Samsung Ud55ep Manual
Have a look at the manual Samsung Ud55ep Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
31 Input source control •Function The input source of a product can be changed using a PC. •Viewing input source state (Get Input Source Status) Header Command IDData length Checksum 0xAA 0x14 0 • Setting the input source (Set Input Source) Header Command IDData length DataChecksum 0xAA 0x14 1"Input Source" "Input Source": An input source code to be set on a product. 0x14PC 0x18 DVI 0x0C Input source 0x08 Component 0x20 MagicInfo 0x1F DVI_video 0x30 RF( TV ) 0x40 DT V 0x21 HDMI1 0x22 HDMI1_PC 0x23 HDMI2 0x24HDMI2_PC 0x25 DisplayPort ― DVI_video, HDMI1_PC and HDMI2_PC cannot be used with the Set command. They only respond to "Get" commands. ― This model does not support HDMI1, HDMI1_PC, HDMI2 and HDMI2_PC ports. ―MagicInfo is only available with models that contain the MagicInfo function. ―RF( TV ), DTV are only available with models that include a TV. • Ack Header Command IDData length Ack/Nakr-CMDVal1 Checksum 0xAA 0xFF 3'A'0x14"Input Source" "Input Source": An input source code to be set on a product. • Nak Header Command IDData length Ack/Nakr-CMDVal1Checksum 0xAA 0xFF 3'N'0x14"ERR" "ERR" : A code showing what error has occurred.
32 Screen mode control •Function The screen mode of a product can be changed using a PC. Screen mode cannot be controlled when the Video Wall function is enabled. ― This control can only be used on models that include a TV. • Viewing screen status (Get Screen Mode Status) Header Command IDData length Checksum 0xAA 0x18 0 • Setting the picture size (Set Picture Size) Header Command IDData length Data Checksum 0xAA 0x18 1"Screen Mode" "Screen Mode": A code that sets the product status 0x01 16 : 9 0x04 Zoom 0x31 Wide Zoom 0x0B 4 : 3 • Ack Header Command IDData length Ack/Nakr-CMDVal1 Checksum 0xAA 0xFF 3'A'0x18"Screen Mode" "Screen Mode": A code that sets the product status • Nak Header Command IDData length Ack/Nakr-CMDVal1 Checksum 0xAA 0xFF 3'N'0x18"ERR" "ERR": A code showing what error has occurred Screen size control • Function The screen size of a product can be changed using a PC. •Viewing the screen size (Get Screen Size Status) Header Command IDData length Checksum 0xAA 0x19 0 • Ack Header Command IDData length Ack/Nak r-CMDVal1 Checksum 0xAA 0xFF 3'A' 0x19"Screen Size" "Screen Size": product screen size (range: 0 – 255, unit: inch) • Nak Header Command IDData length Ack/Nak r-CMDVal1 Checksum 0xAA 0xFF 3'N' 0x19"ERR" "ERR": A code showing what error has occurred
33 PIP On/Off control •Function The PIP mode of a product can be turned on or off using a PC. ― Only available on models that have the PIP function. ―The mode cannot be controlled if Video Wall is set to On . ― This function is not available in MagicInfo. • Viewing PIP on/off state (Get the PIP ON / OFF Status) Header Command IDData length Checksum 0xAA 0x3C 0 • Setting PIP on/off (Set the PIP ON / OFF) Header Command IDData length DataChecksum 0xAA 0x3C 1"PIP" "PIP": A code used to turn the PIP mode of a product on or off 1: PIP ON 0: PIP OFF • Ack Header Command IDData length Ack/Nak r-CMDVal1 Checksum 0xAA 0xFF 3'A' 0x3C"PIP" "PIP": A code used to turn the PIP mode of a product on or off • Nak Header Command IDData length Ack/Nak r-CMDVal1 Checksum 0xAA 0xFF 3'A' 0x3C"PIP" "ERR": A code showing what error has occurred Auto adjustment control (PC and BNC only) • Function Automatically adjust the PC system screen using a PC. •Viewing auto adjustment state (Get Auto Adjustment Status) None • Setting auto adjustment (Set Auto Adjustment) Header Command IDData length Data Checksum 0xAA 0x3D 1"Auto Adjustment" "Auto Adjustment" : 0x00 (at all times) • Ack Header Command IDData length Ack/Nak r-CMDVal1 Checksum 0xAA 0xFF 3'A' 0x3D"Auto Adjustment" • Nak Header Command IDData length Ack/Nak r-CMDVal1 Checksum 0xAA 0xFF 3'A' 0x3D"ERR" "ERR": A code showing what error has occurred
