Sanyo Ce32fd90b User Manual

 English   - 10 -
 
 
 
Viewing the Connections - Side Connectors 
 
CI Slot is used for inserting a CI card. A CI card allows you  1. 
to view all the channels that you subscribe to. For more 
information, see “Conditional Access” section.  
Side USB input  
.   2. 
Note: Codec update cannot be performed.
   
Headphone jack is used for connecting an external  3. 
headphone to the system. Connect to the HEADPHONE 
jack to listen to the TV from headphones (optional).  
Video Input is used for connecting...

English   - 11 -
 
 
 
Power Connection 
 
 
IMPORTANT : The TV set is designed to operate on 220-240V AC, 50 Hz. 
  • After unpacking, allow the TV set to reach the ambient room temperature before you connect 
the set to the mains. 
  • Plug the power cable to the mains socket outlet. 
 
Aerial Connection 
 
• Connect the aerial or cable TV plug to the AERIAL INPUT socket located at the rear of the TV. 
 
    
 
REAR VIEW
MB35_[GB]_SSM_32890W_1050UK_UKIDTV_BRONZE3_10062394_50146336.indd...

 English   - 12 -
 
 
 
 
Using Digital Multimedia Connectors
 
• You can connect USB devices to your TV by using the USB input of the TV. This feature allows 
you to display/play JPG and MP3 fi les stored in a USB stick.
• It is possible that certain types of USB devices (e.g. MP3 Players) may not be compatible with 
this TV. 
• You may back up your fi les before making any connections to the TV set in order to avoid any 
possible data loss. Note that manufacturer will not be responsible for any fi le...

English   - 13 -
 
 
 
   
 
Connecting the LCD TV to a PC 
 
For displaying your computer’s screen image on your LCD TV, you can connect your computer 
to the TV set. 
  • Power off both computer and display before making any connections.
• Use 15-pin D-sub display cable to connect a PC to the LCD TV.
• When the connection is made, switch to PC source. See  “Input selection” section.
• Set the resolution that suits your viewing requirements. Resolution information can be found in 
the appendix parts....

 English   - 14 -
 
 
Connecting to a DVD Player 
 
If you want to connect a DVD player to your LCD TV, you can use connectors of the TV set. DVD 
players may have different connectors. Please refer to your DVD player’s instruction book for 
additional information. Power off both the TV and the device before making any connections. 
  Note: Cables shown in the illustration are not supplied. 
 
• If your DVD player has an HDMI socket, you can connect via HDMI. When you connect to DVD 
player as...

English   - 15 -
 
 
Using Side AV Connectors 
 
You can connect a range of optional equipment to your LCD TV. Possible connections are shown 
below. Note that cables shown in the illustration are not supplied. 
   
• For connecting a camcorder, connect to the VIDEO IN socket and the AUDIO SOCKETS.  For 
selecting the related source, see the section “Input selection” in the following parts. 
• To listen the TV sound from headphones, connect to the HEADPHONE jack of theTV. 
 
 
Camcorder Headphone...

 English   - 16 -
 
 
 
Using Other Connectors
 
 
You can connect a range of optional equipment to your LCD TV. Possible connections are shown 
below. Note that cables shown in the illustration are not supplied. 
  • To connect external speakers, use an audio cable. Do not reverse the AUDIO LEFT and AUDIO 
RIGHT jacks. Turn on the LCD TV and external speaker set after all connections are made. 
Refer to your speaker set’s manual for further queries.
• For connecting a to a device that has SPDIF support,...

English   - 17 -
 
 
 
 
Connecting Other Equipment via Scart
 
 
Most devices support SCART connection. You can connect a; DVD recorder, a VCR or a decoder 
to your LCD TV by using the SCART sockets. Note that cables shown in the illustration are not 
supplied. 
Power off both the TV and the devices before making any connections.
For more information, refer to your device’s own instruction book. 
  REAR VIEW 
 
 
 
Scart sockets
Decoder
DVD RecorderVideo Recorder...

English   - 18 -
 
 
Inserting Batteries in the 
Remote Control Handset
   
• Remove the battery cover located on the back 
of the handset by gently pulling backwards 
from the indicated part.
   
• Insert two  AAA/R3 
 or equivalent type batteries 
inside. Place the batteries in the right directions 
and replace the battery cover. 
 
 
   
Note 
: Remove the battery from remote control 
handset when it is not to be used for a long period. 
Otherwise it can be damaged due to any leakage of 
batteries....

English   - 19 -
 
 
 
 
Input Selection
 
 
Once you have connected external systems 
to your TV, you can switch to different input 
sources. 
  • Press “
” button on your remote control for 
directly changing sources. 
  or,
   
• Select “Source” option from the main menu 
by using “
” or “” button. Use then “” or 
“
” button to highlight an input and press “
” button to select. 
   
Note 
: You can mark desired source options by 
pressing the  OK 
 button. Therefore, when “
” button 
is pressed, only...