Sanyo Dsr 3716 P Manual
Have a look at the manual Sanyo Dsr 3716 P Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 550 Sanyo manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
English
Recording settings
How to set 50
This menu is used to set the desired cameras for each
group (P-1, P-2, P-3 and P-4) for programmed recording.
For each group, cameras are selected to enable or
disable recording from them, and their individual
recording rates are also set here.
After this setting is completed, the program number
(P-1~P-4) can be selected for REC PROGRAM GROUP
on the screen.
1PROGRAM number
Selects the program number.
Selections: P-1, P-2, P-3, P-4
2SELECT INDIVIDUAL CAMERA RATE (FPS)
Enables or disables cameras for recording, and sets their
individual recording rates. The default setting for recording
rate is 0.5.
Selections: 25/12.5/6.25/3.125/1.533/1/0.5/0.33/0.25/0.2/
0.1/0.05/0.033FPS/OFF
3NORMAL REC
Displays the possible recording time for each group, based
on the program settings.
1Display the screen as
explained in Displaying the recording settings
screen, and then turn the S-dial clockwise. (P39)
The P-1 starts blinking.
2Turn the J-dial to select the desired PROGRAM
number (example: P-2), and then turn the S-dial
twice clockwise.
The 0.5 indicator starts blinking.
3Turn the J-dial to select the rate for 01 (example:
6.25), and then turn the S-dial clockwise.
4Turn the J-dial, select 02, and turn the S-dial
clockwise.
5Turn the J-dial to select the rate (example: 12.5),
and then turn the S-dial clockwise.
Repeat the same procedure to select the desired
recording rates.
The possible recording time of the normal recording
area is displayed, and the cursor moves to the program
number.
6Turn the J-dial to select other programs (P-2~P-4)
and enable or disable recording from the individual
cameras, and set their recording rates.
7Press the EXIT/OSD button to end the setting
procedure.
EProgrammed recording menu
description
The recording rate is limited by the pre-alarm and
mirroring settings. (P88)
PROGRAM : P-4
SELECT INDIVIDUAL CAMERA RATE(FPS)
01: 0.5 02: 0.5 03: 0.5 04: 0.5
05: 0.5 06: 0.5 07: 0.5 08: 0.5
09: 0.5 10: 0.5 11: 0.5 12: 0.5
13: 0.5 14: 0.5 15: 0.5 16: 0.5
NORMAL REC : 67H
PROGRAM : P-3
SELECT INDIVIDUAL CAMERA RATE(FPS)
01: 0.5 02: 0.5 03: 0.5 04: 0.5
05: 0.5 06: 0.5 07: 0.5 08: 0.5
09: 0.5 10: 0.5 11: 0.5 12: 0.5
13: 0.5 14: 0.5 15: 0.5 16: 0.5
NORMAL REC : 67H
PROGRAM : P-2
SELECT INDIVIDUAL CAMERA RATE(FPS)
01: 0.5 02: 0.5 03: 0.5 04: 0.5
05: 0.5 06: 0.5 07: 0.5 08: 0.5
09: 0.5 10: 0.5 11: 0.5 12: 0.5
13: 0.5 14: 0.5 15: 0.5 16: 0.5
NORMAL REC : 67H
PROGRAM : P-1
SELECT INDIVIDUAL CAMERA RATE(FPS)
01: 0.5 02: 0.5 03: 0.5 04: 0.5
05: 0.5 06: 0.5 07: 0.5 08: 0.5
09: 0.5 10: 0.5 11: 0.5 12: 0.5
13: 0.5 14: 0.5 15: 0.5 16: 0.5
NORMAL REC : 67H1
2
3
E-1Programmed recording settings
MENU
(J)(S)
PROGRAM : P-1
SELECT INDIVIDUAL CAMERA RATE(FPS)
01: 0.5 02: 0.5 03: 0.5 04: 0.5
05: 0.5 06: 0.5 07: 0.5 08: 0.5
09: 0.5 10: 0.5 11: 0.5 12: 0.5
13: 0.5 14: 0.5 15: 0.5 16: 0.5
NORMAL REC : 67H
5.PROGRAM REC SET
2.RECORD SET
01: 0.5
01: 6.25 02:12.5 03: 0.5 04: 0.5
EXIT/OSD
English
Recording settings
51 How to set
This menu is used to set the start and end times for timer-controlled recording.