34 Video Wall Mode Control •Function Video Wall mode can be activated on a product using a PC. This control is only available on a product whose Video Wall is enabled. • Viewing video wall mode (Get Video Wall Mode) Header Command IDData length Checksum 0xAA 0x5C 0 • Setting the video wall (Set Video Wall Mode) Header Command IDData length Data Checksum 0xAA 0x5C 1"Video Wall Mode" "Video Wall Mode": A code used to activate Video Wall mode on a product 1: Full 0: Natural • Ack Header Command IDData length Ack/Nak r-CMDVal1 Checksum 0xAA 0xFF 3'A' 0x5C"Video Wall Mode" "Video Wall Mode": A code used to activate Video Wall mode on a product • Nak Header Command IDData length Ack/Nak r-CMDVal1 Checksum 0xAA 0xFF 3'A' 0x5C"ERR" "ERR": A code showing what error has occurred Safety Lock • Function PC can be used to turn the Safety Lock function on or off on a product. This control is available regardless of whether or not the power is turned on. • Viewing the safety lock state (Get Safety Lock Status) Header Command IDData length Checksum 0xAA 0x5D 0 • Enabling or disabling safety lock (Set Safety Lock Enable / Disable) Header Command IDData length Data Checksum 0xAA 0x5D 1"Safety Lock" "Safety Lock": Safety lock code to be set on a product 1: ON 0: OFF • Ack Header Command IDData length Ack/Nak r-CMDVal1 Checksum 0xAA 0xFF 3'A' 0x5D"Safety Lock" "Safety Lock": Safety lock code to be set on a product • Nak Header Command IDData length Ack/Nak r-CMDVal1 Checksum 0xAA 0xFF 3'N' 0x5D"ERR" "ERR": A code showing what error has occurred
35 Video Wall On •Function Turn Video Wall on or off on the product from your computer. •Get Video Wall On/Off Status Header Command IDData length Checksum 0xAA 0x84 0 • Set Video Wall On/Off Header Command IDData length Data Checksum 0xAA 0x84 1V.Wall_On • V.Wall_On: Video Wall code to be assigned to the product 1: Video Wall ON 0: Video Wall OFF • Ack Header Command IDData length Ack/Nakr-CMDVal1Checksum 0xAA 0xFF 3'A'0x84V.Wall_ On V.Wall_On : Same as above • Nak Header Command IDData length Ack/Nakr-CMDVal1 Checksum 0xAA 0xFF 3'N'0x84ERR "ERR": A code showing what error has occurred Video Wall User Control • Function Turn the Video Wall function on or off on the product from your computer. •Get Video Wall Status Header Command IDData length Checksum 0xAA 0x89 0 • Set Video Wall Header Command IDData length Val1Val2Checksum 0xAA 0x89 2Wall_DivWall_SNo Wall_Div: Video Wall Divider code assigned to the product
36 10x10 Video Wall Model 123456789101112131415 Off 0x00 0x000x000x000x000x000x000x000x000x000x000x000x000x000x00 10x11 0x120x130x140x150x160x170x180x190x1A0x1B0x1C0x1D0x1E0x1F 20x21 0x220x230x240x250x260x270x280x290x2A0x2B0x2C0x2D0x2E0x2F 30x31 0x320x330x340x350x360x370x380x390x3A0x3B0x3C0x3D0x3E0x3F 40x41 0x420x430x440x450x460x470x480x490x4A0x4B0x4C0x4D0x4E0x4F 50x51 0x520x530x540x550x560x570x580x590x5A0x5B0x5C0x5D0x5E0x5F 60x61 0x620x630x640x650x660x670x680x690x6A0x6B0x6C0x6D0x6E0x6F 70x71 0x720x730x740x750x760x770x780x790x7A0x7B0x7C0x7D0x7EN/A 80x81 0x820x830x840x850x860x870x880x890x8A0x8B0x8CN/AN/AN/A 90x91 0x920x930x940x950x960x970x980x990x9A0x9BN/AN/AN/AN/A 100xA1 0xA20xA30xA40xA50xA60xA70xA80xA90xAAN/AN/AN/AN/AN/A 110xB1 0xB20xB30xB40xB50xB60xB70xB80xB9N/AN/AN/AN/AN/AN/A 120xC1 0xC20xC30xC40xC50xC60xC70xC8N/AN/AN/AN/AN/AN/AN/A 130xD1 0xD20xD30xD40xD50xD60xD7N/AN/AN/AN/AN/AN/AN/AN/A 140xE1 0xE20xE30xE40xE50xE60xE7N/AN/AN/AN/AN/AN/AN/AN/A 150xF1 0xF20xF30xF40xF50xF6N/AN/AN/AN/AN/AN/AN/AN/AN/A
