Sony Clie Peg Tj25 Handheld Instructions Manual

							121
Performing the HotSync® operation via LAN (LANSync)
Exchanging and updating files/data using the HotSync® 
operation (Other HotSync® operations)
6Connect your CLIÉ handheld to your computer with a USB 
cable.
7Rotate the Jog Dial™ navigator to select   (HotSync) on 
the CLIE Launcher and press the Jog Dial™ navigator.
8Tap  (HotSync).
The computer information (Primary PC name and Primary PC address (IP 
address)) is transferred to your CLIÉ handheld. 
When you perform the HotSync
® operation via LAN, your CLIÉ 
handheld identifies the computer based on the transferred information.
Preparing your CLIÉ handheld
Follow the steps below to set up your CLIÉ handheld for the HotSync® 
operation via the LAN.
1Rotate the Jog Dial™ navigator to select   (HotSync) on 
the CLIE Launcher and press the Jog Dial™ navigator.
The HotSync screen is displayed.
Tip
You can also tap   (HotSync) to display the HotSync screen.
2Tap [Local].
3Tap  (Menu).
The menu is displayed.
4Tap [LANSync Prefs...] from [Options].
The LANSync Preferences screen is displayed.
5Tap [LANSync].Continued on next page
• • • • • • • • • • • • • • • 
						

							122
Performing the HotSync® operation via LAN (LANSync)
Exchanging and updating files/data using the HotSync® 
operation (Other HotSync® operations)
6Tap [OK].
The HotSync screen is displayed again.
Performing the LANSync operation
You can perform the LANSync operation when you have prepared your 
computer settings, CLIÉ handheld settings, and Conduit Setup. Turn on the 
computers and start HotSync
® Manager.
Note
To perform the LANSync operation, both the computer connected to your CLIÉ 
handheld and the computer performing the HotSync® operation should be set for 
LANSync. Also, click   (HotSync) to display the shortcut menu in the Windows task 
tray (Notification area) at the bottom right of the computer window on each computer 
and make sure that [Network] in the shortcut menu is selected (If not, click [Network] to 
select it).
1Rotate the Jog Dial™ navigator to select   (HotSync) on 
the CLIE Launcher, and press the Jog Dial™ navigator.
The HotSync screen is displayed.
Tip
You can also tap   (HotSync) to display the HotSync screen.
2Tap  (HotSync).
The HotSync® operation starts. 
A message will be displayed when the HotSync® operation is complete. 
						

							Using 
“Memory Stick™” 
media
This chapter explains how to communicate with another 
Palm OS® PDA device via “Memory Stick” media, how to 
handle “Memory Stick” media, and how to use CLIE Files for 
managing the files/data on “Memory Stick” media.
Using “Memory Stick™” media . . . . . . . . . . .   124
Exchanging data via 
“Memory Stick” media . . . . . . . . . . . . . .   134 
						

							Using “Memory Stick™” media124
Using “Memory Stick™” media
The type of storage media you can use with your CLIÉ handheld
You can use your CLIÉ handheld with “Memory Stick” media as the storage 
media. “Memory Stick” media is specially designed for exchanging and sharing 
files/data among “Memory Stick” media compatible products. Because it is 
removable, “Memory Stick” media can also be used for external files/data 
storage.
“Memory Stick” media enable you to exchange files/data between your CLIÉ 
handheld and a computer. To exchange files/data via “Memory Stick” media, 
you can use CLIE Files, supplied with your CLIÉ handheld.
Using “Memory Stick” media
There are two types of “Memory Stick” media:
 “MagicGate Memory Stick” media, which is equipped with “MagicGate”* 
copyright protection technology.
 “Memory Stick” media, which is not equipped with “MagicGate” copyright 
protection technology.
*What is MagicGate?
MagicGate is the copyright protection technology that is used for “MagicGate Memory 
Stick” media and MagicGate compatible devices, such as a CLIÉ handheld. MagicGate 
certifies the compatible device and “MagicGate Memory Stick” media as copyright 
protection-compatible devices and encodes files/data to be played back on devices. 
Copyrighted files/data cannot be played back on non-certified devices.
“Memory Stick Duo”, “MagicGate Memory Stick Duo”, and “Memory Stick 
PRO”** can be used with your CLIÉ handheld.
However, you cannot store/play-back the files/data which is equipped with 
“MagicGate” copyright protection technology.
** You can use the “Memory Stick PRO” MSX-1G, MSX-512, and MSX-256 with your 
CLIÉ handheld.
However, you cannot record or play back files/data that have been copyright 
protected with the MagicGate function.
bFor the latest information, refer to the URL shown on the last page of this manual.
Continued on next page
• • • • • • • • • • • • • • • 
						

