Sanyo Dsr 3716 P Manual
Have a look at the manual Sanyo Dsr 3716 P Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 550 Sanyo manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
English Viewing recorded video How to use 20 The zoom function is not available in multi-screen (4/9/16), plus screen mode or on the monitor connected to MON2. Images become coarser during zooming. 1Press the ZOOM button. A zoom frame appears in the center of the screen. Live video can be magnified during surveillance. 2Move the zoom frame to the area to be enlarged. 1Turn the J-dial to move the frame horizontally. 2Turn the S-dial clockwise, and then turn the J-dial to move the frame vertically. 3Turn the S-dial clockwise. The area enclosed by the zoom frame is enlarged by a factor of 2. 4Press the ZOOM button to cancel the zoom function.If video is recorded from a number of cameras, the recorded videos can be played back in a quad-screen format. 1Press the QUAD button during playback. Videos recorded from camera numbers 1~4 are displayed in quad-screen format. 2Press the QUAD button repeatedly. The monitor display switches to quad-screen mode. Press the camera selection button to return to full-screen display. ☞DSR-3709PA: The order of quad-screen images is 1~4, 5~8, 9~3. If video is recorded from a number of cameras, the recorded videos can be played back in a multi-screen format. 1Press the MULTI button during playback. Videos recorded from camera numbers 1~9 are displayed in multi-9 format. 2Press the MULTI button repeatedly. The display switches between multi-16 and multi-9 modes. Press the camera selection button to return to full-screen display. ☞The DSR-3709PA cannot be used in multi-16 screen mode. ☞Refer to P74 for information about rearranging the position of the screens. Enlarged viewing ZOOM 02 Quad-screen viewing Multi-screen (9/16) viewing 0201 0403 1413 1615 QUAD 0302 0506 01 04 070809 12 16 03 04 13 14 1507 08 09 10 11 12 0102 0506 MULTI
English
21 How to use
Video stored in the normal recording area, alarm recording area or archive recording area can be located by searching and then
played back.
Use one of the five search methods to locate the required video.
ALARM SEARCH ->
ALARM THUMBNAIL SEARCH ->
TIME/DATE SEARCH ->
ARCHIVE AREA SEARCH ->
MOTION DETECTION SEARCH ->
MOVE:JOG SELECT:SHUTTLE
NO DATE TIME CH TOTAL ALARMS
0016 05-01 09:53 1 00016
0015 05-01 09:53 1
0014 05-01 09:53 1
0013 05-01 09:53 1
0012 05-01 09:52 1
0011 05-01 09:51 1
0010 05-01 09:51 1
0009 05-01 03:10 1
MOVE:JOG SELECT:SHUTTLE
RECORDING TOP : 16-01-06 14:46
RECORDING END : 19-01-06 13:32
CHANNEL : --
SEARCH :
DATE TIME
16-01-06 14:46
PREVIEW ->
VIEW ->
CHANGE:JOG SET:SHUTTLE
NO DATE START CH CAPACITY
0001 01-01 01:48 1 TOTAL - 816MB
0002 05-01 09:53 1 USED - 16MB
0003 01-01 02:41 1
0004 02-01 03:10 1
0005 02-01 04:25 1
0006 04-01 02:40 1
0007 04-01 01:25 1
0008 04-01 01:25 1
MOVE:JOG SELECT:SHUTTLE
SEARCH FROM : ALARM
START : 01-01-06 00:40
END : 05-01-06 10:17
CHANNEL : --
START PREVIEW ->
MOVE:JOG SELECT:SHUTTLE
SEARCH FROM : ALARM / CHANNEL : 4
START :
05-01-06 10:00
END :
05-01-06 10:17
MOTION SENSOR ->
PREVIEW ->
VIEW ->
MOVE:JOG SELECT:SHUTTLE
001100110011 0016
00160015001500140014
0013001300120012
001000100009000900080008
0016 0015 0014
0013 0012
0010 0009 0008
SEARCHPress the SEARCH button:
The screen appears.
