Sony Clie Peg Sj22 Handheld Instructions Manual

							Customizing your Sony CLIÉ™ handheld (Preferences)71
Sony Personal Entertainment Organizer  A-BGK-100-11 (1)
Setting the High Resolution Assist function
You can use the High Resolution Assist function to enable the high resolution 
display of an application that even does not support the high resolution mode. By 
default, the High Resolution Assist function is not set. 
1Tap the arrow V in the upper right corner of the Preferences 
screen and select HiRes.
The HiRes Preferences screen is displayed.
2Tap the Enable High Resolution Assist check box to 
select.
The confirmation dialog box is displayed.
3Tap OK.
The HiRes preferences screen is displayed.
4Tap an application(s) that you do not want to display in the 
high resolution mode in the list box.
Note
Quit the High Resolution Assist function if the following occurs.
 Performances are largely deteriorated (e.g. game).
 Display is divided into two, characters are distorted, or other operational 
irregularities occur. 
						

							Customizing your Sony CLIÉ™ handheld (Preferences)72
Sony Personal Entertainment Organizer  A-BGK-100-11 (1)
Setting the JogAssist function
You can set the Jog Dial™ navigator to operate third-party applications that are 
not designed to use the Jog Dial™ navigator operations. The JogAssist 
function enables you to perform the following operations.
 You can scroll the screen with the Jog Dial™ navigator.
 You can select an item from the PopUp list with the Jog Dial™ navigator.
 You can move back and forth between screens with the BACK button.
You can also set the BACK button to turn on or off your CLIÉ handheld when 
the BACK button is kept pressed.
Notes
 The operations activated by the JogAssist function may differ depending on the 
application you use.
 In some applications with the Jog Dial™ navigator mark, part of operations may differ 
when the JogAssist function is activated and not activated.
1Tap the arrow V in the upper right corner of the Preferences 
screen and select Jog.
The Jog Preferences screen is displayed.
2Tap the Use JogAssist check box to clear the selection 
when you do not want to use the JogAssist function.
3To set to turn on your CLIÉ handheld by keeping the BACK 
button pressed, tap the Power On with BACK button check 
box to select.
You need to keep the BACK button pressed for several seconds to turn on 
your CLIÉ handheld.
Continued on next page
• • • • • • • • • • • • • • • 
						

							Customizing your Sony CLIÉ™ handheld (Preferences)73
Sony Personal Entertainment Organizer  A-BGK-100-11 (1)
Setting the JogAssist function
4To set to turn off your CLIÉ handheld by keeping the BACK 
button pressed, tap the Power Off check box to select.
The Jog Dial™ navigator settings are changed.
Tip
By default, the selections of Use JogAssist and Display Cursor/Menu are 
selected, and Power On with BACK button and Power Off are not selected. 
						

							Customizing your Sony CLIÉ™ handheld (Preferences)74
Sony Personal Entertainment Organizer  A-BGK-100-11 (1)
Changing the Network preferences
Note
For the settings specific to each peripheral device, refer to the manual of each peripheral 
device.
Selecting a service template
You can customize the Service setting to select the service template for your 
Internet Service Provider or a dial-in server. 
1Tap the arrow V in the upper right corner of the Preferences 
screen and select Network.
The Network Preferences screen is displayed.
2Tap the arrow V next to Service and select the service 
template (Internet Service Provider name) you want to use.
Tips
 To add a new service template, select New from the Service menu.
If the Internet Service Provider name you want to use is not displayed in the list, 
tap the area showing the service template, or select New from the Service 
menu, and enter the new Internet Service Provider name.
You can create multiple service templates for your Internet Service Provider. 
You need to name them so that those service templates are uniquely identified, 
such as “So-net1” and “So-net2.” It is useful for creative use of your Internet 
Service Provider by access point or setting.
 When you want to copy an existing service template without changing, select 
Duplicate from the Service menu. 
						