The following timer functions are available:
Day of the week timer-controlled recording (same
time and same recording rate every week for the
specified day) (P52)
Sets the timer-controlled recording for the specific day of
the week, selected from Sunday to Saturday.
Overlapping timer-controlled recording (P53)
Repeats the same timer-controlled recording every day.
External timer-controlled (alarm) recording (P54)
Records video when a signal is detected at the external
timer terminal.
1WEEK
This column is used to select the day of the week for
timer-controlled recording. When the name of the day starts
blinking, it can be modified to a different day of the week.
The SAT and DLY settings, as shown at 7, are used when timer
setting is required for a period longer than 24 hours.
Selections: SUN/MON/TUE/WED/THU/FRI/SAT/DLY
2START
This column is used to enter the start time of timer-controlled
recording (24 hours time format).
3STOP
This column is used to enter the stop time of timer-controlled
recording (24 hours time format).
If the time period between the start and end time includes
12:00am (midnight), then the letter T will be displayed to the left
of the end time setting.
4PROGRAM
This column is used to set the program number (P-1~P-4) for
programmed recording. (P50)
Selections: OFF/P-1/P-2/P-3/P-4
5FPS (recording rate)
This column is used to modify the recording rate for the
timer-controlled recording.
When using programmed recording, the recording rate will be
pre-selected automatically. The FPS column will not take input
(****).
6SET (ON/OFF)
This column is used to turn the timer ON or OFF.
7SAT/DLY
These rows are used to set timer-controlled operation for a period
longer than 24 hours.
8EXT (external)
This row is used to set recording controlled by an external signal
connected to the EXT TIMER IN terminal on the rear panel.
When the signal is detected (min. pulse width 1 sec), the
recording of live video will start to the normal recording area.
bTimer-controlled recording
The settings for picture quality and audio recording will
take their values from the settings performed under
. (P49)
If audio recording is performed, select the recording rate to
1 FPS or higher.
bIf the timer settings are overlapping
The priority order of recording is Day of the week reservation
→ Daily reservation → External input.
bIf the Day of the week and Daily settings are
overlapping
Recording setting with the earlier start time will take priority. If
the start time is the same, the one that is higher in the menu
settings will take priority.
bCancelling timer-controlled operations
Press the MENU RESET button on the front panel while the
timer setting menu is displayed.
FTimer setting menu description
WEEK START STOP PROGRAM FPS SET
SUN --:-- --:-- OFF 12.5 FPS OFF
MON --:-- --:-- OFF 12.5 FPS OFF
TUE --:-- --:-- OFF 12.5 FPS OFF
WED --:-- --:-- OFF 12.5 FPS OFF
THU --:-- --:-- OFF 12.5 FPS OFF
FRI --:-- --:-- OFF 12.5 FPS OFF
SAT --:-- --:-- OFF 12.5 FPS OFF
DLY --:-- --:-- OFF 12.5 FPS OFF
EXT ***** ***** OFF 12.5 FPS OFF
1
7
823 4 5 6
F-1
F-2
F-3
English
Recording settings
How to set 52
1Display the screen as explained in
Displaying the recording settings screen, and
then turn the S-dial clockwise. (P39)
The SUN field starts blinking.
2Set the timer-controlled recording.
Example:
WEEK: Set daily (DLY).
START: Set 8:30am.
STOP: Set 6:30pm.
FPS: Set 1 FPS.
SET: Set to ON.
1Turn the J-dial, change SUN to DLY, and turn
the S-dial clockwise.