Searching is not possible
during playback and menu
display.
Note: During playback of video, the S-dial,
the J-dial and the front panel
buttons can be used for operations
such as pause and fast-forward.
AAlarm search (P22)
Searches and plays alarm video from the
recording list based on date and time.
Searches and plays all video stored in the alarm
recording area. If pre-alarm video was also
recorded, then the video immediately before the
alarm can be viewed, too.
B
Alarm thumbnail search (P22)
Searches and plays alarm video from the
thumbnail list based on alarm number.
The videos recorded in the alarm recording area
are displayed in the thumbnail list.
C
Date/time search (P23)
Searches the recorded video period based on
date and time.
Video stored in the normal recording area (by
normal recording or timer-controlled recording)
and in the alarm recording area can be played
back by specifying the date and time.
D
Archive area search (P24)
Searches and plays back video stored in the
archive recording area based on date and time.
Plays back video stored in the archive area.
E
Motion detection search (P24)
Searches and plays back video of moving
objects detected by motion sensors. By setting
the motion sensor back to its original location,
and specifying the date and time, motion
detections at a certain sensor can be
investigated.
J (jog) dial S (shuttle) dial
Searching for recorded video
English
Searching for recorded video
How to use 22
1Press the SEARCH button during recording or live
video.
2Turn the J-dial, select ALARM SEARCH, and turn
the S-dial clockwise.
The screen is displayed.
The eight most recent alarm recordings are displayed.
☞Press the SEARCH button to cancel the search
mode.
Operation returns to the normal screen.
(Menu item - Description)
1NO:
Displays the alarm number.
2DATE/TIME:
Displays the date and time at which the alarm video was
recorded.
3CH:
Displays the channel (camera number) of the alarm video.
4TOTAL ALARMS:
Displays the total number of alarm videos recorded.
5Preview screen:
Displays the selected alarm video.
3Turn the J-dial to move the cursor to the NO you
want to play and then turn the S-dial clockwise.
First, the preview screen displays the video recorded at
the moment of the alarm occurrence, and then the
selected video is played in full-screen mode. When the
selected video is over, playback pauses.
4Press the PLAY/STOP button.
1Press the SEARCH button during recording or live
video.
2Turn the J-dial, select ALARM THUMBNAIL
SEARCH, and turn the S-dial clockwise.
The nine most recent alarm videos are displayed.
An alarm number is displayed for each alarm video, and
the number of the selected alarm will start blinking.
☞Press the SEARCH button to cancel the search
mode.
Operation returns to the normal screen.
3Turn the J-dial, select the desired alarm number
(blinks), and turn the S-dial clockwise.
The selected video is played in full-screen mode. When
the selected video is over, playback pauses.
4Press the PLAY/STOP button.
bViewing pre-alarm video
After beginning playback of an alarm recording identified by
an alarm search, turn the S-dial counterclockwise.
AAlarm search
NO DATE TIME CH TOTAL ALARMS
0016 05-01 09:53 1 00016
0015 05-01 09:53 1
0014 05-01 09:53 1
0013 05-01 09:53 1
0012 05-01 09:52 1
0011 05-01 09:51 1
0010 05-01 09:51 1
0009 05-01 03:10 1
MOVE:JOG SELECT:SHUTTLE
ALARM SEARCHSEARCH
12 3 45
(S-dial)
(J-dial)
(S)
(J)
PLAY/STOP
BAlarm thumbnail search
Identical to alarm searching, playback is only
possible within each individual alarm recording. Play
the previous and next alarm recordings using the
ALARM buttons.
The S-dial, the J-dial and the front panel buttons can
be used for operations such as pause and
fast-forward.