							Customizing your Sony CLIÉ™ handheld (Preferences)75
Sony Personal Entertainment Organizer  A-BGK-100-11 (1)
Changing the Network preferences
Entering a user name
The User Name setting identifies a name you use when you log into your 
Internet Service Provider or dial-in server.
1On the Network Preferences screen, tap User Name field.
2Enter your user name.
Notes
 Although this field can contain multiple lines of text, only two lines appear on 
the screen.
 Most dial-in servers do not accept spaces in the user name.
Entering a password
The Password box identifies a password you use to log into your server or ISP. 
Your entry in this field determines whether your CLIÉ handheld prompts you 
to enter a password each time you log into your network:
 If you do not enter a password, your CLIÉ handheld displays the word 
-Prompt- in this field and asks you to enter a password during the log-in 
procedure.
 If you enter a password, your CLIÉ handheld displays the word 
-Assigned- in this field and does not prompt you to enter a password during 
the log-in procedure.
Note
If you are concerned about security, select the Prompt option and do not enter a 
password.
1On the Network Preferences screen, tap the Password 
field.
2Enter a password you use to log into your server.
3Tap OK.
The Password field updates to display the word -Assigned-. 
						

							Customizing your Sony CLIÉ™ handheld (Preferences)76
Sony Personal Entertainment Organizer  A-BGK-100-11 (1)
Changing the Network preferences
Selecting a connection
Use the Connection setting to select a method you want to use to connect to 
your Internet Service Provider or a dial-in server.
1On the Network Preferences screen, tap the arrow V next 
to Connection and select Standard Modem.
Adding telephone settings
When you select the Phone field, your CLIÉ handheld opens a screen in 
which you define the telephone number you use to connect with your ISP or 
dial-in server. In addition, you can also define a prefix, disable Call Waiting, 
and give special instructions for using a calling card.
Note
The Phone Setup screen works correctly for AT&T and Sprint long- distance 
services. However, because MCI works differently, MCI customers need to put 
the calling card number in the Phone # field and the phone number in the Use 
calling card field.
1On the Network Preferences screen, tap the Phone field.
The Phone Setup screen is displayed.
2Enter the phone number for your ISP or dial-in server in the 
Phone # field.
3Change the following settings if necessary:
1Enter the telephone number used to access the modem.
If necessary, enter a dial prefix (such as “9”) to access an outside line, 
and select the Dial prefix check box. You can enter a comma in the 
field to introduce a “pause” in the dialing sequence. Each comma 
equals a two second pause.
2If the phone line you are using for your CLIÉ handheld has Call 
Waiting, select the Disable call waiting check box to avoid an 
interruption during the modem HotSync
® operation.
Continued on next page
• • • • • • • • • • • • • • • 
						

							Customizing your Sony CLIÉ™ handheld (Preferences)77
Sony Personal Entertainment Organizer  A-BGK-100-11 (1)
Changing the Network preferences
Note
Each telephone company assigns a code to disable Call Waiting. Contact your 
local telephone company for the code that you need.
3If you want to use a calling card to place the call, select the Use 
calling card check box and enter the calling card number.
Tip
There is usually a delay before you enter your calling card number.
Consequently, add at least three commas before your calling card number to 
compensate for the delay.
4Tap OK.
Adding detailed information to a service template
When you are using one of the predefined service templates, you probably need 
to enter your user name and telephone number only. When you are creating a 
new service template, you may need to provide additional information to your 
ISP or dial-in server. Use the Details screen to add additional information to 
a selected service template.
To select a connection type
1On the Network Preferences screen, tap Details.
The Details screen is displayed.
2Tap the arrow V next to Connection type and select one of 
the following connection types.
PPP: Point-to-Point Protocol
SLIP: Serial Line Internet Protocol
CSLIP: Compressed Serial Line Internet Protocol
Tip
If you are not sure, try PPP; if that does not work, ask your Internet Service Provider 
or your System Administrator for the correct connection type.
Continued on next page
• • • • • • • • • • • • • • • 
						