The hour indicator – – under START starts
blinking.
2Turn the J-dial, set 08, and turn the S-dial
clockwise.
The minutes indicator – – under START starts
blinking.
3Turn the J-dial, set 30, and turn the S-dial
clockwise.
The hour indicator – – under STOP starts blinking.
Repeat the same procedure to perform the
remaining settings in the example.
4Turn the J-dial, select ON under SET, and turn
the S-dial clockwise.
The cursor moves to the MON line.
3Press the EXIT/OSD button.
4Press the TIMER button.
The TIMER indicator turns on, and the timer-controlled
recording goes into standby mode.
When the start time set for timer-controlled
recording comes
The REC/STOP indicator turns on, REC appears
in the operation display, and recording starts.
When the stop time set for timer-controlled
recording comes
The REC/STOP indicator turns off, the recording
stops.
Stopping a timer-controlled recording in
progress
Press the TIMER button. The recording stops, the
TIMER indicator turns off.
Playback during timer-controlled recording (P18)
bSetting a program for timer-controlled recording
Perform the following settings to set a program after setting
the timer-controlled recording.
Example:
1Turn the J-dial to select the desired PROGRAM
(P-1), and then turn the S-dial clockwise.
Since the program settings already include the
recording rate, the FPS setting will show ****.
Selections: P-1, P-2, P-3, P-4
2Turn the J-dial, select ON under SET, and turn the
S-dial clockwise.
3Press the EXIT/OSD button.
F-1Day of the week timer-controlled recording (same time, same recording rate every
week for the specified day)
MENU
(J)(S)
WEEK START STOP PROGRAM FPS SET
SUN --:-- --:-- OFF 12.5 FPS OFF
MON --:-- --:-- OFF 12.5 FPS OFF
6.TIMER SET
2.RECORD SET
DLY 08:30 18:30 OFF 1 FPS ON
WEEK START STOP PROGRAM FPS SET
DLY 08:30 18:30 OFF 1 FPS ON
MON --:-- --:-- OFF 1 FPS OFF
TUE --:-- --:-- OFF 1 FPS OFF
EXIT/OSD
TIMER
01-01-06 00:00:00 REC REPEAT EN A ARCHIV 0001REC/STOP
DLY 08:30 18:30 P-1 **** FPS ON
EXIT/OSD
English Recording settings 53 How to set 1Display the screen as explained in Displaying the recording settings screen. (P39) 2Set the timer-controlled recording. Example: WEEK (start): Set MON. WEEK (stop): Set WED. START: Set 10:30am. STOP: Set 8:30pm. PROGRAM: Do not set. FPS: Set 5 FPS. SET: Set ON. 1Turn the J-dial, change SAT to MON, and turn the S-dial clockwise. The hour indicator – – under START starts blinking. 2Turn the J-dial, select 10, and turn the S-dial clockwise. The minutes indicator – – under START starts blinking. 3Turn the J-dial, select 30, and turn the S-dial clockwise. The hour indicator – – under STOP starts blinking. 4Turn the J-dial, select **, and turn the S-dial clockwise. All fields after STOP will display **, and will not take any input. The DLY line automatically switches to TUE. 5Turn the J-dial, select WED, and turn the S-dial clockwise. The hour indicator – – under STOP starts blinking. 6Turn the J-dial, select 20, and turn the S-dial clockwise. Repeat the same procedure to perform the remaining settings in the example. 3Press the EXIT/OSD button. 