Sony Projector Vpl Ps10 User Manual

21 (GB)
To connect 15k RGB/Component
equipment
Notes
• Set the aspect ratio using ASPECT in the INPUT
SETTING menu according to the input signal.
For details, see page 30 (GB).
• When you connect the projector to 15k RGB/
component video equipment, select RGB,
component or VCR GBR with the INPUT-A setting
in the SET SETTING menu.
• Use the composite sync signal when you input the
external sync signal from 15k RGB/component
equipment.
MOUSE
CTRL S
PLUG IN POWER
AUDIO
AUDIOVIDEOS VIDEO
INPUT A~AC IN...

22 (GB)
Connection using a wireless LAN PC card
INPUT B
PC CARD
INPUT A~AC IN
PUSH
Connecting the Projector
Left side of the projector Wireless LAN PC card
(IEEE802.11b compliant)
(recommended)
Computer
Wireless LAN
access point
(IEEE802.11b
compliant)
(recommended)Wireless LAN PC card
(IEEE802.11b compliant) (specified)
to Hub/router
Wireless LAN PC card
(IEEE802.11b compliant)
(recommended)Computer
Connection using a wireless LAN PC card
(Peer to Peer mode)
INPUT B
PC CARD
INPUT A~AC IN
PUSH
Left side...

23 (GB)
.........................................................................................................................................................................................................
1) PowerPoint is a registered trademark of Microsoft Corporation (U.S.A. and other countries).
INPUT B
PC CARD
INPUT A~AC IN
PUSH
Computer
Left side of the projector to router
LAN cableHubComputer
Computer LAN cableLAN cable
LAN cable
Connecting using the ETHER connector
Installing a memory card
If...

24 (GB)
HELP LAMP/
COVERTEMP/
FANPOWER
SAVINGON/
STANDBY
RESET APA VOLUME
ENTERINPUT MENU
MUTINGPICAUDIO
HELP
APA
LASER
INPUTD KEYSTONE
FREEZE
PJ NETWORKON COMMAND
OFF
VOLUME
ENTER
FUNCTION
RM-PJM15
PROJECTOR
D ZOOMCLICKRESET/
ESCAPE
MENU/
TAB
R
1
23
2
332
I / 1
INPUT
FREEZE
MENU ENTER
D KEYSTONEMS SLIDE
RESET
FUNCTIOND ZOOM12
APA
+
–RCLICK
Selecting the Menu Language / Projecting
5Press the M or m key to select LANGUAGE, then
press the , or ENTER key.
6Press the M or m key to select a language, then...

25 (GB)
Notes
•Adjust the signal when a still picture is displayed on
the screen.
•Press the APA key when the full image is displayed
on the screen. If there are black edges around the
image, the APA function will not function properly
and the image may extend beyond the screen.
•If you switch the input signal or re-connect a
computer, press the APA key again to get the
suitable picture.
•“ADJUSTING” appears on the screen. To restore the
original screen, press the APA key again during the
adjustment....

26 (GB)
To enlarge the image (Digital Zoom
function)
You can enlarge an area on the image you select.
This function works only when a signal from a
computer is input.
1Project the original size picture and press the D
ZOOM + key on the Remote Commander.
The Digital Zoom icon appears in the center of the
image.
2Move the icon to a point in the center of the
portion of the image you want to enlarge. Use the
arrow keys (M/m/

27 (GB)
Using the Menu
Using the Menu
The projector is equipped with an on-screen menu for
making various adjustments and settings.
Note
(VPL-PX15/PX10 only)
Before operation, confirm that the PJ/NETWORK
select switch on the Remote Commander is set to PJ.
If it is set to NETWORK, the menu display will not
appear even when you press the MENU key on the
Remote Commander.
To select the language used in the menu, see page
23 (GB).
1Press the MENU key.
The menu display appears.
The menu presently selected is...

28 (GB)
The PICTURE CTRL Menu
The PICTURE CTRL Menu
The PICTURE CTRL (control) menu is used for
adjusting the picture.
Unadjustable items for a particular input signal are not
displayed in the menu.
Operation
1. Select an item
Use the M or m key to select the item, then press the
, or ENTER key.
2. Adjust an item
•When changing the adjustment level:
To increase the value, press the M or , key.
To decrease the value, press the m or < key.
Press the ENTER key to restore the original screen.
•When changing...

29 (GB)
COLOR SYS (System)
Selects the color system of the input signal.
AUTO: Automatically selects one of the following
signals: NTSC
3.58, PAL, SECAM, NTSC4.43.
PAL-M/N: Automatically selects one of the
following signals: PAL-M/PAL-N, NTSC
3.58.
Normally, set to AUTO.
If the picture is distorted or colorless, select the color
system appropriate to the input signal.
VOLUME
Adjusts the volume. The volume can be adjusted for
each of INPUT A, INPUT B (VPL-PX15 only),
VIDEO and S VIDEO input.
Input signals...

30 (GB)
SIZE H
Adjusts the horizontal size of the picture input from
the INPUT A/B connector.
The higher the setting, the larger the horizontal size of
the picture.
The lower the setting, the smaller the horizontal size
of the picture. Adjust the setting according to the dots
of the input signal.
For details on a suitable value for preset signals, see page
31 (GB).
SHIFT
Adjusts the position of the picture input from the
INPUT A/B connectors or video input connectors.
H adjusts the horizontal position of...