Sharp AR 5520N User Manual

59
USER SETTINGS
5
System Status window
To display the System Status window, click System Status on the Status tab.
The System Status window shows the network status of the machine.
Host Name
Display the host name of the machine.
IP Address
Display the IP address of the machine.
Subnet Mask
Display the subnet mask of the machine.
Default Gateway
Display the default gateway of the machine.
DHCP/BOOTP Server
Display the IP address of a DHCP/BOOTP server 
when an IP address of the machine is assigned by...

60
USER SETTINGS
CONFIGURING THE NETWORK SETTINGS (Network 
Settings TAB)
You can configure the network settings of the machine from the Network Settings tab of the Web page. The 
Network Settings tab displays the Network Settings window, SNMP Configuration window, Filter Configuration 
window and Port Configuration window. Enter or select the desired settings and click the Submit button to 
confirm the settings.
Network Settings window
To display the Network Settings window, click Network Settings on...

61
USER SETTINGS
5
Host Name
Configure the host name on the machine. The 
name set here is used with WINS and SC-Scan A, 
etc. The name must be different from those of 
other device.
DHCP/BOOTP
The function to get IP address from the 
DHCP/BOOTP server when the machine is turned 
on.
To get the IP address of the machine from the 
DHCP/BOOTP server, the DHCP/BOOTP server 
with the appropriate configuration must be running 
in the subnetwork. When the setting is 
DHCP+BOOTP, the machine detects DHCP and...

62
USER SETTINGS
SNMP Configuration window
To display the SNMP Configuration window, click SNMP Configuration on the Network Settings tab.
You can manage the machine via SNMP.
Authentic Community
Specify the authentication community name of 
SNMP. This community name is authenticated 
when an SNMP set request is received.
SysContact
Specify the SysContact of the MIB-II object. The 
e-mail address of the network administrator is 
usually specified.SysName
Specify the SysName of the MIB-II object. The...

63
USER SETTINGS
5
Filter Configuration window
To display the Filter Configuration window, click Filter Configuration on the Network Settings tab.
IP address filtering, IPv6 address filtering and MAC address filtering are available. Note that no filter is active by the 
factory defaults.
5
1
2
6
3
4
7
8
Downloaded From ManualsPrinter.com Manuals 

64
USER SETTINGS
Filter Mode
Enable/disable a filter configuration.
IP Filter Mode
Configure the IP filter operations. Available options 
are ALLOW and DENY. If you select ALLOW, 
only the data from the configured IP address range 
can be accepted. If you select DENY, the data 
from the configured IP address range cannot be 
received.
Start IP Address (Filter address1-4)
Configure the start address of the IP filter. The 
value must be configured in the format of a 
four-part series of numbers separated...

65
USER SETTINGS
5
Port Configuration window
To display the Port Configuration window, click Port Configuration on the Network Settings tab.
Port filtering function is also available.
HTTP
Enable/disable an HTTP port.
RAW Print
Enable/disable a 9100 port.
LPD
Enable/disable an LPD port.
IPP
Enable/disable an IPP port.
SNMPD
Enable/disable an SNMP port.Te l n e t
Enable/disable a TELNET port.
JCP
Enable/disable a JCP port.
SXUPTP
Enable/disable an SXUPTP port.
2
3
4
5
6
7
1
8
1
2
3
4
5
 JCP is a...

66
USER SETTINGS
MANAGING THE SYSTEM INFORMATION (System 
Information TAB)
From the System Information tab of the Web page, you can view the system information of the machine, set the 
administrative password, reset the network settings of the machine to the factory defaults and reboot the network 
settings of the machine. System Information tab displays the System Information window, Password window 
and Reset window.
System Information window
To display the System Information window, click System...

67
USER SETTINGS
5
Password window
To display the Password window, click Password on the System Information tab.
New Password
Configure the administrative password in ASCII 
characters (up to 7 characters). This is used as the 
authentication password for configuration changes 
via the Web page.Re-enter New Password
Re-enter the new password.
Setting an administrative password prevents unauthorised users from changing the network settings of the machine. 
If you forget the password, you need to manually...

68
USER SETTINGS
Reset window
To display the Reset window, click Reset on the System Information tab.
You can reboot the network settings of the machine and reset the network settings of the machine to the factory 
defaults via a network.
Reboot
Reboot the network settings of the machine by 
clicking the Start button.Reset to Factory Default
Reset the network settings of the machine to the 
factory defaults by clicking the Start button.
2
1
12
Downloaded From ManualsPrinter.com Manuals