001100110011 0016
00160015001500140014
0013001300120012
001000100009000900080008
0016 0015 0014
0013 0012
0010 0009 0008
ALARM THUMBNAIL SEARCHSEARCH
(S-dial)
(J-dial)
(S)
(J)
PLAY/STOP
ALARM
English
Searching for recorded video
23 How to use
1Press the SEARCH button during recording or live
video.
2Turn the J-dial, select TIME/DATE SEARCH, and
turn the S-dial clockwise.
The cursor moves to CHANNEL.
☞Press the SEARCH button to cancel the search
mode.
Operation returns to the normal screen.
(Menu item - Description)
1RECORDING TOP/RECORDING END:
Automatically displays the date/time of the first and the last
(most recent) recorded videos. These fields cannot be
modified.
2CHANNEL:
Used to set the channel (camera number) for playback.
3SEARCH:
Used to set the date/time for playback.
4PREVIEW:
When selected, displays the preview screen.
5VIEW:
When selected, plays the previewed recording in
full-screen mode.
6Preview screen area
3Searching by date and time.
Example: Recording from camera 3 from 8:30pm
on October 26, 2006
1Turn the S-dial clockwise.
2Select 03 by turning the J-dial, and turn the
S-dial clockwise.
3Select the number using the J-dial, and then turn
the S-dial clockwise to set it. Repeat the
procedure until the entire date/time setting is
complete.The cursor moves to PREVIEW.
4Turn the S-dial clockwise.
A search progress bar is displayed during searching,
followed by recording of the specified date and time
displayed in the preview screen.
☞If no recording exists for the specified time:
The recording closest to the specified time is
displayed.
bViewing the preview screen
Turn the J-dial, select VIEW, and turn the S-dial
clockwise.
The selected video is played in full-screen mode.
CDate/time search
RECORDING TOP : 16-01-06 14:46
RECORDING END : 19-01-06 13:32
CHANNEL : --
SEARCH :
DATE TIME
16-01-06 14:46
PREVIEW ->
VIEW ->
CHANGE:JOG SET:SHUTTLE
TIME/DATE SEARCHSEARCH
(J)(S)
1
2
4 3
5
6
RECORDING TOP : 01-10-06 14:46
RECORDING END : 30-10-06 13:32
CHANNEL : 05
SEARCH :
DATE TIME
26-10-06 20:30
PREVIEW ->
VIEW ->
CHANGE:JOG SET:SHUTTLE
12
3
If a date/time search is performed on alarm recordings
or programmed recordings by specifying the channel,
depending on the recording circumstances, the
desired video may not be found. In this case, try the
date/time search again without specifying the channel.
Start playback, and use fast-forward and fast-reverse
to locate the video from the desired channel.
Note: The retrieved video can be displayed in full-screen mode
without displaying the preview screen by entering the date
and the time and by selecting VIEW.
The S-dial, the J-dial and the front panel buttons can be
used for operations such as pause and fast-forward.
If CHANNEL is set to --, then playback will be displayed
in multi-screen mode.
26-10-06 20:30
(J)(S)Day Year Hour
Month Minutes Day
RECORDING TOP : 01-10-06 14:46
RECORDING END : 30-10-06 13:32
CHANNEL : 05
SEARCH :
DATE TIME
26-10-06 20:30
PREVIEW -> SEARCHING
VIEW ->
CHANGE:JOG SET:SHUTTLE
English
Searching for recorded video
How to use 24
Plays back video stored in the archive area.
1Press the SEARCH button during recording or live
video.
2Turn the J-dial, select ARCHIVE AREA SEARCH,
and turn the S-dial clockwise.
The screen is displayed.
The eight most recent archive recordings are displayed
in the order of archiving.
☞Press the SEARCH button to cancel the search
mode.
Operation returns to the normal screen.
(Menu item - Description)
1NO:
Displays the number of the archive.
2DATE:
Displays the date of recording.
3START:
Displays the start time of recording.
4CH:
Displays the lead channel (camera number) of the recording.
5TOTAL:
Displays the total capacity of the archive area.