4Press the TIMER button. The TIMER indicator turns on, and the timer-controlled recording goes into standby mode. When the start time set for timer-controlled recording comes The REC/STOP indicator turns on, REC appears in the operation display, and recording starts. When the stop time set for timer-controlled recording comes The REC/STOP indicator turns off, the recording stops. Stopping a timer-controlled recording in progress Press the TIMER button. The recording stops, the TIMER indicator turns off. Playback during timer-controlled recording (P18) bSetting a program for timer-controlled recording Perform the following settings to set a program after setting the timer-controlled recording. Example: 1Turn the J-dial to select the desired PROGRAM (P-1), and then turn the S-dial clockwise. Since the program settings already include the recording rate, the FPS setting will show ****. Selections: P-1, P-2, P-3, P-4 2Turn the J-dial, select ON under SET, and turn the S-dial clockwise. 3Press the EXIT/OSD button. F-2Overlapping timer-controlled recording MENU (J)(S) WEEK START STOP PROGRAM FPS SET SUN --:-- --:-- OFF 12.5 FPS OFF MON --:-- --:-- OFF 12.5 FPS OFF TUE --:-- --:-- OFF 12.5 FPS OFF WED --:-- --:-- OFF 12.5 FPS OFF THU --:-- --:-- OFF 12.5 FPS OFF FRI --:-- --:-- OFF 12.5 FPS OFF SAT --:-- --:-- OFF 12.5 FPS OFF DLY --:-- --:-- OFF 12.5 FPS OFF EXT ***** ***** OFF 12.5 FPS OFF 6.TIMER SET 2.RECORD SET MON 10:30 **:** *** ****FPS *** WED **:** 20:30 OFF 5FPS ON EXIT/OSD TIMER 01-01-06 00:00:00 REC REPEAT EN A ARCHIV 0001REC/STOP TUE **:** 20:30 P-1 ****FPS ON EXIT/OSD
English Recording settings How to set 54 1Connect an external timer device to the EXT TIMER IN terminal on the rear panel (Figure 1). 2Display the screen using Displaying the general settings screen. (P39) 3Set the timer-controlled recording. Example: PROGRAM: Do not set (OFF). FPS: Set 5 FPS. SET: Set ON. 1Turn the J-dial to select EXT, and then turn the S-dial twice clockwise. The 12.5 under FPS starts blinking. 2Turn the J-dial, select 5, and turn the S-dial clockwise. The OFF indicator under SET starts blinking. 3Turn the J-dial, select ON, and turn the S-dial clockwise. 4Press the EXIT/OSD button. 5Press the TIMER button. The TIMER indicator turns on, and the timer-controlled recording goes into standby mode. Stopping a timer-controlled recording in progress Press the TIMER button. The recording stops, the TIMER indicator turns off. Playback during timer-controlled recording (P18) bSetting a program for timer-controlled recording Perform the following settings to set a program after setting the timer-controlled recording. Example: 1Turn the J-dial to select the desired PROGRAM (P-1), and then turn the S-dial clockwise. Since the program settings already include the recording rate, the FPS setting will show ****. Selections: P-1, P-2, P-3, P-4 2Turn the J-dial, select ON under SET, and turn the S-dial clockwise. 3Press the EXIT/OSD button. F-3External timer-controlled recording MENU (J)(S) WEEK START STOP PROGRAM FPS SET SUN --:-- --:-- OFF 12.5 FPS OFF MON --:-- --:-- OFF 12.5 FPS OFF TUE --:-- --:-- OFF 12.5 FPS OFF WED --:-- --:-- OFF 12.5 FPS OFF THU --:-- --:-- OFF 12.5 FPS OFF FRI --:-- --:-- OFF 12.5 FPS OFF SAT --:-- --:-- OFF 12.5 FPS OFF DLY --:-- --:-- OFF 12.5 FPS OFF EXT ***** ***** OFF 12.5 FPS OFF 6.TIMER SET 2.RECORD SET EXT ***** ***** OFF 5 FPS ON EXIT/OSD TIMER EXT ***** ***** P-1 **** FPS ON EXIT/OSD Figure 1
English
Recording settings
55 How to set
The following settings can be performed under the alarm recording settings.
Alarm recording (P56)
These settings control the picture quality, audio recording
and recording rate for the alarm recording area, when an
alarm is detected.
Pre-alarm recording (P57)
These settings control the recording rate and the
duration for pre-alarm recording.
