Standard Horizon Receiver Phantom Series PS1000 Operating Instructions

Page 41 Phantom PS1000
6. Press the [

]
 or [
]
 key to select the first letter of the name
of the group you want to reference in the directory.
7. Press the [
CALL(
SET)
MENU]
 key to store the first letter in
the name and step to the next letter to the right.
8. Repeat step 6 and 7 until the name is complete. The name
can consist of up to eleven characters, if you do not use all
eleven characters press the [
CALL(
SET)
MENU]
 key to move
to the next space. This method can also be used to enter a...

 Phantom PS1000 Page 42
11.7.3 Receiving a Group Call
1. When a group call is received, “RECEIVED GROUP” will ap-
pear on the LCD, and a ringing alarm sound.
2. The radio automatically switches to the requested channel.
3. Press any key to stop the alarm.
4. Press the [

]
 or [
]
 key to see the MMSI of the vessel
transmitting the Group Call.
5. Monitor the channel for the person calling the Group for a
message.
6. If you want to respond, monitor the channel to make sure it is clear, then
press the PTT...

Page 43 Phantom PS1000
1. Press and hold down the [
CALL(
SET)
MENU]
 key
until “
RADIO SETUP” menu appears.
2. Press the [

]
 key to select “
DSC SETUP” menu,
then press the [
CALL(
SET)
MENU]
 key.
3. Press the [

]
 or [
]
 key to select “
POS REQUEST”
menu, then press the [
CALL(
SET)
MENU]
 key.
4. Press the [

]
 or [
]
 key to select “
Au” or “oF.”
In “
Au” mode, after a DSC Position Request is re-
ceived, the radio will automatically transmit your vessels po-
sition. In “
oF” mode, the CMP25...

 Phantom PS1000 Page 44
Position Request DSC signal.
5. After a DSC position request is transmitted, the trans-
ceiver remains on channel 70 until position data is
received from the polled vessel.
6. When the Phantom PS1000 receives the position
from the polled vessel, 
RECEIVED POS REPLY” will
appear on the LCD.
7. Press the [

]
 or [
]
 key to see the name and posi-
tion (LAT/LOG) of the vessel polled vessel.
8. If the Phantom PS1000 does not receive a reply,
the LCD will display “
NO REPLY.” Press...

Page 45 Phantom PS1000
3 Select type of reply function “SEND” or “NO REPLY”
by using the [

]
 or [
]
 key.
4. When “
SEND” is selected, press the
[
CALL(
SET)
MENU]
 key. And your position will be
transmitted to the requesting vessel.
5. To exit from position request display, press the [
16/9]
 key.
11.9  POSITION SEND
The feature is similar to Position Request, however instead of requesting a
position of another vessel this function allows you to send your position to an-
other vessel. Your vessel...

 Phantom PS1000 Page 46
11.9.3 Receiving a DSC Position Send Call
When another vessel transmits their vessels location to the PS1000 the follow-
ing will happen:
1. When the Position Send Call is received, “
RECEIVED POS
SEND
” will appear on the LCD and a ringing sound will be
produced.
2. Press any key to stop ringing.
3. Press the [

]
 or [
]
 key to see the name and posi-
tion (LAT/LOG) of the of the vessel transmitting the
Position Send Call. 

Page 47 Phantom PS1000
MEMO 

 Phantom PS1000 Page 48
12  RADIO SETUP
12.1 LCD DIMMER
This selection sets up the display backlight intensity or to turn it off. Default
setting is level “3.”
1. Press and hold down the [
CALL(
SET)
MENU]
 key until
“
RADIO SETUP” menu appears.
2. Press the [
CALL(
SET)
MENU]
 key, then press the [

]
 or
[
]
 key to select “
DIMMER” menu.
3. Press the [
CALL(
SET)
MENU]
 key.
4. Press the [

]
 or [
]
 key to select the desired level. You will
be able to see the effects of your changes. The dimmer...

Page 49 Phantom PS1000
12.3 TIME OFFSET
This selection sets the time offset between local time and UTC (time GPS
sends to radio). Time is displayed when GPS position (LAT/LON) is displayed
by pressing the [
NAV]
 key. Default setting is level “00.”
1. Press and hold down the [
CALL(
SET)
MENU]
 key until
“
RADIO SETUP” menu appears.
2. Press the [
CALL(
SET)
MENU]
 key, then press the [

]
 or
[
]
 key to select “
TIME” menu.
3. Press the [
CALL(
SET)
MENU]
 key.
4. Press the [

]
 or [
]
 key to...

 Phantom PS1000 Page 50
“True” mode “Magnetic” mode
12.4  CHANGING GPS INFORMATION TO
VESSEL POSITION OR COG
Allows customizing the NAV data showing GPS Information. Factory default is
“Your Vessel’s Current Position,” however, following the steps below the GPS
Information can be changed to “Course Over Ground (COG).”
1. Press and hold down the [
CALL(
SET)
MENU]
 key until
“
RADIO SETUP” menu appears.
2. Press the [
CALL(
SET)
MENU]
 key, then press the [

]
 or
[
]
 key to select “
NAV DISPLAY” menu....