6USED:
Displays the amount of the archive area that has been used.
3Select the desired NO by turning the J-dial, and
turn the S-dial clockwise.
The selected video is displayed in the preview screen,
and playback starts in full-screen mode. When the
selected video is over, playback pauses.
4Press the PLAY/STOP button. Select the search area and the channel number on the
screen. Selecting
the will display the screen.
The screen displays
the specified search area and channel number. Set the
start and end date/time, and select MOTION SENSOR to
display the motion sensor setting screen.
On the motion sensor setting screen, set the motion
sensor for the recorded images and detect scenes where
images were changed by intruders etc.
(Menu item - Description)
screen
1SEARCH FROM/START/END
When selecting a recording area for the motion sensor setting, the
date and time of the first and last recording in the selected
recording area will be displayed automatically. These fields cannot
be modified.
Selections:
ALARM: Searches video from the alarm recording area.
NORMAL: Searches video from the normal recording area.
ALARM & NORMAL:
Searches video from the alarm recording area and the normal
recording area.
2CHANNEL
Use this menu item to selects the channel for the motion sensor.
3START PREVIEW
Search is performed based on the above selected area and
channel and the screen is
displayed.
screen
1SEARCH FROM/CHANNEL
Displays the settings selected on the screen.
2START/END
Used to set the start and end time of the search area and
specified channel.
3MOTION SENSOR
Displays the motion sensor setting screen.
4PREVIEW
The video found by the search function is displayed in the preview
area.
5VIEW
The video found by the search function is played in full-screen
mode.
DArchive area search
NO DATE START CH CAPACITY
0001 01-01 01:48 1 TOTAL - 816MB
0002 05-01 09:53 1 USED - 16MB
0003 01-01 02:41 1
0004 02-01 03:10 1
0005 02-01 04:25 1
0006 04-01 02:40 1
0007 04-01 01:25 1
0008 04-01 01:25 1
MOVE:JOG SELECT:SHUTTLE
ARCHIVE AREA SEARCHSEARCH
(J)(S)
12 34 56
PLAY/STOP
EMotion detection search
SEARCH FROM : ALARM
START : 01-01-06 00:40
END : 05-01-06 10:17
CHANNEL : --
START PREVIEW ->
MOVE:JOG SELECT:SHUTTLE
SEARCH FROM : ALARM / CHANNEL : 4
START :
05-01-06 10:00
END :
05-01-06 10:17
MOTION SENSOR ->
PREVIEW ->
VIEW ->
MOVE:JOG SELECT:SHUTTLE
LEVEL : OFF EXIT
11
2
3
4
5 2
3
----------
----------
--- -----
--- -----
--- -----
----------
----------
----------
English
Searching for recorded video
25 How to use
1Press the SEARCH button during recording or live
video.
2Turn the J-dial, select MOTION DETECTION
SEARCH, and turn the S-dial clockwise.
The screen
appears.
The SEARCHING star ts blinking.
☞Press the SEARCH button to cancel the search
mode.
Operation returns to the normal screen.
3Turn the S-dial clockwise.
The ALARM starts blinking.
4Select the desired recording area (example: ALARM
& NORMAL) by turning the J-dial, and then turn the
S-dial clockwise.
SEARCHING of END starts blinking again, the search
is over.
Selections: ALARM/NORMAL/ALARM & NORMAL
5Select a channel by turning the J-dial and then turn
the S-dial clockwise.
The – – starts blinking.
6Select the desired channel (example: camera 4) by
turning the J-dial, and then turn the S-dial
clockwise.
The cursor moves to the START PREVIEW field.
7Turn the S-dial clockwise.
The screen switches to the screen, and the channel 4 preview screen
is displayed.
8Turn the S-dial clockwise, and set the number using
the J-dial. Turn the S-dial clockwise again, and
repeat this to set the date and time for the start of
the search.
Example: October 28, 2006 8:30pm
When the settings are complete, turn the S-dial
clockwise.