Alarm trigger (P57)
Selects the alarm detection method.
Motion sensor (P58)
1ALARM RECORDING
Turns alarm recording ON or OFF, and whether alarm recording
should be performed during timer-controlled recording.
When OFF is selected, the settings up to PRE-ALARM
RECORDING are disabled.
Selections:
OFF: Alarm recording is not performed.
ENABLED:
Alarm recording is performed, regardless of timer-controlled
settings.
AL-REC ON TIMER:
Alarm recording is performed only during timer-controlled
recording.
AL-REC OFF TIMER:
Alarm recording is performed only when timer-controlled
recording is not.
OLY AL-RC ON TMR:
Alarm recording is performed only during the period specified
by the timer setting. If this setting is selected, timer-controlled
recording, and the TIMER button will be disabled.
2PICTURE QUALITY
Select the picture quality of the recordings.
Selections:
BASIC/NORMAL/ENHANCED/FINE/SUPER FINE
3AUDIO RECORDING
Audio recording can be switched ON or OFF.
Audio recording can only be set if the recording rate is in the
range of 25~1 FPS. When audio recording is selected, an A is
displayed in front of the recording rate. Since both audio and
video will be stored in the alarm recording area, the recording
capacity of this area will decrease.
If the recording rate is out of this range, audio recording will not be
performed; even if audio recording was set.
4ALARM INTERLEAVE (recording pattern)
Selections:
ONLY: Records only the live video where the alarm occurred.
SW: Alternately records the live video from the camera where
the alarm occurred and the live video from all connected
cameras.
5REC RATE
The following settings can be selected:
Selections:
25, 16.67, 12.5, 8.333 ,6.25, 5, 4.167, 3.571, 3.125, 2.778, 2.5,
2.273, 1.923, 1.667, 1.471, 1.316, 1.19, 1.087, 1, 0.5, 0.333, 0.25,
0.2, 0.1, 0.05, 0.033
Audio recording can only be set when this setting is within the
range of 25~1 FPS.
6DURATION
Selects the recording duration for a single alarm event from the
following selections:
5SEC/10/20/40/1MIN/2/3/4/5/10/15/CC
CC: Recording is performed as long as the alarm is present
(minimum 5 sec).
7PRE-ALARM RECORDING
OFF: Pre-alarm recording is not performed.
ON: Pre-alarm recording is performed.
8REC RATE
Refer to the pre-alarm recording time under recording rate
settings. (P88)
9DURATION
Refer to pre-alarm recording time. (P88)
FALARMS CAN BE RECORDED (number of alarms that
can be recorded)
GALARM TRIGGER
Selects the alarm detection method from the followings:
Selections:
ALARM:
Performs alarm recording when an external alarm is detected.
SENSOR:
Performs alarm recording when a motion sensor detects
movement. (P58)
ALARM AND SENSOR:
Performs alarm recording when an external alarm and a
motion sensor alarm are detected simultaneously.
ALARM OR SENSOR:
Performs alarm recording when either an external alarm or a
motion sensor alarm is detected.
HMOTION SENSOR
Displays the motion sensor setting screen.
GAlarm recording settings menu description
ALARM RECORDING : OFF
PICTURE QUALITY : ENHANCED
AUDIO RECORDING : OFF
ALARM INTERLEAVE : ONLY
REC RATE: 12.5FPS, DURATION: 20SEC
PRE-ALARM RECORDING : ***
REC RATE: **** FPS, DURATION: ****
=> (01731 ALARMS CAN BE RECORDED)
ALARM TRIGGER : ALARM
MOTION SENSOR ->1
3
5
8
G2
6
9 4
7
F
H
G-1
G-2
G-3
G-1G-4
English
Recording settings
How to set 56
1Display the screen as
explained in Displaying the recording settings
screen, and then turn the S-dial clockwise. (P39)
The OFF field of ALARM RECORDING starts
blinking.
2Set the alarm recording.
