Singer Serger Professional 5 Manual

 
Double Chain Stitch 
 

 
 
4. Turn the hand wheel toward you until  the Chainstitch Looper extends out   
               10mm (approximately ½”)  from the needle plate edge. 
 
 
 
 
 
 
 
 
 
 
  5. Thread the looper area of the ma chine following the brown color-coded  
               thread guides 4-11.  Us e the tweezers provided in the accessory case to  
               aid in threading the looper. 
  
  6. Place the thread through threading guide  f and  g. 
 
 
           7. Continue threading guides  h, i , j  and  k....

 
  5. Continue to thread points 4-8.  Slip the thread into the middle slot of the  
      thread guide  g.  Go over the take up lever  h.  Continue by slipping the  
               thread into the middle  slot of the thread guides i and  j.  
 
  6. Before threading the eye of the needle,  make sure the thread is in front
 of  
               the thread guide located on the bottom  of the needle clamp for the Cover  
                Stitch or Chainstitch. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  
  
  7. Thread...

 
   
  
 
                   
 
                                   
Chapter 2: 
           Two-Thread Wrapped Edge    
    Overlock (narrow and wide)