9Repeat the same steps as shown at 8 to set the
end date and time for the search.
Example: November 29, 2006 8:30pm
The cursor moves to the MOTION SENSOR field.
ÀTurn the S-dial clockwise.
The motion sensor setting screen is displayed.
ÁSetting the motion sensor
1Turn the J-dial to move the cursor to the desired
position of the sensor, and then turn the S-dial
clockwise.
–: Sensor is not set
ú: Sensor is set
After switching the sensor from unset to set, the
same operation can be used to set sensors at other
locations.
2Turn the J-dial to move the cursor to LEVEL:
OFF, and then turn the S-dial clockwise.
The OFF starts blinking.
Selections: OFF/1/2/.../9/10 (low sensitivity)
3Turn the J-dial to set LEVEL: OFF to [5], and
then turn the S-dial clockwise twice.
The screen
returns.
For searching the PREVIEW or VIEW screens,
continue at P26 without exiting the current search.
ÂPress the SEARCH button to exit the search mode.
The normal live video display returns.
EMotion detection search (continued)
SEARCH
(J)(S)
SEARCH FROM : ALARM
START : 01-01-06 00:40
END : 05-01-06 10:17
END : SEARCHING
MOTION DETECTION SEARCH
CHANNEL : --
START PREVIEW ->
START :
28-10-06 20:30
If you set the motion search to a specific channel
(camera number), only the video from the specified
channel will be played. The camera title, date and time
may not be displayed fully on the screen.
END :
29-11-06 20:30
SEARCH FROM : ALARM & NORMAL/ CHANNEL : 4
START :
28-10-06 20:30
END :
29-11-06 20:30
MOTION SENSOR ->
PREVIEW ->
VIEW ->
MOVE:JOG SELECT:SHUTTLE - - - - - - - - - -
- - - - - - - - - -
- - - - - - - - - -
- - - - - - - - - -
- - - - - - - - - -
- - - - - - - - - -
- - - - - - - - - -
- - - - - - - - - -
LEVEL : OFF EXIT
- - - - - - - - - -
- - - - - - - - - -
- - - - - -
- - - - - -
- - - - - -
- - - - - - - - - -
- - - - - - - - - -
- - - - - - - - - -
LEVEL : 5 EXIT
(S)
(J)
SEARCH
English
Searching for recorded video
How to use 26
bMotion sensor settings verification using the
preview screen
1Turn the J-dial to move the cursor to PREVIEW,
and then turn the S-dial clockwise.
The image is displayed in the preview area.
☞If NOT FOUND is displayed, set the motion
sensors once again.
☞Each time the S-dial is turned clockwise, the
images detected by the motion sensor are
displayed on the preview screen.
2Press the SEARCH button to exit the search mode.
The normal live video display returns.
bFull-screen viewing of video detected by the
motion sensor
1Turn the J-dial to move the cursor to VIEW, and
then turn the S-dial clockwise.
Normal playback starts from the selected image. When
the video is over, playback pauses.
2Press the PLAY/STOP button.
EMotion detection search (continued)
SEARCH FROM : ALARM / CHANNEL : 4
START :
05-01-06 10:00
END :
05-01-06 20:00
MOTION SENSOR ->
PREVIEW ->
VIEW ->
MOVE:JOG SELECT:SHUTTLE
(S)
(J)
SEARCH
To search a recording from a different channel, stop
the current playback and then repeat the setting
process from the beginning.