1Turn the J-dial to select ALARM RECORDING
selection, and then turn the S-dial twice
clockwise.
Selections:
OFF/ENABLED/AL-REC ON TIMER/AL-REC OFF
TIMER/OLY AL-RC ON TMR
2Turn the J-dial to select the desired PICTURE
QUALITY, and then turn the S-dial twice
clockwise.
After the arrow symbol (=>) the number of alarms
that can be recorded is displayed.
Selections:
BASIC/NORMAL/ENHANCED/FINE/SUPER FINE
Example:
3Turn the J-dial to switch AUDIO RECORDING
ON, and then turn the S-dial twice clockwise.
The letter A is displayed in front of the recording
rate, and the number of alarms that can be recorded
is displayed after the => symbol.
Example:
4Turn the J-dial to select the recording pattern
(ALARM INTERLEAVE), and then turn the S-dial
twice clockwise.
Selections: ONLY/SW
☞If ONLY is selected (Figure 1):
Live video will be recorded only from the camera
where the alarm was detected, until the alarm is
cancelled.
☞If SW is selected (Figure 2):
Live video will be recorded alternately from the
camera where the alarm occurred and from all
connected cameras.
5Turn the J-dial to select the REC RATE (example:
5), and then turn the S-dial clockwise.
Repeat the same procedure to set the DURATION.
3Press the EXIT/OSD button.
The normal screen is displayed again.
The letter ALARM and the number of alarm
recordings are displayed in the operation display.
When an alarm is detected, the ALARM field starts
blinking.
☞If consecutive alarms are detected on the same
channel, depending on the alarm retrigger setting,
they may be counted as one alarm. (P60)
G-1Alarm recording settings
MENU
(J)(S)
ALARM RECORDING : OFF
PICTURE QUALITY : ENHANCED
AUDIO RECORDING : OFF
ALARM INTERLEAVE : ONLY
REC RATE: 12.5FPS, DURATION: 20SEC
PRE-ALARM RECORDING : ***
REC RATE: **** FPS, DURATION: ****
=> (01731 ALARMS CAN BE RECORDED)
ALARM TRIGGER : ALARM
MOTION SENSOR ->
7.ALARM REC MODE SET
2.RECORD SET
=> (01387 ALARMS CAN BE RECORDED)
REC RATE: A 12.5FPS, DURATION: 20SEC
=> (01431 ALARMS CAN BE RECORDED)
11111111111111111111
Alarm detectedAlarm cancelled
Records the channel where the alarm was input until the
alarm is turned off
12131415161213141516
Alarm detectedAlarm cancelled
Records the channel where the alarm
was input and the other channels
alternately until the alarm is turned off Alarm channel
Normal recording
02
EXIT/OSD
01-01-06 00:00:00 REC REPEAT EN A ALARM 0000
Alarm total
Alarm indicator
English
Recording settings
57 How to set
1Display the screen as
explained in Displaying the recording settings
screen, and then turn the S-dial clockwise. (P39)
The OFF field of ALARM RECORDING starts
blinking.
2Set the pre-alarm recording.
1Turn the J-dial to select ENABLED for ALARM
RECORDING, and then turn the S-dial clockwise.
The *** field of the PRE-ALARM RECORDING
switches to OFF.
2Turn the J-dial to select PRE-ALARM
RECORDING, and then turn the S-dial
clockwise.
The OFF indicator of PRE-ALARM RECORDING
starts blinking.
3Turn the J-dial, turn ON the PRE-ALARM
RECORDING, and then turn the S-dial clockwise.
The **** displayed at the REC RATE and
DURATION fields changes to numbers, and a
message is displayed, with NO
blinking.
4Turn the J-dial, select YES, and turn the S-dial
clockwise.
The cursor moves to REC RATE.
5Turn the S-dial clockwise.
6Turn the J-dial to select the REC RATE (example:
8.333), and then turn the S-dial clockwise.
Repeat the same procedure to set the DURATION
(example: 20).