							Customizing your Sony CLIÉ™ handheld (Preferences)78
Sony Personal Entertainment Organizer  A-BGK-100-11 (1)
Changing the Network preferences
3Tap the arrow V next to Idle timeout and select one of the 
following options.
1 Minute: Waits one minute before dropping the connection when you open 
another application that does not use the network. 1 Minute is assigned by 
default.
2 Minutes: Waits two minutes.
3 Minutes: Waits three minutes.
Never: Keeps your PPP or SLIP connection until you turn off your CLIÉ 
handheld.
Note that this option will be more costly than others.
4Tap the Query DNS check box to clear.
5Enter the IP address for the Primary and Secondary DNS 
(Domain Naming System).
Ask your Internet Service Provider or System Administrator for the 
correct Primary or Secondary DNS IP numbers.
6If you need to enter the IP address for your CLIÉ handheld, 
tap the IP Address check box to clear the selection and 
display a permanent IP address field below the check box.
Normally, you do not have to enter this IP address. If you are not sure, 
select Automatic and go to step 8.
7Enter the IP address for your CLIÉ handheld.
Ask your Internet Service Provider or System Administrator for the 
correct IP address.
8Tap OK. 
						

							Customizing your Sony CLIÉ™ handheld (Preferences)79
Sony Personal Entertainment Organizer  A-BGK-100-11 (1)
Changing the Network preferences
Creating additional service templates
You can create additional service templates from scratch or by duplicating 
existing templates and editing the information. After you create a new or 
duplicate template, you can add and edit settings.
To duplicate an existing service template
1On the Network Preferences screen, tap the arrow V next 
to Service and select the predefined service template you 
want to duplicate.
2Tap the Menu   icon.
3Tap Duplicate from the Service menu.
A copy of the service template (The name of an original service 
template + Copy) is added to the drop-down list for the Service field.
To delete a service template
You can delete an existing service template.
1On the Network Preferences screen, tap the arrow V next 
to Service and select the predefined service template you 
want to delete.
2Tap the Menu   icon.
3Tap Delete from the Service menu.
The Delete Service dialog box is displayed.
4Tap OK.
The selected service template is deleted.
If you want to cancel deleting, tap Cancel. 
						

							Customizing your Sony CLIÉ™ handheld (Preferences)80
Sony Personal Entertainment Organizer  A-BGK-100-11 (1)
Changing the Network preferences
Creating Log-in Scripts
A log-in script is a series of commands that automates logging in to a network 
server, such as your corporate network or your Internet Service Provider (ISP).
You can also use non-ASCII characters or literal characters for log-in scripts.
bFor details, refer to “Non-ASCII Characters for Log-in Scripts” on page 82.
Note
Depending on the type of communication adapter (sold separately), there may be cases 
when there is no need to create a log-in script.
bFor details on accessories that are not supplied, refer to “Read This First (Operating 
Instructions).”
1On the Network Preferences screen, tap Details.
The Details screen is displayed.
2Tap Script.
The Log in Script screen is displayed.
3Tap the arrow V next to End and select one of the following 
commands.
When the command requires additional information, a field appears to the 
right of it for you to enter the information.
Wait ForTells your CLIÉ handheld to wait for specific characters 
from the TCP/IP server before executing the next 
command.
Wait For PromptDetects a challenge-response prompt coming from the 
server and displays the dynamically generated challenge 
value. It then enters the challenge value into your token 
card, which in turn generates a response value for you to 
enter on your CLIÉ handheld. This command takes two 
arguments, separated by a vertical bar (|) on the input 
line.
SendTransmits specific characters to the TCP/IP server to 
which you are connecting.
Send CRTransmits a carriage return or LF character to the TCP/
IP server to which you are connecting.
Send User IDTransmits the User ID information entered in the User 
ID field of the Network Preferences screen.
Continued on next page
• • • • • • • • • • • • • • •