							Using “Memory Stick™” media125
Using “Memory Stick™” media
Note on using “MagicGate Memory Stick” media
Do not handle copyright-protected files/data or directories stored on 
“MagicGate Memory Stick” media with CLIE Files or Windows® Explorer, 
otherwise the files/data may be disabled. To handle copyright-protected files/
data, use a “MagicGate” compliant application.
Notes
When using a “Memory Stick Duo” media with your CLIÉ handheld
 Make sure you use a “Memory Stick Duo” adaptor.
 Make sure you insert a “Memory Stick Duo” media into the “Memory Stick 
Duo” adaptor in the right direction.
 Make sure you insert a “Memory Stick Duo” media into the adaptor before 
you insert the adaptor into the “Memory Stick” slot of your CLIÉ handheld.
 Make sure you insert a “Memory Stick Duo” adaptor into the “Memory 
Stick” slot of your CLIÉ handheld in the right direction.
Notes on using “Memory Stick” media
When you use “Memory Stick” media, follow the precautions below.
 Avoid touching the terminals of “Memory Stick” media with your fingers or 
a metal object.
 Do not drop, bend, or expose “Memory Stick” media to external shock.
 Do not disassemble or modify “Memory Stick” media.
 Avoid getting liquid on “Memory Stick” media.
 Avoid using or storing “Memory Stick” media in a location subject to:
– extremely high temperature such as inside a hot car, outdoors in direct 
sunlight, or near a heater
– direct sunlight – high humidity
– corrosive substances – excessive dust
– magnetic fields
 When storing and carrying “Memory Stick” media, keep it in its original case 
to ensure protection of important files/data.
 Make a backup of important files/data.
 Avoid removing “Memory Stick” media from the insertion slot while files/
data is being written or read.
 To avoid damaging or erasing files/data, do not
– pull out “Memory Stick” media or unplug the AC power adaptor while 
formatting, or reading or writing files/data.
– use “Memory Stick” media in a location subject to static electricity or 
electrical interference.
Continued on next page
• • • • • • • • • • • • • • • 
						

							Using “Memory Stick™” media126
Using “Memory Stick™” media
 If the battery power of your CLIÉ handheld is running low, an error message 
is displayed and you cannot exchange files/data with “Memory Stick” 
media. If this occurs, connect the AC power adaptor with plug adaptor to 
your CLIÉ handheld or fully charge your CLIÉ handheld.
Use CLIE Files to format the “Memory Stick” media you use in your CLIÉ 
handheld. If you format it using another application, further operation with 
your CLIÉ handheld is not guaranteed.
 If you insert “Memory Stick” media that has been formatted by another 
application, a message prompting you to reformat it is displayed. To use 
“Memory Stick” media in your CLIÉ handheld, follow the instructions to 
format it. Note, however, that all stored files/data will be erased.
 Make sure you use a suitable label on the “Memory Stick” media. 
						

							Using “Memory Stick™” media127
Using “Memory Stick™” media
Protecting the files/data on “Memory Stick” media
To prevent accidental erasure of important files/data, you can use the write 
protect tab on the “Memory Stick” media. 
Write enable position
Slide the tab to the left to select the write enable position. You can read and 
write files/data on the “Memory Stick” media.
Write protect position (LOCK)
Slide the tab to the right to select the write protect position. You can only read 
the files/data on the “Memory Stick” media. Select the write protect position 
when you insert “Memory Stick” media containing any important files/data 
that you do not want to accidentally delete or overwrite.
Tip
Shape or exact location of the tab may differ from the illustration.
LOCK
Back side
Write Enable 
PositionWrite Protect 
Position 
						

							Using “Memory Stick™” media128
Using “Memory Stick™” media
Starting an application on “Memory Stick” media
You can start applications on “Memory Stick” media in the same way as applications on 
your CLIÉ handheld. While the power of your CLIÉ handheld is on, the applications in 
the “Memory Stick” media will be displayed on the CLIE Launcher automatically when 
you insert the “Memory Stick” media into the slot. (The feature does not work when 
certain applications are running).
To switch from the CLIE Launcher to the screen where the applications in “Memory 
Stick” media are displayed, perform the following steps.
Note
Starting application supplied with your CLIE handheld from “Memory Stick” media is 
not supported.
Tip
You can only start the applications stored in the [/Palm/Launcher] directory.
1Insert the “Memory Stick” media into your CLIÉ handheld.
2Move the selection area to the CLIE Launcher groups list by 
pressing   (the Left button) on the CLIE Launcher.
Continued on next page
• • • • • • • • • • • • • • • 
						

							Using “Memory Stick™” media129
Using “Memory Stick™” media
3Select   (Card) by rotating the Jog Dial™ navigator, or by 
tap  (Card).
The applications stored in the [/Palm/Launcher] directory on “Memory 
Stick” media are displayed.
You can start an application in the same way that you start an application 
of your CLIÉ handheld.
If you have assigned a name to “Memory Stick” media, then the   (Card 
Name) is displayed in that name.
Note
Depending on the application, some of the features may not work if you start the 
application on “Memory Stick” media. In this case, use CLIE Files to copy the files/data 
in your CLIÉ handheld and use the copied files/data. 
						

							Using “Memory Stick™” media130
Using “Memory Stick™” media
Viewing information of “Memory Stick” media (Card Info)
You can view information (e.g., remaining memory space) of “Memory Stick” 
media with Card Info. 
1Insert the “Memory Stick” media into your CLIÉ handheld.
2Rotate the Jog Dial™ navigator to select   (Card Info) on 
the CLIE Launcher and press the Jog Dial™ navigator.
The Card Info screen is displayed.
Tip
You can also tap   (Card Info) to display the Card Info screen.
3Tap V next to [Card:] to select “Memory Stick” media.
The information screen of “Memory Stick” media is displayed.