After the arrow symbol (=>) the number of alarms
that can be recorded is displayed.
3Press the EXIT/OSD button.
PRE appears in the operation display area.
When an alarm is detected, the ALARM field starts
blinking.
1Turn the J-dial to the select ALARM TRIGGER
selections and turn the S-dial clockwise.
The ALARM starts blinking.
Selections:
ALARM/SENSOR/ALARM AND SENSOR/ALARM OR
SENSOR
2Turn the J-dial, select ALARM TRIGGER. Then turn
the S-dial clockwise, and select ALARM.
The cursor moves back to the ALARM RECORDING
field.
3Press the EXIT/OSD button.
bInput signals used as external alarms
The signals that can be used as alarms are of two types:
signals detected at the ALARM IN terminal switches, and
alarm signals superimposed on the coaxial signals coming
from cameras.
G-2Pre-alarm recording settings
MENU
(J)(S)
ALARM RECORDING : OFF
PICTURE QUALITY : ENHANCED
AUDIO RECORDING : OFF
ALARM INTERLEAVE : ONLY
REC RATE: 12.5FPS, DURATION: 20SEC
PRE-ALARM RECORDING : OFF
REC RATE: **** FPS, DURATION: ****
=> (01731 ALARMS CAN BE RECORDED)
ALARM TRIGGER : ALARM
MOTION SENSOR ->
7.ALARM REC MODE SET
2.RECORD SET
PRE-ALARM RECORDING : OFF
REC RATE: A 12.5FPS, DURATION: 1MIN
REC RATE SETTING IN THE MENU WILL BE
AUTOMATICALLY ADJUSTED.
ARE YOU SURE ?
NO
G-3Alarm trigger setting
REC RATE: A 8.333FPS, DURATION: 20SEC
=> (00694 ALARMS CAN BE RECORDED)
02
01-01-06 00:00:00 REC REPEAT EN A PRE 0000
EXIT/OSDAlarm total
PRE indicator
ALARM TRIGGER : ALARM
EXIT/OSD
English
Recording settings
How to set 58
Use this screen for motion sensor setting on a live video
screen to detect moving objects such as intruders, and
generate alarms.
The motion sensor detects movement based on
intensity-changes on the screen. It is necessary to use
sensor settings that are appropriate for both the location
of the sensor and for the observed objects.
1Cursor
The default location of the cursor is the upper left corner.
Use the J-dial to move it horizontally.
2Sensor setting range
The motion sensor can be set within this screen area.
3Motion sensor
The type of sensor can be selected according to the
detection location. Use the J-dial to change the type of the
sensor.
–: Sensor turned off
A: Sensor A is used for detection
B: Sensor B is used for detection
4Camera number display (CH01)
Selects the camera number for the motion sensor.
Use the camera selection buttons to change the camera
number.
Selections: CH01/CH02 ... CH15/CH16
5Time period (T-1)
The time period settings for four periods of the day (for
example: T-1 Early morning, T-2 Morning, T-3 Daytime
and T-4 Evening) allow for using different surveillance
methods, such as masking early morning, and automatic
sequence daytime. This DVR has two timers (A and B) for
setting time periods in two blocks, and separate sensors
can be set up for each period.
Refer to the section about setting the time periods. (P37)
Selections: T- 1 / T- 2 / T- 3 / T- 4
6LEVEL
Sets the sensitivity of the motion sensor.
OFF: Sensitivity is not set.
1 (High sensitivity) ~ 10:
Selects the sensitivity as a numeric value.
☞Motion sensor sensitivity check
When the sensor detects movement, the green ( ) symbol
changes to red, and a buzzer (beeper) goes off.
If the sensitivity is set high, a slight change in the lighting
may trigger the sensor. Set the sensitivity appropriate for
the setting location.
☞Stopping the motion sensor recording
Display the screen while
recording is in progress, and turn the S-dial clockwise. The
motion sensor screen appears. Press the camera
selection button of the current camera, and set LEVEL
OFF.