37 Wall_SNo: Product Number code assigned to the product 10x10 Video Wall Model : ( 1 ~ 100) Set NumberData 1 0x01 2 0x02 ... ... 99 0x63 100 0x64 • Ack Header Command IDData length Ack/Nakr-CMDVal1 Val2Checksum 0xAA 0xFF 4'A'0x89Wall_Div Wall_SNo • Nak Header Command IDData length Ack/Nakr-CMDVal1 Checksum 0xAA 0xFF 3'N'0x89ERR "ERR": A code showing what error has occurred
38 Connecting and Using a Source Device Before Connecting Pre-connection Checkpoints ―Before connecting a source device, read the user manual provided with it. The number and locations of ports on source devices may differ from device to device. ― Do not connect the power cable until all connections are completed. Connecting the power cable during connection may damage the product. ― Connect the sound ports correctly: left = white and right = red. ―Check the types of ports at the back of the product you want to connect. Connecting to a PC • Do not connect the power cable before connecting all other cables. Ensure you connect a source device first before connecting the power cable. •A PC can be connected to the product in a variety of ways. Select a connection method suitable for your PC. ― Connecting parts may differ in different products. Connection using the D-SUB cable (Analog type) RGB IN AUDIO IN Chapter 03
39 Connection using a Dual-link DVI cable DVI IN (MAGIC INFO) AUDIO IN ―You can use the DVI port on the product as an HDMI port by using a DVI-HDMI adapter. DVI IN (MAGIC INFO) HDMI Connection Using an HDMI-DVI Cable After connecting a computer to the product with an HDMI-DVI cable, make sure to configure the settings as shown below to enable the video and audio from the computer. • Sound → set HDMI Sound to PC(DVI) • Picture → set each screen mode to Te x t under Picture Mode • System → General → set HDMI Hot Plug to Off HDMI IN 1, HDMI IN 2 AUDIO IN
40 Connection Using an HDMI Cable HDMI IN 1, HDMI IN 2 Connection Using an DP Cable DP IN •Precautions for using DP ― To increase the standby power capacity, the product stops DP communication when it is turned off or in power-saving mode. If the product in dual monitor mode is turned off or goes into power-saving mode, monitor setting changes may not be updated. As a result, screen output may not be displayed properly. In the occurrence of this issue, set Max. Power Saving to Off before using the product. ― Some graphics cards that are not compliant with the DP standard may prevent the Windows Booting/Bios screen from being displayed when the product is in power-saving mode. If this is the case, make sure to turn on the product first before turning on your PC. ― The DisplayPort interface (DP IN) on the product and the provided DP cable are designed based on the VESA standards. Using a DP cable that is not VESA compliant may cause the product to function improperly. Samsung Electronics shall not be held responsible for any issues from using a cable that is not VESA compliant. Make sure to use a DP cable that is VESA compliant.