter for your monitor to the power port on the back of\
 the monitor.   Plug the power cord for the monitor into a nearby outlet. 
2. Connect the signal cable to the 15-pin, D-sub connector on the back of y\
our monitor. 
3. Connect the monitor to the Macintosh computer using the D-SUB connection\
 cable. 
4. In the case of an old...

English > Main > Setup > Connecting Your Monitor      
Connecting 
Your Monitor
Installing the 
Monitor Driver
Installing VESA 
compliant mounting
 
 1. Connect the power cord for your monitor to the power port on the back of\
 the monitor.   Plug the power cord for the monitor into a nearby outlet. 
2. Connect the signal cable to the 15-pin, D-sub connector on the back of y\
our monitor. 
3. Connect the audio cable for your monitor to the audio port on the back o\
f your computer. 
4. Connect the...

Connecting Your 
Monitor
Installing the 
Monitor Driver
Installing VESA 
compliant mounting
 
 
 
When prompted by the operating system  for the monitor driver, insert the CD-ROM 
included with this monitor. Driver installation is slightly different fr\
om one operating 
system to another. Follow the directions as appropriate for the operatin\
g system you 
have.  
 
Prepare a blank disk and download the driver program file at the Interne\
t web site shown 
here. 
zInternet web site :...

 
 
4. Click the Install button in the Warning window. 
 
 
5. If you can see following Message window, then click the Continue Anyway button. 
Then click OK button. 
 
 
This monitor driver is under certifying MS logo,and this installation dont damage your 
system.The certified driver will be posted on Samsung Monitor Homepage  
http://www.samsung-monitor.com/.  
6. Monitor driver installation is completed.  
 

Connecting Your 
Monitor
Installing the 
Monitor Driver
Installing VESA 
compliant mounting
 
 
When prompted by the operating system for the monitor driver, insert the CD-ROM 
included with this monitor. Driver installation is slightly different fr\
om one operating 
system to another. Follow the directions as appropriate for the operatin\
g system you 
have.  
 
Prepare a blank disk and download the driver program file at the Interne\
t web site shown 
here. 
zInternet web site :...

     
 
5. Click Update Driver.. and select Install from a list or.. then click Next button. 
     
 
6. Select Dont search ,I will.. then click Next and then click Have disk. 
     
7. Click the Browse button then choose A:(D:\Driver) and choose your monitor model in the 
model list and click the Next button. 
     
 
8. If you can see following Message window, then click the Continue Anyway button. Then 
click OK button. 
 
 
 

 
This monitor driver is under certifying MS logo,and this installation do\
nt damage your 
system.The certified driver will be posted on Samsung Monitor Homepage  \
http://www.samsung-monitor.com/.  
9. Click the  Close button then click  OK button continually. 
 
 
     
 
10. Monitor driver installation is completed.  
Microsoft® Windows® 2000 Operating System
When you can see Digital Signature Not Found on your monitor, follow t\
hese steps.
1. Choose  OK button on the  Insert disk window.  
2....

4. Select the Monitor tab.  
5. Click the  Change button in the  Monitor Type area.  
6. Choose  Specify the location of the driver .  
7. Choose  Display a list of all the driver in a specific location..  then click Next button.  
8. Click the  Have Disk button  
9. Specify A:\(D:\driver) then click  OK button.  
10. Select  Show all devices  and choose the monitor that corresponds to the one you 
connected to your computer and click  OK.  
11. Continue choosing  Close button and  OK button until you...

Align the Mounting Interface Pad with the holes in the Rear Cover Mounti\
ng Pad and secure it with 
the four screws that came with the arm-type base, wall mount hanger or o\
ther base.
 

Connecting Your 
Monitor
Installing the 
Monitor Driver
Installing VESA 
compliant 
mounting 
Removing the base
1. Turn off your monitor and unplug its power cord.  
2. Lay the LCD monitor face-down on a flat surface with a cushion beneath i\
t to protect the screen.  
3. Remove the two screws and then remove the Stand from the LCD monitor.  
Attaching a base
NOTE: This monitor accepts a 75mm x 75mm VESA-compliant mounting interfa\
ce pad.
 
1. Rear cover mounting pad  
2. Mounting interface pad  
Align...