SEARCH FROM : ALARM / CHANNEL : 4
START :
05-01-06 10:00
END :
05-01-06 20:00
MOTION SENSOR ->
PREVIEW ->
VIEW ->
MOVE:JOG SELECT:SHUTTLE
(S)
(J)
PLAY/STOP
English 27 How to use Copying recorded video to media Selected video stored in the normal recording area and the alarm recording area can be copied to various media (full screen). Images copied to a CompactFlash card can be directly printed on a printer. We recommend using this area to store video only for quick verification, not as a permanent storage. If complete archival is required, copy to media such as a CompactFlash card. Before copying, connect the CD-R/RW drive to the USB connector on the front or the rear panel. If the CD-R/RW drive connection is not confirmed the selections of the CD-R/RW under the COPY TO are not displayed. In order to print the recorded images, the media must be formatted on the DVR before use. A Copying video from the normal or alarm recording area to the archive area (P28) Verify the available recording space in the archive area before copying. If the available archive area is insufficient, copy the archive area to media such as a CompactFlash card, and erase the archive area. BCopying video from the internal hard disk to the CD-R/RW (P29) Archive area Alarm recording area Normal recording area Archive area Alarm recording areaNormal recording area C Copying video from the internal hard disk to media such as a CompactFlash card (P30) When video is being copied from the normal or the alarm recording area to media such as a CompactFlash card, the video is temporarily stored in the archive area, and then copied to the media. Always check for sufficient archive space before copying. When the copying is complete, the video will be deleted from the archive area. Copying video to a CompactFlash card takes about 15 seconds per 1MB. If the recording capacity becomes full during the copying operation, the message COMPACTFLASH FULL! appears and the copying operation finishes. Press any key to return to the normal screen. Repeat the copy procedure with a CompactFlash card that has sufficient recording space. Video copied to a CompactFlash card or CD-R/RW includes a tampering detection code. Contact the store where you purchased your device regarding the detection of tampering occurrences. Video copied to a CompactFlash card or CD-R/RW with audio attached can be played using the DVR Viewer 2. Refer to the separate Manual for Remote Operation using a Network Connection for more information. JPEG images are handled as field images. Viewing these images using an image processing software available on the market will result in viewing the vertical direction compressed to 50% so please make sure to use DVR Viewer 2. D Printing images directly from the CompactFlash card or the microdrive. (P31) Only FAT16 CompactFlash cards can be formatted on the DVR. The DVR will not recognize FAT32 cards. Archive area Alarm recording area Normal recording area
English
Copying recorded video to media
How to use 28
1Start playback from the normal or alarm recording
area.
2Press the STILL button at the image to be copied.
The image is paused.
3Press the COPY button.
The copy setting screen is displayed.
The cursor moves to the COPY TO field.
4Turn the S-dial clockwise.
ARCHIVE AREA starts blinking.
5Turn the J-dial to select COPY TO ARCHIVE
AREA, and then turn the S-dial twice clockwise.
The cursor moves to the 1 of the HOW MANY field.
Selections:
ARCHIVE AREA, COMPACT FLASH, CF→PRINT,
CD-R/RW
6Turn the J-dial to select HOW MANY 10, and then
turn the S-dial clockwise.
The PICTURES starts blinking.
Select a value between 1~99.
7Turn the J-dial to select SECONDS, and then turn
the S-dial clockwise.
The cursor moves to COPY START.
Selections:
PICTURES:
Copies the specified number of images.
SECONDS:
Copies the specified duration in seconds.
MINUTES:
Copies the specified duration in minutes.
8Select the channel to be copied (Example: 03, 05)
using the camera selection button.
The selected channel changes from grey to white.
The default channel is green. The channel in green
can not be modified.
☞Press the COPY button to cancel the current
copy operation.
9Turn the S-dial clockwise to start copying.
Copying to the archive area starts, and the COPY
TO ARCHIVE AREA ! message is displayed.
When copying is complete, the COPY FINISHED !
message is displayed.
ACopying video (example: 10 seconds) from the normal or alarm recording area to the
archive area
STILL
(S)
COPY
COPY TO : ARCHIVE AREA
HOW MANY : 1 PICTURES
COPY CH 01 02 03 04 05 06 07 08
09 10 11 12 13 14 15 16
SELECT COPY CHANNEL
COPY START ->
FORMAT/ERASE: COMPACT FLASH
FORMAT/ERASE START ->
COPY TO : ARCHIVE AREA
(S)
(J)
HOW MANY: 10 PICTURES
Even if a video with audio attached is copied to the
archive area only the images are copied.