7MODE
Sets the detection method of the motion sensor.
Selections:
A: Detects moving objects at the location of sensor A.
B: Detects moving objects at the location of sensor B.
A AND B:
Detects simultaneous movement of objects at location
A and B.
A AND NB:
Detects moving objects at location A when there is no
movement at the same time at location B. If sensor A is
set to a moving object, and sensor B is set to a
non-moving object, then changes occurring at both
places, such as changes in lighting will not be detected.
Only moving objects at location A will be detected.
A TO B:
Detects objects moving from location A to location B
(time from A to B is within 2 seconds).
B TO A:
Detects objects moving from location B to location A
(time from B to A is within 2 seconds).
C:Detects when the intensity on the entire screen
becomes even (for example vandals spray-painting the
camera). There is no need to set a location for the
sensor.
G-4Motion sensor screen description
CH01 T-1 LEVEL : OFF MODE : A
1
2
3
45 6 7
TIME PERIOD T-1 T-2 T-3 T-4
TIME PERIOD A 00:00 00:00 00:00 00:00
TIME PERIOD B 00:00 00:00 00:00 00:00
SELECT TIME PERIOD
SEQUENCE TIME PERIOD A
MASK TIME PERIOD A
MOTION SENSOR TIME PERIOD A
English Recording settings 59 How to set 1Set TIME PERIOD A and TIME PERIOD B using (P37). 2Display the screen as explained in Displaying the recording settings screen, and then turn the S-dial clockwise. (P39) The OFF field of ALARM RECORDING starts blinking. 3Display the motion sensor screen 1Turn the J-dial to select ENABLED for ALARM RECORDING, and then turn the S-dial clockwise. 2Turn the J-dial, select ALARM TRIGGER, and turn the S-dial clockwise. Selections: ALARM/SENSOR/ALARM AND SENSOR/ALARM OR SENSOR 3Turn the J-dial to select SENSOR, and then turn the S-dial twice clockwise. The motion sensor screen is displayed. 4Set the SENSOR. Example: Camera number selection: Channel 3 (CH03) Time period A: T-1 LEVEL: 2 MODE (detection method): A AND B 1Press camera selection button 3. The channel display changes to CH03. 2Turn the J-dial to move the cursor to the desired sensor location, and then turn the S-dial clockwise. 3Turn the J-dial, set the sensor to A, and turn the S-dial clockwise. When A is accepted, the cursor moves to the right, to the next position. Repeat the procedure to move the cursor, and set the sensor for A and B. 4Turn the J-dial to move the cursor to the time period selection T-1, and then turn the S-dial clockwise. The T-1 indicator starts blinking. 5Turn the J-dial to select T-2, and then turn the S-dial twice clockwise. The OFF indicator of LEVEL starts blinking. 6Turn the J-dial to select LEVEL to 2, and then turn the S-dial twice clockwise. The A field of MODE starts blinking. 7Turn the J-dial, select the A AND B for MODE, and then turn the S-dial clockwise. When detection method is accepted, the cursor moves to the upper left position. 5Repeat the same procedure to set both time periods (TIME PERIOD A/B), select the camera channels and set the sensors (A/B). 6To exit, turn the S-dial counterclockwise. Operation returns to the screen. G-5Motion sensor setting MENU (J)(S) ALARM RECORDING : OFF PICTURE QUALITY : ENHANCED AUDIO RECORDING : ON ALARM INTERLEAVE : ONLY 7.ALARM REC MODE SET 2.RECORD SET 3CH01 CH03 The LEVEL and MODE settings can be different for the time periods (T-1, T-2, T-3 and T-4) of TIME PERIOD A, but the location of the motion sensor is fixed. The motion sensor cannot be set to different locations for the different time periods. AB CH03 T-2 LEVEL : 2 MODE : A AND B A A A A AA A A A AA A A A AA A A A A B B B BB B B BB B B BB B B B 14 6 7 (S)