Home > Siemens > Communications System > Siemens SD-192/SD-192MX AND SD-232 Programming Manual

Siemens SD-192/SD-192MX AND SD-232 Programming Manual

Here you can view all the pages of manual Siemens SD-192/SD-192MX AND SD-232 Programming Manual. The Siemens manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 21

EXECUTIVE f=-RY COMBINATION(THE-Exercise 
#lThe following Executive/Private Secretary combination will be used.
Extension 1300 will appear on Line A of both instruments.
Answer Phrase is Siemens.
Extension will ring at Secretary.
Direct Forward Destination is Ext. 200.
Extension 1301 will appear on Line B of both instruments.
Answer Phrase is JANE DOE.
Extension will ring at Secretary.
’ Direct Forward Destination is Ext. 211.
The executive’s ring arrangement is full screening of 
Calls.
SECRETARY...

Page 22

EXECUTIVERY W4.iUNATION
IONE PBX LINE ON BOTH INSTW4E.DTS. ANOTHERCUTIVE INSTRUMENT ONLY)Exercise 
#2The following Executive/Private Secretary combination will be used.
Extension 1300 will appear on Line A of both instruments.
Answer Phrase is Siemens.
Extension will ring at Secretary.,’
Direct Forward Destination is Ext. 200.
Extension 1301 will appear on Line B of the executive’s instrument only.
(Direct Forward Destination is Ext. 
211.The executive’s ring arrangement is duplicate ringing.
SECRETARY...

Page 23

ON ROTH 1-s SECOND PBX m TO SEC- ONJ,Y.
THIRD PBX LINE TO EXECUTIVE OuExercise 
13The following Executive/Private Secretary combination will be used.
Extension 1300 will appear on Line A of both instruments.
Answer Phrase is Siemens.
Extension Will ring at Secretary.
Direct Forward Destination is Ext. 200.
Extension 1301 will appear on Line B of the Secretary’s instrument only.
Direct Forward Destination is Ext. 
211.Extension 1302 will appear on Line B of the executive’s instrument only.
Direct Forward...

Page 24

,
PRIVATESE-
Press STORE, FEATURE +, 0, t buttons in sequence. (Disregard INVALID
display between buttons.)
/ SELECT MASK ( 0-9)Enterand STOREI
j SELECT MODELi
1 SECT-l, EXEC-2I
Enter1and STORE
i -i
; SECRETARY 1, 2 ORIEnter3and STORE
1 PRIVATE=3I
Press STORE and COM. (3rd ivory button in bottom row) in sequence
) WIRED FOR INTERCOM?
1 YES=l, NO=2
Enterand STORE
iI
1 EXTENSION FOR
1 LINE Xl:/
iI
II
iI
) EXTENSION FOR
I LINE A:
1 EXTENSION FORI
1 LINE B:I
Enterand STORE
(Executives first extension...

Page 25

?RIVATE SECRET= (continued
To display the programmed lines, perform the following procedure:
Press DISPLAY and COM (3rd ivory butt0n.i.n bottom row) in sequence
II WHICH LINE ?
IA-l,B=2
Enterand STORE
INTERCOM 
wired
YES or NOLine requested (A or B)
II
VV
i COM= YESLINE A I
I Xl4001
IExtension number of requested line (XNONE if none is assigned)
HEADSET IN PUCE OF HANDaT
Press STORE and HANGUP buttons in sequence
) SELECT HANDSET = 1
f OR HEADSET = 2
Enterand STORE
-
-25- 

Page 26

.
PRIVATE Sm (continued)
ANSWER PHRASE (Programmed at Secretary Stations only)
Press the STORE and STATUS buttons in sequence
EXECUTIVES LINE NUMBER
(1st display shows highest)
IVIf the extension does not ring here,
enter BACK, and next extension will
be displayed.
i 2 BACK, UP, DN?
I x01If the extension rings here, press
the VOLUMEbutton.
.ILast two digits of
EXECUTIVES LINE NUMBERNote: Pressing the VOLUME
button
removes the extension from
this secretary station
1 ANSWER PHRASE?
III
Press tone pad key...

Page 27

II .
1 USE: l=Q, 2--Z, 3=-I
ISelect desired character
PRIVATS(continued)
Display shows the result of
pressing the 8 (QZ-) key in
the previous step.
Continue the procedure until the phrase is finished (12 characters
including spaces maximum),
then press the STORE button. -
1I RING HERE?
1 YES-l, NO=2, DELAY=3Enter
and STORE
i -I
Note :Delayed is used if the call goes to a conventional instrument (2500)
first and rings the secretary if not answered within a given time,.
i 1 BACK, UP, DN?
I x00
Next lower...

Page 28

DIRECTED Fv
Press STORE and DIRECT FORWARD buttons in sequence
I1 FORWARD LINE A
I TOEnterand STORE
I
1 FORWARD LINE B
I TO
Enterand STORE
To display DIRECT FORWARD, perform the following procedure:
Press DISPLAY and DIRECT FORWARD buttons in sequence
II
I WHICH LINE?
1 A=l, B=2Enterand STORE
Line being displayed
IV
1 AFWD TO 1400I
IIA
IStation to which chosen line is forwarded
-- :,>.:::  ,’/
-28- 

Page 29

CUTIVE*(with SECRETARY)
Press STORE, FEATURE+, 0, 
# buttons in sequence. (Disregard INVALID
display between buttons.)
I
1 SELECT MASK (0-9)Enter‘and STORE
1 SELECT MODEL
1 SECT-l, EXEC=2Enter 2
and STORE
Press STORE and COM (3rd ivory button in bottom row) in sequence
II
i
1I
Enterand STORE
I
I EXTENSION FOREnterand STORE
I LINE B:
II
Note :If an extension is a private line, enter # for extension number.
To display the programmed lines, perform the following procedure:
Press DISPLAY and COM (3rd ivory...

Page 30

IVE.(with SECRETW(continued)
NG ARRANGE= AND DIRECT FORWARD DESTIQ&m
Unplug the line cord of the Secretary set associated with this station
and plug it back in.
Press STORE and DIRECT FORWARD buttons in sequence
j T;N;lRRANGEMENTI 
-
Select number from table below,
enter number and STORE.
If just STORE is pressed, it,
defaults to arrangement 1.
1Duplicate ringing.Rings both secretarys and executives
phones.
2Delayed duplicateringing.Rings at executives phone.
After two rings,the call also rings at the...
Start reading Siemens SD-192/SD-192MX AND SD-232 Programming Manual

Related Manuals for Siemens SD-192/SD-192MX AND SD-232 Programming Manual

All Siemens manuals