HOW MANY : 10 SECONDS
COPY CH 01 02 03 04 05 06 07 08
09 10 11 12 13 14 15 16
SELECT COPY CHANNEL
COPY START ->
(S)
COPY TO ARCHIVE AREA ! < 55% > COPY FINISHED ! < 100% >
English
Copying recorded video to media
29 How to use
1Connect the optional CD-R/RW drive to the USB
connector on the front or rear panel of the DVR.
If the front and the rear USB terminal are connected
simultaneously the front is given priority.
2Start playback from the normal, alarm or the
archive area.
3Press the STILL button at the image to be copied.
The image is paused.
4Press the COPY button.
The copy setting screen is displayed.
The cursor moves to the COPY TO field.
5Turn the S-dial clockwise.
ARCHIVE AREA starts blinking.
6Turn the J-dial to select COPY TO CD-R/RW, and
then turn the S-dial twice clockwise.
The cursor moves to the 1 of the HOW MANY field.
Selections:
ARCHIVE AREA, COMPACT FLASH, CF→PRINT,
CD-R/RW
7Turn the J-dial to select HOW MANY 10, and then
turn the S-dial clockwise.
The PICTURES starts blinking.
Select a value between 1~99, >99.
8Turn the J-dial to select SECONDS, and then turn
the S-dial clockwise.
The cursor moves to COPY START.
Selections:
PICTURES, SECONDS, MINUTES, EVENTS
EVENTS allows you to copy the data of the
archive area per event. Selecting >99 fills the
capacity regardless of the event.
9Select the channel to be copied (Example: 03, 05)
using the camera selection button.
The selected channel changes from grey to white.
The default channel is green. The channel in green
can not be modified.
☞Press the COPY button to cancel the current
copy operation.
ÀTurning the S-dial clockwise displays the CD-R/RW
writing confirm screen.
The cursor moves to FINALIZE.
ÁTurn the S-dial clockwise, select the FINALIZE
settings using the J-dial and turn the S-dial
clockwise.
ON: Finalizes the disc. Once the disc is finalized the
disc is not recordable.
OFF: The disc is not finalized. The disc recording can
be interrupted.
The cursor moves to VERIFY.
ÂTurn the S-dial clockwise, select the VERIFY setting
using the J-dial and turn the S-dial clockwise.
ON: The writing status is verified once the disc writing
is complete.
OFF: The disc writing status is not verified once the
disc writing is complete.
The cursor moves to START→.
ÃTurn the S-dial clockwise.
Copying to CD-R/RW starts and the following
messages are displayed during the copying operation.
↓COPY TO CD-R/RW ! → →
↓(If FINALIZE is set to OFF)
CLOSING CD-R/RW ! PLEASE WAIT
↓(If FINALIZE is set to ON)
FINALIZING CD-R/RW ! PLEASE WAIT
↓COPY FINISHED ! < 100% >
BCopying video (example: 10 pictures) from the internal hard disk to the CD-R/RW drive
STILL
(S)
COPY
COPY TO : ARCHIVE AREA
HOW MANY : 1 PICTURES
COPY CH 01 02 03 04 05 06 07 08
09 10 11 12 13 14 15 16
SELECT COPY CHANNEL
COPY START ->
(S)
(J)
COPY TO : CD-R/RW
HOW MANY : 1 PICTURES
HOW MANY : 10 SECONDS
COPY CH 01 02 03 04 05 06 07 08
09 10 11 12 13 14 15 16
SELECT COPY CHANNEL
COPY START ->
If a new disk (CD-RW) or an erasable disc is used for
the copying, format the disc before use.
COPY TO CD-R/RW
HOW MANY 1 PICTURES
FINALIZE : ON
VERIFY : OFF
START ->